From: Roger Quadros <rogerq@ti.com>
To: <t-kristo@ti.com>
Cc: <robh@kernel.org>, <kishon@ti.com>, <nm@ti.com>,
<vigneshr@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v4 2/6] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
Date: Mon, 29 Jun 2020 15:52:50 +0300 [thread overview]
Message-ID: <20200629125254.28754-3-rogerq@ti.com> (raw)
In-Reply-To: <20200629125254.28754-1-rogerq@ti.com>
From: Kishon Vijay Abraham I <kishon@ti.com>
Add DT nodes for all instances of WIZ and SERDES modules.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 241 ++++++++++++++++++++++
1 file changed, 241 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 96c929da639d..b11cb51af747 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -4,6 +4,7 @@
*
* Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
*/
+#include <dt-bindings/phy/phy.h>
&cbass_main {
msmc_ram: sram@70000000 {
@@ -277,6 +278,246 @@
pinctrl-single,function-mask = <0xffffffff>;
};
+ dummy_cmn_refclk: dummy-cmn-refclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
+
+ dummy_cmn_refclk1: dummy-cmn-refclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
+
+ serdes_wiz0: wiz@5000000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+ assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5000000 0x0 0x5000000 0x10000>;
+
+ wiz0_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 292 11>;
+ };
+
+ wiz0_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 292 0>;
+ };
+
+ wiz0_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz0_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 292 11>;
+ };
+
+ wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz0_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz0_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes0: serdes@5000000 {
+ compatible = "ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5000000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz0 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };
+
+ serdes_wiz1: wiz@5010000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
+ assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5010000 0x0 0x5010000 0x10000>;
+
+ wiz1_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz1_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 293 13>;
+ };
+
+ wiz1_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz1_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 293 0>;
+ };
+
+ wiz1_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz1_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 293 13>;
+ };
+
+ wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div{
+ clocks = <&wiz1_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz1_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes1: serdes@5010000 {
+ compatible = "ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5010000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz1 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };
+
+ serdes_wiz2: wiz@5020000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
+ assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5020000 0x0 0x5020000 0x10000>;
+
+ wiz2_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz2_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 294 11>;
+ };
+
+ wiz2_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz2_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 294 0>;
+ };
+
+ wiz2_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz2_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 294 11>;
+ };
+
+ wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz2_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz2_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes2: serdes@5020000 {
+ compatible = "ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5020000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz2 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };
+
+ serdes_wiz3: wiz@5030000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
+ assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges = <0x5030000 0x0 0x5030000 0x10000>;
+
+ wiz3_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz3_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 295 9>;
+ };
+
+ wiz3_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz3_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 295 0>;
+ };
+
+ wiz3_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz3_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 295 9>;
+ };
+
+ wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz3_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz3_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes3: serdes@5030000 {
+ compatible = "ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x5030000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz3 0>;
+ reset-names = "sierra_reset";
+ clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ };
+ };
+
main_uart0: serial@2800000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-06-29 18:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-29 12:52 [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support Roger Quadros
2020-06-29 12:52 ` [PATCH v4 1/6] dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller Roger Quadros
2020-07-09 23:18 ` Rob Herring
2020-06-29 12:52 ` Roger Quadros [this message]
2020-06-29 12:52 ` [PATCH v4 3/6] arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux Roger Quadros
2020-07-09 23:19 ` Rob Herring
2020-06-29 12:52 ` [PATCH v4 4/6] arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX Roger Quadros
2020-06-29 12:52 ` [PATCH v4 5/6] arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 Roger Quadros
2020-06-29 12:52 ` [PATCH v4 6/6] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line Roger Quadros
2020-07-17 7:36 ` [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200629125254.28754-3-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).