From: Anson Huang <Anson.Huang@nxp.com>
To: catalin.marinas@arm.com, will@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, bjorn.andersson@linaro.org,
leoyang.li@nxp.com, vkoul@kernel.org, geert+renesas@glider.be,
olof@lixom.net, leonard.crestez@nxp.com, aisheng.dong@nxp.com,
peng.fan@nxp.com, franck.lenormand@nxp.com, arnd@arndb.de,
krzk@kernel.org, daniel.baluta@nxp.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver
Date: Wed, 24 Jun 2020 20:11:27 +0800 [thread overview]
Message-ID: <1593000687-12213-1-git-send-email-Anson.Huang@nxp.com> (raw)
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/configs/defconfig | 1 -
drivers/firmware/imx/imx-scu.c | 127 ++++++++++++++++++++++++++++++
drivers/soc/imx/Kconfig | 9 ---
drivers/soc/imx/Makefile | 1 -
drivers/soc/imx/soc-imx-scu.c | 172 -----------------------------------------
5 files changed, 127 insertions(+), 183 deletions(-)
delete mode 100644 drivers/soc/imx/soc-imx-scu.c
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index ae76fae..35f037f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -854,7 +854,6 @@ CONFIG_OWL_PM_DOMAINS=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_FSL_DPAA=y
CONFIG_FSL_MC_DPIO=y
-CONFIG_IMX_SCU_SOC=y
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_RMTFS_MEM=m
diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
index 2ab0482..2719487 100644
--- a/drivers/firmware/imx/imx-scu.c
+++ b/drivers/firmware/imx/imx-scu.c
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/firmware/imx/rsrc.h>
#include <linux/err.h>
#include <linux/firmware/imx/ipc.h>
#include <linux/firmware/imx/sci.h>
@@ -18,6 +19,7 @@
#include <linux/mutex.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/sys_soc.h>
#define SCU_MU_CHAN_NUM 8
#define MAX_RX_TIMEOUT (msecs_to_jiffies(30))
@@ -45,6 +47,25 @@ struct imx_sc_ipc {
u8 count;
};
+struct imx_sc_msg_misc_get_soc_id {
+ struct imx_sc_rpc_msg hdr;
+ union {
+ struct {
+ u32 control;
+ u16 resource;
+ } __packed req;
+ struct {
+ u32 id;
+ } resp;
+ } data;
+} __packed __aligned(4);
+
+struct imx_sc_msg_misc_get_soc_uid {
+ struct imx_sc_rpc_msg hdr;
+ u32 uid_low;
+ u32 uid_high;
+} __packed;
+
/*
* This type is used to indicate error response for most functions.
*/
@@ -257,6 +278,108 @@ int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
}
EXPORT_SYMBOL(imx_scu_call_rpc);
+static int imx_scu_soc_uid(u64 *soc_uid)
+{
+ struct imx_sc_msg_misc_get_soc_uid msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
+ hdr->size = 1;
+
+ ret = imx_scu_call_rpc(imx_sc_ipc_handle, &msg, true);
+ if (ret) {
+ pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
+ return ret;
+ }
+
+ *soc_uid = msg.uid_high;
+ *soc_uid <<= 32;
+ *soc_uid |= msg.uid_low;
+
+ return 0;
+}
+
+static int imx_scu_soc_id(void)
+{
+ struct imx_sc_msg_misc_get_soc_id msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
+ hdr->size = 3;
+
+ msg.data.req.control = IMX_SC_C_ID;
+ msg.data.req.resource = IMX_SC_R_SYSTEM;
+
+ ret = imx_scu_call_rpc(imx_sc_ipc_handle, &msg, true);
+ if (ret) {
+ pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
+ return ret;
+ }
+
+ return msg.data.resp.id;
+}
+
+static int imx_scu_soc_init(struct device *dev)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ int id, ret;
+ u64 uid = 0;
+ u32 val;
+
+ soc_dev_attr = devm_kzalloc(dev, sizeof(*soc_dev_attr),
+ GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Freescale i.MX";
