[PATCH v2 04/13] arm64: dts: qcom: bullhead: Move UART pinctrl to SoC

From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: Konrad Dybcio <konradybcio@gmail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Kees Cook <keescook@chromium.org>,
	Anton Vorontsov <anton@enomsg.org>,
	Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 04/13] arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
Date: Thu, 25 Jun 2020 20:12:52 +0200	[thread overview]
Message-ID: <20200625181303.129874-5-konradybcio@gmail.com> (raw)
In-Reply-To: <20200625181303.129874-1-konradybcio@gmail.com>

This pinout is common for every 8992-based device and
should therefore reside in the SoC device tree.

Also convert addresses into phandles.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 .../boot/dts/qcom/msm8992-bullhead-rev-101.dts      | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 4f70681e730d..5969b5cfdc85 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -23,15 +23,6 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		serial@f991e000 {
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-	};
-
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -48,6 +39,10 @@ ramoops@1ff00000 {
 	};
 };
 
+&blsp1_uart2 {
+	status = "okay";
+};
+
 &rpm_requests {
 	pm8994-regulators {
 		compatible = "qcom,rpm-pm8994-regulators";
-- 
2.27.0

