[v4,3/5] configs: Enable support for reset controllers on RPi4
diff mbox series

Message ID 20200612164632.25648-4-nsaenzjulienne@suse.de
State New, archived
Headers show
Series
  • usb: xhci: Load Raspberry Pi 4 VL805's firmware
Related show

Commit Message

Nicolas Saenz Julienne June 12, 2020, 4:46 p.m. UTC
This is required in order to access the reset controller used to
initialize the board's xHCI chip.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 configs/rpi_4_32b_defconfig | 1 +
 configs/rpi_4_defconfig     | 1 +
 configs/rpi_arm64_defconfig | 1 +
 3 files changed, 3 insertions(+)

Patch
diff mbox series

diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig
index b0797373b5..00c8d963ab 100644
--- a/configs/rpi_4_32b_defconfig
+++ b/configs/rpi_4_32b_defconfig
@@ -35,6 +35,7 @@  CONFIG_DM_PCI=y
 CONFIG_PCI_BRCMSTB=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
+CONFIG_DM_RESET=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig
index 932b768164..c73eccb61c 100644
--- a/configs/rpi_4_defconfig
+++ b/configs/rpi_4_defconfig
@@ -35,6 +35,7 @@  CONFIG_DM_PCI=y
 CONFIG_PCI_BRCMSTB=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
+CONFIG_DM_RESET=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig
index 855afcf1cf..800b51e6f5 100644
--- a/configs/rpi_arm64_defconfig
+++ b/configs/rpi_arm64_defconfig
@@ -32,6 +32,7 @@  CONFIG_DM_PCI=y
 CONFIG_PCI_BRCMSTB=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
+CONFIG_DM_RESET=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_DM_USB=y