+
+ ret = of_property_read_string(of_root,
+ "model",
+ &soc_dev_attr->machine);
+ if (ret)
+ return ret;
+
+ id = imx_scu_soc_id();
+ if (id < 0)
+ return -EINVAL;
+
+ ret = imx_scu_soc_uid(&uid);
+ if (ret < 0)
+ return -EINVAL;
+
+ /* format soc_id value passed from SCU firmware */
+ val = id & 0x1f;
+ soc_dev_attr->soc_id = devm_kasprintf(dev, GFP_KERNEL, "0x%x", val);
+ if (!soc_dev_attr->soc_id)
+ return -ENOMEM;
+
+ /* format revision value passed from SCU firmware */
+ val = (id >> 5) & 0xf;
+ val = (((val >> 2) + 1) << 4) | (val & 0x3);
+ soc_dev_attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
+ (val >> 4) & 0xf, val & 0xf);
+ if (!soc_dev_attr->revision)
+ return -ENOMEM;
+
+ soc_dev_attr->serial_number = devm_kasprintf(dev, GFP_KERNEL,
+ "%016llX", uid);
+ if (!soc_dev_attr->serial_number)
+ return -ENOMEM;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev))
+ return PTR_ERR(soc_dev);
+
+ return 0;
+}
+
static int imx_scu_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -328,6 +451,10 @@ static int imx_scu_probe(struct platform_device *pdev)
imx_sc_ipc_handle = sc_ipc;
+ ret = imx_scu_soc_init(dev);
+ if (ret)
+ dev_warn(dev, "failed to initialize SoC info: %d\n", ret);
+
ret = imx_scu_enable_general_irq_channel(dev);
if (ret)
dev_warn(dev,
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index d515d2c..d49fa63 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -8,15 +8,6 @@ config IMX_GPCV2_PM_DOMAINS
select PM_GENERIC_DOMAINS
default y if SOC_IMX7D
-config IMX_SCU_SOC
- bool "i.MX System Controller Unit SoC info support"
- depends on IMX_SCU
- select SOC_BUS
- help
- If you say yes here you get support for the NXP i.MX System
- Controller Unit SoC info module, it will provide the SoC info
- like SoC family, ID and revision etc.
-
config SOC_IMX8M
bool "i.MX8M SoC family support"
depends on ARCH_MXC || COMPILE_TEST
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index 4461432..078dc91 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -5,4 +5,3 @@ endif
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
-obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o
diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c
deleted file mode 100644
index 92448ca..0000000
--- a/drivers/soc/imx/soc-imx-scu.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 NXP.
- */
-
-#include <dt-bindings/firmware/imx/rsrc.h>
-#include <linux/firmware/imx/sci.h>
-#include <linux/slab.h>
-#include <linux/sys_soc.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#define IMX_SCU_SOC_DRIVER_NAME "imx-scu-soc"
-
-static struct imx_sc_ipc *soc_ipc_handle;
-
-struct imx_sc_msg_misc_get_soc_id {
- struct imx_sc_rpc_msg hdr;
- union {
- struct {
- u32 control;
- u16 resource;
- } __packed req;
- struct {
- u32 id;
- } resp;
- } data;
-} __packed __aligned(4);
-
-struct imx_sc_msg_misc_get_soc_uid {
- struct imx_sc_rpc_msg hdr;
- u32 uid_low;
- u32 uid_high;
-} __packed;
-
-static int imx_scu_soc_uid(u64 *soc_uid)
-{
- struct imx_sc_msg_misc_get_soc_uid msg;
- struct imx_sc_rpc_msg *hdr = &msg.hdr;
- int ret;
-
- hdr->ver = IMX_SC_RPC_VERSION;
- hdr->svc = IMX_SC_RPC_SVC_MISC;
- hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
- hdr->size = 1;
-
- ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
- if (ret) {
- pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
- return ret;
- }
-
