From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: Konrad Dybcio <konradybcio@gmail.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Kees Cook <keescook@chromium.org>,
Anton Vorontsov <anton@enomsg.org>,
Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 12/12] arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
Date: Wed, 24 Jun 2020 00:48:11 +0200 [thread overview]
Message-ID: <20200623224813.297077-13-konradybcio@gmail.com> (raw)
In-Reply-To: <20200623224813.297077-1-konradybcio@gmail.com>
Add device tree support for the Sony Xperia Z5 smartphone.
The kitakami part in DT name comes from Sony platform naming
and is there to indicate that as more Sony devices using msm8994
are added to the kernel, they will share a lot of common code.
The board currently supports
* Serial
* SDHCI
* I2C
* Regulator configuration
* pstore log dump
* GPIO keys
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../msm8994-sony-xperia-kitakami-sumire.dts | 395 ++++++++++++++++++
2 files changed, 396 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0f2c33d611df..01ca9ac9f905 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
new file mode 100644
index 000000000000..e70d54ed7325
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+ model = "Sony Xperia Z5";
+ compatible = "somc,sumire-row", "qcom,msm8994";
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <0xcf 0x20001>;
+ qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+ qcom,board-id = <8 0>;
+
+ /* Xperia Z5's firmware doesn't support PSCI */
+ /delete-node/ psci;
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@0 {
+ label = "Volume Down";
+ gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@1 {
+ label = "Volume Up";
+ gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@2 {
+ label = "Camera Snapshot";
+ gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@3 {
+ label = "Camera Focus";
+ gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* This is for getting crash logs using Android downstream kernels */
+ ramoops@1fe00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x1fe00000 0x0 0x200000>;
+ console-size = <0x100000>;
+ record-size = <0x10000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x80000>;
+ };
+
+ continuous_splash: framebuffer@3401000{
+ reg = <0x0 0x3401000 0x0 0x2200000>;
+ no-map;
+ };
+
+ dfps_data_mem: dfps_data_mem@3400000 {
+ reg = <0x0 0x3400000 0x0 0x1000>;
+ no-map;
+ };
+
+ peripheral_region: peripheral_region@7400000 {
+ reg = <0x0 0x7400000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ modem_region: modem_region@9000000 {
+ reg = <0x0 0x9000000 0x0 0x5a00000>;
+ no-map;
+ };
+
+ tzapp: modem_region@ea00000 {
+ reg = <0x0 0xea00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ fb_region: fb_region@40000000 {
+ reg = <0x00 0x40000000 0x00 0x1000000>;
+ no-map;
+ };
+ };
+};
+
+&blsp_spi0 {
+ status = "okay";
+
+ /* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp_i2c2 {
+ status = "okay";
+
+ /* NXP NFC */
+};
+
+&blsp_i2c4 {
+ status = "okay";
+
+ /* Empty but active */
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ /* SMB1357 charger and sii8620 HDMI/MHL bridge */
+};
+
+&blsp_i2c6 {
+ status = "okay";
+
+ /* Synaptics touchscreen */
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_uart2 {
+ status = "okay";
+};
+
+&pm8994_regulators {
+ s1 {
+ /* Unused */
+ status = "disabled";
+ };
+
+ s2 {
+ /* Unused */
+ status = "disabled";
+ };
+
+ s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ /* Unused */
+ status = "disabled";
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ /* Unused */
+ status = "disabled";
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ l25 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l26 {
+ regulator-min-microvolt = <987500>;
+ regulator-max-microvolt = <987500>;
+ };
+
+ l27 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l29 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l30 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l31 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ };
+
+ l32 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ lvs1 {
+ /* Downstream sets it to enabled but
+ doesn't specify a voltage range */
+ status = "okay";
+ };
+
+ lvs2 {
+ /* Downstream sets it to enabled but
+ doesn't specify a voltage range */
+ status = "okay";
+ };
+};
+
+&pmi8994_regulators {
+ s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ s2 {
+ /* Unused */
+ status = "disabled";
+ };
+
+ boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
+};
+
+&sdhc1 {
+ status = "okay";
+
+ /* Downstream pushes 2.95V to the sdhci device,
+ * but upstream driver REALLY wants to make vmmc 1.8v
+ * cause of the hs400-1_8v mode. MMC works fine without
+ * that regulator, so let's not use it for now.
+ * vqmmc is also disabled cause driver stll complains.
+ *
+ * vmmc-supply = <&pm8994_l20>;
+ * vqmmc-supply = <&pm8994_s4>;
+ */
+};
--
2.27.0
next prev parent reply other threads:[~2020-06-23 22:49 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-23 22:47 [PATCH v2 00/12] MSM8994 peripheral enablement, DTS updates Konrad Dybcio
2020-06-23 22:48 ` [PATCH v2 01/12] arm64: dts: qcom: msm8994: Modernize the DTS style Konrad Dybcio
2020-06-23 23:04 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 02/12] arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device Konrad Dybcio
2020-06-23 23:15 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 03/12] arm64: dts: qcom: msm8994: Add a proper CPU map Konrad Dybcio
2020-06-23 23:16 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 04/12] arm64: dts: qcom: msm8994: Add support for SMD RPM Konrad Dybcio
2020-06-23 23:15 ` Bjorn Andersson
2020-06-23 23:34 ` Konrad Dybcio
2020-06-24 6:40 ` Bjorn Andersson
2020-06-24 15:03 ` Konrad Dybcio
2020-06-23 22:48 ` [PATCH v2 05/12] arm64: dts: qcom: msm8994: Add SDHCI1 node Konrad Dybcio
2020-06-23 23:17 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 06/12] arm64: dts: qcom: msm8994: Add SCM node Konrad Dybcio
2020-06-23 23:19 ` Bjorn Andersson
2020-06-23 23:30 ` Konrad Dybcio
2020-06-24 7:29 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 07/12] arm64: dts: qcom: msm8994: Add I2C, SPI and BLSP DMA nodes Konrad Dybcio
2020-06-23 23:21 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 08/12] arm64: dts: qcom: msm8994: Add pmu node Konrad Dybcio
2020-06-23 23:22 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 09/12] arm64: dts: qcom: msm8994: Add PSCI node Konrad Dybcio
2020-06-23 23:22 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 10/12] arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id Konrad Dybcio
2020-06-23 23:23 ` Bjorn Andersson
2020-06-23 22:48 ` [PATCH v2 11/12] arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead Konrad Dybcio
2020-06-23 23:24 ` Bjorn Andersson
2020-06-23 22:48 ` Konrad Dybcio [this message]
2020-06-23 23:27 ` [PATCH v2 12/12] arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) Bjorn Andersson
2020-06-24 14:44 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200623224813.297077-13-konradybcio@gmail.com \
--to=konradybcio@gmail.com \
--cc=agross@kernel.org \
--cc=anton@enomsg.org \
--cc=bjorn.andersson@linaro.org \
--cc=ccross@android.com \
--cc=devicetree@vger.kernel.org \
--cc=keescook@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=skrzynka@konradybcio.pl \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).