[PATCH v2 18/29] nvmem: Add Realtek DHC eFuse driver

From: "Andreas Färber" <afaerber@suse.de>
To: linux-realtek-soc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	"James Tai [戴志峰]" <james.tai@realtek.com>,
	"Stanley Chang [昌育德]" <stanley_chang@realtek.com>,
	"Edgar Lee" <cylee12@realtek.com>,
	"Andreas Färber" <afaerber@suse.de>,
	"Srinivas Kandagatla" <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 18/29] nvmem: Add Realtek DHC eFuse driver
Date: Tue, 23 Jun 2020 04:50:55 +0200	[thread overview]
Message-ID: <20200623025106.31273-19-afaerber@suse.de> (raw)
In-Reply-To: <20200623025106.31273-1-afaerber@suse.de>

Implement enough of a read-only nvmem driver to easily read efuse cells.

Cc: Cheng-Yu Lee <cylee12@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 v2: New
 
 MAINTAINERS                   |  1 +
 drivers/nvmem/Kconfig         |  9 ++++
 drivers/nvmem/Makefile        |  2 +
 drivers/nvmem/rtk-dhc-efuse.c | 86 +++++++++++++++++++++++++++++++++++
 4 files changed, 98 insertions(+)
 create mode 100644 drivers/nvmem/rtk-dhc-efuse.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 1d0d6ab20451..02117fbf0e57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2312,6 +2312,7 @@ F:	Documentation/devicetree/bindings/soc/realtek/
 F:	arch/arm/boot/dts/rtd*
 F:	arch/arm/mach-realtek/
 F:	arch/arm64/boot/dts/realtek/
+F:	drivers/nvmem/rtk-dhc-efuse.c
 F:	drivers/soc/realtek/
 
 ARM/RENESAS ARM64 ARCHITECTURE
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index d7b7f6d688e7..75cf43b16cf9 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -129,6 +129,15 @@ config NVMEM_SPMI_SDAM
 	  Qualcomm Technologies, Inc. PMICs. It provides the clients
 	  an interface to read/write to the SDAM module's shared memory.
 
+config REALTEK_DHC_EFUSE
+	tristate "Realtek DHC eFuse Support"
+	depends on ARCH_REALTEK || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say y here to enable read-only access to the Realtek Digital Home
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-rtk-dhc-efuse.
+
 config ROCKCHIP_EFUSE
 	tristate "Rockchip eFuse Support"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index a7c377218341..67cefdfa44e6 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -33,6 +33,8 @@ obj-$(CONFIG_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
 nvmem_rockchip_efuse-y		:= rockchip-efuse.o
 obj-$(CONFIG_ROCKCHIP_OTP)	+= nvmem-rockchip-otp.o
 nvmem-rockchip-otp-y		:= rockchip-otp.o
+obj-$(CONFIG_REALTEK_DHC_EFUSE)	+= nvmem-rtk-dhc-efuse.o
+nvmem-rtk-dhc-efuse-y		:= rtk-dhc-efuse.o
 obj-$(CONFIG_NVMEM_SUNXI_SID)	+= nvmem_sunxi_sid.o
 nvmem_stm32_romem-y 		:= stm32-romem.o
 obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
diff --git a/drivers/nvmem/rtk-dhc-efuse.c b/drivers/nvmem/rtk-dhc-efuse.c
new file mode 100644
index 000000000000..4672db2c2619
--- /dev/null
+++ b/drivers/nvmem/rtk-dhc-efuse.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Realtek Digital Home Center eFuse
+ *
+ * Copyright (c) 2020 Andreas Färber
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct dhc_efuse {
+	struct device *dev;
+	void __iomem *base;
+	struct nvmem_device *nvmem;
+};
+
+static int dhc_efuse_reg_read(void *priv, unsigned int offset, void *val,
+	size_t bytes)
+{
+	struct dhc_efuse *efuse = priv;
+	u8 *buf = val;
+
+	while (bytes--)
+		*buf++ = readb_relaxed(efuse->base + offset++);
+
+	return 0;
+}
+
+static int dhc_efuse_probe(struct platform_device *pdev)
+{
+	struct dhc_efuse *efuse;
+	struct nvmem_config config = {};
+	struct resource *res;
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	efuse->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	efuse->dev = &pdev->dev;
+
+	config.dev = &pdev->dev;
+	config.name = "dhc-efuse";
+	config.owner = THIS_MODULE;
+	config.type = NVMEM_TYPE_OTP;
+	config.read_only = true,
+	config.word_size = 4;
+	config.stride = 1;
+	config.size = resource_size(res);
+	config.reg_read = dhc_efuse_reg_read;
+	config.priv = efuse;
+
+	efuse->nvmem = devm_nvmem_register(&pdev->dev, &config);
+	if (IS_ERR(efuse->nvmem)) {
+		dev_err(&pdev->dev, "failed to register nvmem (%ld)\n",
+			PTR_ERR(efuse->nvmem));
+		return PTR_ERR(efuse->nvmem);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id dhc_efuse_dt_ids[] = {
+	 { .compatible = "realtek,rtd1195-efuse" },
+	 { }
+};
+
+static struct platform_driver dhc_efuse_driver = {
+	.probe = dhc_efuse_probe,
+	.driver = {
+		.name = "rtk-dhc-efuse",
+		.of_match_table	= dhc_efuse_dt_ids,
+	},
+};
+module_platform_driver(dhc_efuse_driver);
+
+MODULE_DESCRIPTION("Realtek DHC eFuse driver");
+MODULE_LICENSE("GPL");
-- 
2.26.2

