linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: "Konrad Dybcio" <konradybcio@gmail.com>,
	"Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Jassi Brar" <jassisinghbrar@gmail.com>,
	"Kees Cook" <keescook@chromium.org>,
	"Anton Vorontsov" <anton@enomsg.org>,
	"Colin Cross" <ccross@android.com>,
	"Tony Luck" <tony.luck@intel.com>,
	"Sivaprakash Murugesan" <sivaprak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	"Łukasz Patron" <priv.luk@gmail.com>
Subject: [PATCH v3 5/7] arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform)
Date: Mon, 22 Jun 2020 21:25:55 +0200	[thread overview]
Message-ID: <20200622192558.152828-6-konradybcio@gmail.com> (raw)
In-Reply-To: <20200622192558.152828-1-konradybcio@gmail.com>

Add device tree support for the Sony Xperia XA2, XA2 Plus and
XA2 Ultra smartphones. They are all based on the Sony Nile
platform (sdm630) and share a lot of common code. The
differences are really minor, so a Nile-common DTSI
has been created to reduce clutter.

XA2 - Pioneer
XA2 Plus - Voyager
XA2 Ultra - Discovery

The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Tested-by: Łukasz Patron <priv.luk@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   3 +
 .../sdm630-sony-xperia-nile-discovery.dts     |  13 ++
 .../qcom/sdm630-sony-xperia-nile-pioneer.dts  |  13 ++
 .../qcom/sdm630-sony-xperia-nile-voyager.dts  |  20 +++
 .../dts/qcom/sdm630-sony-xperia-nile.dtsi     | 136 ++++++++++++++++++
 5 files changed, 185 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0f2c33d611df..1cad7cb07574 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -16,6 +16,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
new file mode 100644
index 000000000000..8fca0b69fa01
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Ultra";
+	compatible = "sony,discovery-row", "qcom,sdm630";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
new file mode 100644
index 000000000000..90dcd4ebaaed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2";
+	compatible = "sony,pioneer-row", "qcom,sdm630";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
new file mode 100644
index 000000000000..fae5f1bb6834
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Plus";
+	compatible = "sony,voyager-row", "qcom,sdm630";
+
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
+			height = <2160>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
new file mode 100644
index 000000000000..9ba359c848d0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <318 0>;
+	qcom,board-id = <8 1>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
+
+	/* This part enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			status= "okay";
+		};
+	};
+
+	gpio_keys {
+		status = "okay";
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		camera_focus {
+			label = "Camera Focus";
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+
+		camera_snapshot {
+			label = "Camera Snapshot";
+			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		vol_down {
+			label = "Volume Down";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			status = "okay";
+		};
+
+		debug_region@ffb00000 {
+			reg = <0x00 0xffb00000 0x00 0x100000>;
+			no-map;
+		};
+
+		removed_region@85800000 {
+			reg = <0x00 0x85800000 0x00 0x3700000>;
+			no-map;
+		};
+	};
+
+	soc {
+		sdhci@c0c4000 {
+			status = "okay";
+
+			mmc-ddr-1_8v;
+			/* SoMC Nile platform's eMMC doesn't support HS200 mode */
+			mmc-hs400-1_8v;
+		};
+
+		i2c@c175000 {
+			status = "okay";
+
+			/* Synaptics touchscreen */
+		};
+
+		i2c@c176000 {
+			status = "okay";
+
+			/* SMB1351 charger */
+		};
+
+		serial@c1af000 {
+			status = "okay";
+		};
+
+		/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+		i2c@c1b6000 {
+			status = "okay";
+
+			/* NXP NFC */
+		};
+	};
+};
-- 
2.27.0


  parent reply	other threads:[~2020-06-22 19:26 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-22 19:25 [PATCH v3 0/7] Add support for Sony SDM630-based boards Konrad Dybcio
2020-06-22 19:25 ` [PATCH v3 1/7] pinctrl: qcom: spmi-gpio: Add pm660(l) compatibility Konrad Dybcio
2020-06-23  7:26   ` Bjorn Andersson
2020-06-23  8:02     ` Konrad Dybcio
2020-06-23  8:25       ` Bjorn Andersson
2020-07-07 12:02   ` Linus Walleij
2020-06-22 19:25 ` [PATCH v3 2/7] Documentation: Document pm660(l) SPMI GPIOs compatible Konrad Dybcio
2020-06-23  7:26   ` Bjorn Andersson
2020-07-07 12:02   ` Linus Walleij
2020-06-22 19:25 ` [PATCH v3 3/7] arm64: dts: qcom: pm660(l): Add base dts files Konrad Dybcio
2020-06-22 19:25 ` [PATCH v3 4/7] arm64: dts: qcom: sdm630: Add sdm630 dts file Konrad Dybcio
2020-06-22 19:25 ` Konrad Dybcio [this message]
2020-06-23  7:35   ` [PATCH v3 5/7] arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) Bjorn Andersson
2020-06-23  8:08     ` Konrad Dybcio
2020-06-23  8:24       ` Bjorn Andersson
2020-06-22 19:25 ` [PATCH v3 6/7] arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform) Konrad Dybcio
2020-06-22 19:25 ` [PATCH v3 7/7] mailbox: qcom: Add sdm660 hmss compatible Konrad Dybcio
2020-06-23  7:25   ` Bjorn Andersson
2020-06-26 15:48     ` Alexey Minnekhanov
2020-07-13 19:19       ` Bjorn Andersson
2020-07-13 18:56   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200622192558.152828-6-konradybcio@gmail.com \
    --to=konradybcio@gmail.com \
    --cc=agross@kernel.org \
    --cc=anton@enomsg.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=ccross@android.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=keescook@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=priv.luk@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sivaprak@codeaurora.org \
    --cc=skrzynka@konradybcio.pl \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).