linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: jic23@kernel.org
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
	heiko@sntech.de, linux-iio@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	xxm@rock-chips.com,
	Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Subject: [PATCH v6 1/3] iio: adc: rockchip_saradc: move all of probe to devm-functions
Date: Wed, 24 Jun 2020 01:30:09 +0200	[thread overview]
Message-ID: <20200623233011.2319035-1-heiko@sntech.de> (raw)

From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

Parts of the saradc probe rely on devm functions and later parts do not.
This makes it more difficult to for example enable triggers via their
devm-functions and would need more undo-work in remove.

So to make life easier for the driver, move the rest of probe calls
also to their devm-equivalents.

This includes moving the clk- and regulator-disabling to a devm_action
so that they gets disabled both during remove and in the error case
in probe, after the action is registered.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
changes in v6:
- move devm actions into separate functions as suggested by Jonathan
changes in v5:
- none
changes in v4:
- new patch as suggested by Jonathan

 drivers/iio/adc/rockchip_saradc.c | 72 ++++++++++++++++++++-----------
 1 file changed, 46 insertions(+), 26 deletions(-)

diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index 582ba047c4a6..1a7990d60f9f 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -193,6 +193,27 @@ static void rockchip_saradc_reset_controller(struct reset_control *reset)
 	reset_control_deassert(reset);
 }
 
+static void rockchip_saradc_clk_disable(void *data)
+{
+	struct rockchip_saradc *info = data;
+
+	clk_disable_unprepare(info->clk);
+}
+
+static void rockchip_saradc_pclk_disable(void *data)
+{
+	struct rockchip_saradc *info = data;
+
+	clk_disable_unprepare(info->pclk);
+}
+
+static void rockchip_saradc_regulator_disable(void *data)
+{
+	struct rockchip_saradc *info = data;
+
+	regulator_disable(info->vref);
+}
+
 static int rockchip_saradc_probe(struct platform_device *pdev)
 {
 	struct rockchip_saradc *info = NULL;
@@ -291,17 +312,38 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to enable vref regulator\n");
 		return ret;
 	}
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       rockchip_saradc_regulator_disable, info);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register devm action, %d\n",
+			ret);
+		return ret;
+	}
 
 	ret = clk_prepare_enable(info->pclk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to enable pclk\n");
-		goto err_reg_voltage;
+		return ret;
+	}
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       rockchip_saradc_pclk_disable, info);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register devm action, %d\n",
+			ret);
+		return ret;
 	}
 
 	ret = clk_prepare_enable(info->clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to enable converter clock\n");
-		goto err_pclk;
+		return ret;
+	}
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       rockchip_saradc_clk_disable, info);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register devm action, %d\n",
+			ret);
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, indio_dev);
@@ -315,30 +357,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	indio_dev->channels = info->data->channels;
 	indio_dev->num_channels = info->data->num_channels;
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_iio_device_register(&pdev->dev, indio_dev);
 	if (ret)
-		goto err_clk;
-
-	return 0;
-
-err_clk:
-	clk_disable_unprepare(info->clk);
-err_pclk:
-	clk_disable_unprepare(info->pclk);
-err_reg_voltage:
-	regulator_disable(info->vref);
-	return ret;
-}
-
-static int rockchip_saradc_remove(struct platform_device *pdev)
-{
-	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
-	struct rockchip_saradc *info = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	clk_disable_unprepare(info->clk);
-	clk_disable_unprepare(info->pclk);
-	regulator_disable(info->vref);
+		return ret;
 
 	return 0;
 }
@@ -383,7 +404,6 @@ static SIMPLE_DEV_PM_OPS(rockchip_saradc_pm_ops,
 
 static struct platform_driver rockchip_saradc_driver = {
 	.probe		= rockchip_saradc_probe,
-	.remove		= rockchip_saradc_remove,
 	.driver		= {
 		.name	= "rockchip-saradc",
 		.of_match_table = rockchip_saradc_match,
-- 
2.26.2


             reply	other threads:[~2020-06-23 23:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 23:30 Heiko Stuebner [this message]
2020-06-23 23:30 ` [PATCH v6 2/3] iio: adc: rockchip_saradc: better prefix for channel constant Heiko Stuebner
2020-06-27 12:04   ` Jonathan Cameron
2020-06-23 23:30 ` [PATCH v6 3/3] iio: adc: rockchip_saradc: Add support iio buffers Heiko Stuebner
2020-06-27 12:10   ` Jonathan Cameron
2020-06-27 12:03 ` [PATCH v6 1/3] iio: adc: rockchip_saradc: move all of probe to devm-functions Jonathan Cameron
2020-07-03  7:48   ` Heiko Stuebner
2020-07-04 15:38     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200623233011.2319035-1-heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=heiko.stuebner@theobroma-systems.com \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=pmeerw@pmeerw.net \
    --cc=xxm@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).