[PATCHv2,6/6] power: supply: gpio-charger: drop legacy GPIO support
diff mbox series

Message ID 20200605224403.181015-7-sebastian.reichel@collabora.com
State New
Headers show
Series
  • misc. gpio-charger patches
Related show

Commit Message

Sebastian Reichel June 5, 2020, 10:44 p.m. UTC
All board files have been converted to use boardfile GPIO
descriptor tables, so GPIO support can be removed from
platform data.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/gpio-charger.c | 30 +----------------------------
 include/linux/power/gpio-charger.h  |  5 -----
 2 files changed, 1 insertion(+), 34 deletions(-)

Comments

Linus Walleij June 10, 2020, 9:55 a.m. UTC | #1
On Sat, Jun 6, 2020 at 12:44 AM Sebastian Reichel
<sebastian.reichel@collabora.com> wrote:

> All board files have been converted to use boardfile GPIO
> descriptor tables, so GPIO support can be removed from
> platform data.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Thanks so much for doing this!
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Patch
diff mbox series

diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index 74fc664c01e3..8c9f69f3d13e 100644
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c
@@ -258,7 +258,6 @@  static int gpio_charger_probe(struct platform_device *pdev)
 	struct power_supply_desc *charger_desc;
 	struct gpio_desc *charge_status;
 	int charge_status_irq;
-	unsigned long flags;
 	int ret;
 	int num_props = 0;
 
@@ -272,41 +271,14 @@  static int gpio_charger_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	gpio_charger->dev = dev;
 
-	/*
-	 * This will fetch a GPIO descriptor from device tree, ACPI or
-	 * boardfile descriptor tables. It's good to try this first.
-	 */
 	gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
-
-	/*
-	 * Fallback to legacy platform data method, if no GPIO is specified
-	 * using boardfile descriptor tables.
-	 */
-	if (!gpio_charger->gpiod && pdata) {
-		/* Non-DT: use legacy GPIO numbers */
-		if (!gpio_is_valid(pdata->gpio)) {
-			dev_err(dev, "Invalid gpio pin in pdata\n");
-			return -EINVAL;
-		}
-		flags = GPIOF_IN;
-		if (pdata->gpio_active_low)
-			flags |= GPIOF_ACTIVE_LOW;
-		ret = devm_gpio_request_one(dev, pdata->gpio, flags,
-					    dev_name(dev));
-		if (ret) {
-			dev_err(dev, "Failed to request gpio pin: %d\n", ret);
-			return ret;
-		}
-		/* Then convert this to gpiod for now */
-		gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
-	} else if (IS_ERR(gpio_charger->gpiod)) {
+	if (IS_ERR(gpio_charger->gpiod)) {
 		/* Just try again if this happens */
 		if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
 		dev_err(dev, "error getting GPIO descriptor\n");
 		return PTR_ERR(gpio_charger->gpiod);
 	}
-
 	if (gpio_charger->gpiod) {
 		gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
 		num_props++;
diff --git a/include/linux/power/gpio-charger.h b/include/linux/power/gpio-charger.h
index 5a5a8de98181..3081391e93c9 100644
--- a/include/linux/power/gpio-charger.h
+++ b/include/linux/power/gpio-charger.h
@@ -13,8 +13,6 @@ 
  * struct gpio_charger_platform_data - platform_data for gpio_charger devices
  * @name:		Name for the chargers power_supply device
  * @type:		Type of the charger
- * @gpio:		GPIO which is used to indicate the chargers status
- * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
  * @supplied_to:	Array of battery names to which this chargers supplies power
  * @num_supplicants:	Number of entries in the supplied_to array
  */
@@ -22,9 +20,6 @@  struct gpio_charger_platform_data {
 	const char *name;
 	enum power_supply_type type;
 
-	int gpio;
-	int gpio_active_low;
-
 	char **supplied_to;
 	size_t num_supplicants;
 };