linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: amirmizi6@gmail.com
To: Eyal.Cohen@nuvoton.com, jarkko.sakkinen@linux.intel.com,
	oshrialkoby85@gmail.com, alexander.steffen@infineon.com,
	robh+dt@kernel.org,
	"benoit.houyere@st.com--to=mark.rutland"@arm.com,
	peterhuewe@gmx.de, christophe-h.richard@st.com, jgg@ziepe.ca,
	arnd@arndb.de, gregkh@linuxfoundation.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-integrity@vger.kernel.org, oshri.alkoby@nuvoton.com,
	tmaimon77@gmail.com, gcwilson@us.ibm.com, kgoldman@us.ibm.com,
	Dan.Morav@nuvoton.com, oren.tanami@nuvoton.com,
	shmulik.hager@nuvoton.com, amir.mizinski@nuvoton.com,
	Amir Mizinski <amirmizi6@gmail.com>,
	Christophe Ricard <christophe-h.ricard@st.com>
Subject: [PATCH v12 3/9] tpm: tpm_tis: Add retry in case of protocol failure.
Date: Thu, 25 Jun 2020 17:46:43 +0300	[thread overview]
Message-ID: <20200625144650.269719-4-amirmizi6@gmail.com> (raw)
In-Reply-To: <20200625144650.269719-1-amirmizi6@gmail.com>

From: Amir Mizinski <amirmizi6@gmail.com>

Added a retry mechanism on any protocol error when sending a command or
receiving a response. This was changed to comply with
the TCG PC Client Device Driver Design Principles for TPM 2.0.

When sending a command, a loop is added in "tpm_tis_send_main()" that calls
"tpm_tis_send_data()" and then issues a retry attempt if any error occurs.
When receiving a response, the following new function derived from
"tpm_tis_recv()" is added: "__tpm_tis_recv()". "tpm_tis_recv()" is modified
to call "__tpm_tis_recv()" in a loop. If any error occurs, a retry is
initiated by setting TPM_STS.responseRetry and "__tpm_tis_recv()" is
called again.
In both cases a retry is attempted up to "TPM_RETRY" times.

Co-developed-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
---
 drivers/char/tpm/tpm_tis_core.c | 62 ++++++++++++++++++++++++++---------------
 drivers/char/tpm/tpm_tis_core.h |  1 +
 2 files changed, 41 insertions(+), 22 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 6b33620..e136467 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -305,29 +305,24 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
 	return size;
 }
 
-static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
+static int __tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
 	int size = 0;
 	int status;
 	u32 expected;
 
-	if (count < TPM_HEADER_SIZE) {
-		size = -EIO;
-		goto out;
-	}
-
 	size = recv_data(chip, buf, TPM_HEADER_SIZE);
 	/* read first 10 bytes, including tag, paramsize, and result */
 	if (size < TPM_HEADER_SIZE) {
 		dev_err(&chip->dev, "Unable to read header\n");
-		goto out;
+		return size;
 	}
 
 	expected = be32_to_cpu(*(__be32 *) (buf + 2));
 	if (expected > count || expected < TPM_HEADER_SIZE) {
 		size = -EIO;
-		goto out;
+		return size;
 	}
 
 	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
@@ -335,22 +330,45 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 	if (size < expected) {
 		dev_err(&chip->dev, "Unable to read remainder of result\n");
 		size = -ETIME;
-		goto out;
+		return size;
 	}
 
 	if (tpm_tis_wait_for_stat(chip, TPM_STS_VALID, TPM_STS_VALID,
 				  chip->timeout_c, &priv->int_queue,
 				  false) < 0) {
 		size = -ETIME;
-		goto out;
+		return size;
 	}
+
 	status = tpm_tis_status(chip);
 	if (status & TPM_STS_DATA_AVAIL) {	/* retry? */
 		dev_err(&chip->dev, "Error left over data\n");
 		size = -EIO;
+		return size;
+	}
+
+	return size;
+}
+
+static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+	int size;
+	int i;
+
+	if (count < TPM_HEADER_SIZE) {
+		size = -EIO;
 		goto out;
 	}
 
+	for (i = 0; i < TPM_RETRY; i++) {
+		size = __tpm_tis_recv(chip, buf, count);
+		if (size <= 0)
+			tpm_tis_write8(priv, TPM_STS(priv->locality),
+				       TPM_STS_RESPONSE_RETRY);
+		else
+			goto out;
+	}
 out:
 	tpm_tis_ready(chip);
 	return size;
@@ -375,7 +393,7 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
 					  chip->timeout_b, &priv->int_queue,
 					  false) < 0) {
 			rc = -ETIME;
-			goto out_err;
+			return rc;
 		}
 	}
 
