linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sre@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Emil Velikov <emil.velikov@collabora.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Daniel Mack <daniel@zonque.org>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Russell King <linux@armlinux.org.uk>,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@collabora.com,
	linux-arm-kernel@lists.infradead.org,
	Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCHv2 6/6] power: supply: gpio-charger: drop legacy GPIO support
Date: Sat,  6 Jun 2020 00:44:03 +0200	[thread overview]
Message-ID: <20200605224403.181015-7-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20200605224403.181015-1-sebastian.reichel@collabora.com>

All board files have been converted to use boardfile GPIO
descriptor tables, so GPIO support can be removed from
platform data.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/power/supply/gpio-charger.c | 30 +----------------------------
 include/linux/power/gpio-charger.h  |  5 -----
 2 files changed, 1 insertion(+), 34 deletions(-)

diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index 74fc664c01e3..8c9f69f3d13e 100644
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c
@@ -258,7 +258,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	struct power_supply_desc *charger_desc;
 	struct gpio_desc *charge_status;
 	int charge_status_irq;
-	unsigned long flags;
 	int ret;
 	int num_props = 0;
 
@@ -272,41 +271,14 @@ static int gpio_charger_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	gpio_charger->dev = dev;
 
-	/*
-	 * This will fetch a GPIO descriptor from device tree, ACPI or
-	 * boardfile descriptor tables. It's good to try this first.
-	 */
 	gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
-
-	/*
-	 * Fallback to legacy platform data method, if no GPIO is specified
-	 * using boardfile descriptor tables.
-	 */
-	if (!gpio_charger->gpiod && pdata) {
-		/* Non-DT: use legacy GPIO numbers */
-		if (!gpio_is_valid(pdata->gpio)) {
-			dev_err(dev, "Invalid gpio pin in pdata\n");
-			return -EINVAL;
-		}
-		flags = GPIOF_IN;
-		if (pdata->gpio_active_low)
-			flags |= GPIOF_ACTIVE_LOW;
-		ret = devm_gpio_request_one(dev, pdata->gpio, flags,
-					    dev_name(dev));
-		if (ret) {
-			dev_err(dev, "Failed to request gpio pin: %d\n", ret);
-			return ret;
-		}
-		/* Then convert this to gpiod for now */
-		gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
-	} else if (IS_ERR(gpio_charger->gpiod)) {
+	if (IS_ERR(gpio_charger->gpiod)) {
 		/* Just try again if this happens */
 		if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
 		dev_err(dev, "error getting GPIO descriptor\n");
 		return PTR_ERR(gpio_charger->gpiod);
 	}
-
 	if (gpio_charger->gpiod) {
 		gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
 		num_props++;
diff --git a/include/linux/power/gpio-charger.h b/include/linux/power/gpio-charger.h
index 5a5a8de98181..3081391e93c9 100644
--- a/include/linux/power/gpio-charger.h
+++ b/include/linux/power/gpio-charger.h
@@ -13,8 +13,6 @@
  * struct gpio_charger_platform_data - platform_data for gpio_charger devices
  * @name:		Name for the chargers power_supply device
  * @type:		Type of the charger
- * @gpio:		GPIO which is used to indicate the chargers status
- * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
  * @supplied_to:	Array of battery names to which this chargers supplies power
  * @num_supplicants:	Number of entries in the supplied_to array
  */
@@ -22,9 +20,6 @@ struct gpio_charger_platform_data {
 	const char *name;
 	enum power_supply_type type;
 
-	int gpio;
-	int gpio_active_low;
-
 	char **supplied_to;
 	size_t num_supplicants;
 };
-- 
2.26.2


  parent reply	other threads:[~2020-06-05 22:44 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-05 22:43 [PATCHv2 0/6] misc. gpio-charger patches Sebastian Reichel
2020-06-05 22:43 ` [PATCHv2 1/6] dt-bindings: power: supply: gpio-charger: convert to yaml Sebastian Reichel
2020-06-10  9:41   ` Linus Walleij
2020-06-15 17:49   ` Rob Herring
2020-06-19 16:29   ` Sebastian Reichel
2020-06-05 22:43 ` [PATCHv2 2/6] power: supply: gpio-charger: Make gpios optional Sebastian Reichel
2020-06-10  9:44   ` Linus Walleij
2020-06-15 17:50   ` Rob Herring
2020-06-19 16:29   ` Sebastian Reichel
2020-06-05 22:44 ` [PATCHv2 3/6] power: supply: gpio-charger: add charge-current-limit feature Sebastian Reichel
2020-06-10  9:46   ` Linus Walleij
2020-06-15 17:58   ` Rob Herring
2020-06-19 16:28     ` Sebastian Reichel
2020-06-05 22:44 ` [PATCHv2 4/6] ARM: pxa: Use GPIO descriptor for gpio-charger Sebastian Reichel
2020-06-10  9:52   ` Linus Walleij
2020-06-05 22:44 ` [PATCHv2 5/6] ARM: sa1100: " Sebastian Reichel
2020-06-10  9:54   ` Linus Walleij
2020-06-05 22:44 ` Sebastian Reichel [this message]
2020-06-10  9:55   ` [PATCHv2 6/6] power: supply: gpio-charger: drop legacy GPIO support Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200605224403.181015-7-sebastian.reichel@collabora.com \
    --to=sebastian.reichel@collabora.com \
    --cc=daniel@zonque.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.velikov@collabora.com \
    --cc=haojian.zhuang@gmail.com \
    --cc=kernel@collabora.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=robert.jarzmik@free.fr \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).