- *soc_uid = msg.uid_high;
- *soc_uid <<= 32;
- *soc_uid |= msg.uid_low;
-
- return 0;
-}
-
-static int imx_scu_soc_id(void)
-{
- struct imx_sc_msg_misc_get_soc_id msg;
- struct imx_sc_rpc_msg *hdr = &msg.hdr;
- int ret;
-
- hdr->ver = IMX_SC_RPC_VERSION;
- hdr->svc = IMX_SC_RPC_SVC_MISC;
- hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
- hdr->size = 3;
-
- msg.data.req.control = IMX_SC_C_ID;
- msg.data.req.resource = IMX_SC_R_SYSTEM;
-
- ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
- if (ret) {
- pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
- return ret;
- }
-
- return msg.data.resp.id;
-}
-
-static int imx_scu_soc_probe(struct platform_device *pdev)
-{
- struct soc_device_attribute *soc_dev_attr;
- struct soc_device *soc_dev;
- int id, ret;
- u64 uid = 0;
- u32 val;
-
- ret = imx_scu_get_handle(&soc_ipc_handle);
- if (ret)
- return ret;
-
- soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
- GFP_KERNEL);
- if (!soc_dev_attr)
- return -ENOMEM;
-
- soc_dev_attr->family = "Freescale i.MX";
-
- ret = of_property_read_string(of_root,
- "model",
- &soc_dev_attr->machine);
- if (ret)
- return ret;
-
- id = imx_scu_soc_id();
- if (id < 0)
- return -EINVAL;
-
- ret = imx_scu_soc_uid(&uid);
- if (ret < 0)
- return -EINVAL;
-
- /* format soc_id value passed from SCU firmware */
- val = id & 0x1f;
- soc_dev_attr->soc_id = devm_kasprintf(&pdev->dev, GFP_KERNEL, "0x%x", val);
- if (!soc_dev_attr->soc_id)
- return -ENOMEM;
-
- /* format revision value passed from SCU firmware */
- val = (id >> 5) & 0xf;
- val = (((val >> 2) + 1) << 4) | (val & 0x3);
- soc_dev_attr->revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%d.%d",
- (val >> 4) & 0xf, val & 0xf);
- if (!soc_dev_attr->revision)
- return -ENOMEM;
-
- soc_dev_attr->serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL,
- "%016llX", uid);
- if (!soc_dev_attr->serial_number)
- return -ENOMEM;
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev))
- return PTR_ERR(soc_dev);
-
- return 0;
-}
-
-static struct platform_driver imx_scu_soc_driver = {
- .driver = {
- .name = IMX_SCU_SOC_DRIVER_NAME,
- },
- .probe = imx_scu_soc_probe,
-};
-
-static int __init imx_scu_soc_init(void)
-{
- struct platform_device *pdev;
- struct device_node *np;
- int ret;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
- if (!np)
- return -ENODEV;
-
- of_node_put(np);
-
- ret = platform_driver_register(&imx_scu_soc_driver);
- if (ret)
- return ret;
-
- pdev = platform_device_register_simple(IMX_SCU_SOC_DRIVER_NAME,
- -1, NULL, 0);
- if (IS_ERR(pdev))
- platform_driver_unregister(&imx_scu_soc_driver);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-device_initcall(imx_scu_soc_init);
--
2.7.4
next reply other threads:[~2020-06-24 12:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-24 12:11 Anson Huang [this message]
2020-06-24 12:33 ` [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver Franck Lenormand
2020-06-24 13:15 ` Anson Huang
2020-06-24 13:59 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1593000687-12213-1-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=arnd@arndb.de \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=daniel.baluta@nxp.com \
--cc=festevam@gmail.com \
--cc=franck.lenormand@nxp.com \
--cc=geert+renesas@glider.be \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=leonard.crestez@nxp.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).