@@ -384,13 +402,13 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
 		if (burstcnt < 0) {
 			dev_err(&chip->dev, "Unable to read burstcount\n");
 			rc = burstcnt;
-			goto out_err;
+			return rc;
 		}
 		burstcnt = min_t(int, burstcnt, len - count);
 		rc = tpm_tis_write_bytes(priv, TPM_DATA_FIFO(priv->locality),
 					 burstcnt, buf + count);
 		if (rc < 0)
-			goto out_err;
+			return rc;
 
 		count += burstcnt;
 	}
@@ -398,14 +416,10 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
 				  TPM_STS_VALID, chip->timeout_a,
 				  &priv->int_queue, false) < 0) {
 		rc = -ETIME;
-		goto out_err;
+		return rc;
 	}
 
 	return 0;
-
-out_err:
-	tpm_tis_ready(chip);
-	return rc;
 }
 
 static void disable_interrupts(struct tpm_chip *chip)
@@ -434,13 +448,17 @@ static void disable_interrupts(struct tpm_chip *chip)
 static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
 {
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
-	int rc;
+	int rc, i;
 	u32 ordinal;
 	unsigned long dur;
 
-	rc = tpm_tis_send_data(chip, buf, len);
-	if (rc < 0)
-		return rc;
+	for (i = 0; i < TPM_RETRY; i++) {
+		rc = tpm_tis_send_data(chip, buf, len);
+		if (rc >= 0)
+			break;
+	}
+	if (i == TPM_RETRY)
+		goto out_err;
 
 	/* go and do it */
 	rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index d06c65b..6cc6b76 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -34,6 +34,7 @@ enum tis_status {
 	TPM_STS_GO = 0x20,
 	TPM_STS_DATA_AVAIL = 0x10,
 	TPM_STS_DATA_EXPECT = 0x08,
+	TPM_STS_RESPONSE_RETRY = 0x02,
 };
 
 enum tis_int_flags {
-- 
2.7.4


  parent reply	other threads:[~2020-06-25 14:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-25 14:46 [PATCH v12 0/9] Add tpm i2c ptp driver amirmizi6
2020-06-25 14:46 ` [PATCH v12 1/9] tpm: Make read{16, 32}() and write32() in tpm_tis_phy_ops optional amirmizi6
2020-06-25 14:46 ` [PATCH v12 2/9] tpm: tpm_tis: Fix expected bit handling and send all bytes in one shot without last byte in exception amirmizi6
2020-06-25 14:46 ` amirmizi6 [this message]
2020-06-25 22:00   ` [PATCH v12 3/9] tpm: tpm_tis: Add retry in case of protocol failure Jarkko Sakkinen
2020-06-25 14:46 ` [PATCH v12 4/9] tpm: tpm_tis: Add verify_data_integrity handle to tpm_tis_phy_ops amirmizi6
2020-06-25 22:02   ` Jarkko Sakkinen
2020-06-25 14:46 ` [PATCH v12 5/9] tpm: tpm_tis: Rewrite "tpm_tis_req_canceled()" amirmizi6
2020-06-25 14:46 ` [PATCH v12 6/9] tpm: Handle an exception for TPM Firmware Update mode amirmizi6
2020-06-25 14:46 ` [PATCH v12 7/9] tpm: tpm_tis: verify TPM_STS register is valid after locality request amirmizi6
2020-06-25 14:46 ` [PATCH v12 8/9] tpm: Add YAML schema for TPM TIS I2C options amirmizi6
2020-06-25 14:46 ` [PATCH v12 9/9] tpm: tpm_tis: add tpm_tis_i2c driver amirmizi6

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200625144650.269719-4-amirmizi6@gmail.com \
    --to=amirmizi6@gmail.com \
    --cc="benoit.houyere@st.com--to=mark.rutland"@arm.com \
    --cc=Dan.Morav@nuvoton.com \
    --cc=Eyal.Cohen@nuvoton.com \
    --cc=alexander.steffen@infineon.com \
    --cc=amir.mizinski@nuvoton.com \
    --cc=arnd@arndb.de \
    --cc=christophe-h.ricard@st.com \
    --cc=christophe-h.richard@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gcwilson@us.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgg@ziepe.ca \
    --cc=kgoldman@us.ibm.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oren.tanami@nuvoton.com \
    --cc=oshri.alkoby@nuvoton.com \
    --cc=oshrialkoby85@gmail.com \
    --cc=peterhuewe@gmx.de \
    --cc=robh+dt@kernel.org \
    --cc=shmulik.hager@nuvoton.com \
    --cc=tmaimon77@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).