[06/10] gpio: gpio-syscon: Fix formatting issues which confuse kerneldoc
diff mbox series

Message ID 20200630133345.2232932-7-lee.jones@linaro.org
State Accepted
Commit 5f3beb67b5d1c5f9906dfdf3af77e8992ca177be
Headers show
Series
  • Clean GPIO of W=1 warnings
Related show

Commit Message

Lee Jones June 30, 2020, 1:33 p.m. UTC
Kerneldoc expects struct properties to be documented using the syntax
'@.*: ', but no '@' has been provided in 'struct syscon_gpio_data's
header.  Add them to stop confusing kerneldoc.

Fixes the following W=1 warnings:

 drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'compatible' not described in 'syscon_gpio_data'
 drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'flags' not described in 'syscon_gpio_data'
 drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'bit_count' not described in 'syscon_gpio_data'
 drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'dat_bit_offset' not described in 'syscon_gpio_data'
 drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'dir_bit_offset' not described in 'syscon_gpio_data'
 drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'set' not described in 'syscon_gpio_data'

Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/gpio/gpio-syscon.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Linus Walleij July 8, 2020, 7:18 a.m. UTC | #1
On Tue, Jun 30, 2020 at 3:33 PM Lee Jones <lee.jones@linaro.org> wrote:

> Kerneldoc expects struct properties to be documented using the syntax
> '@.*: ', but no '@' has been provided in 'struct syscon_gpio_data's
> header.  Add them to stop confusing kerneldoc.
>
> Fixes the following W=1 warnings:
>
>  drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'compatible' not described in 'syscon_gpio_data'
>  drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'flags' not described in 'syscon_gpio_data'
>  drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'bit_count' not described in 'syscon_gpio_data'
>  drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'dat_bit_offset' not described in 'syscon_gpio_data'
>  drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'dir_bit_offset' not described in 'syscon_gpio_data'
>  drivers/gpio/gpio-syscon.c:48: warning: Function parameter or member 'set' not described in 'syscon_gpio_data'
>
> Cc: Alexander Shiyan <shc_work@mail.ru>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Patch applied!

Yours,
Linus Walleij

Patch
diff mbox series

diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
index 31f332074d7d5..fdd3d497b5350 100644
--- a/drivers/gpio/gpio-syscon.c
+++ b/drivers/gpio/gpio-syscon.c
@@ -24,16 +24,16 @@ 
 
 /**
  * struct syscon_gpio_data - Configuration for the device.
- * compatible:		SYSCON driver compatible string.
- * flags:		Set of GPIO_SYSCON_FEAT_ flags:
+ * @compatible:		SYSCON driver compatible string.
+ * @flags:		Set of GPIO_SYSCON_FEAT_ flags:
  *			GPIO_SYSCON_FEAT_IN:	GPIOs supports input,
  *			GPIO_SYSCON_FEAT_OUT:	GPIOs supports output,
  *			GPIO_SYSCON_FEAT_DIR:	GPIOs supports switch direction.
- * bit_count:		Number of bits used as GPIOs.
- * dat_bit_offset:	Offset (in bits) to the first GPIO bit.
- * dir_bit_offset:	Optional offset (in bits) to the first bit to switch
+ * @bit_count:		Number of bits used as GPIOs.
+ * @dat_bit_offset:	Offset (in bits) to the first GPIO bit.
+ * @dir_bit_offset:	Optional offset (in bits) to the first bit to switch
  *			GPIO direction (Used with GPIO_SYSCON_FEAT_DIR flag).
- * set:		HW specific callback to assigns output value
+ * @set:		HW specific callback to assigns output value
  *			for signal "offset"
  */