linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
To: rjui@broadcom.com, sbranden@broadcom.com,
	bcm-kernel-feedback-list@broadcom.com, linus.walleij@linaro.org,
	linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Subject: [PATCH] pinctrl: nsp: Set irq handler based on trig type
Date: Wed,  1 Jul 2020 08:47:04 +1200	[thread overview]
Message-ID: <20200630204704.17736-1-mark.tomlinson@alliedtelesis.co.nz> (raw)

Rather than always using handle_simple_irq() as the gpio_irq_chip
handler, set a more appropriate handler based on the IRQ trigger type
requested. This is important for level triggered interrupts which need
to be masked during handling. Also, always acknowledge the interrupt
regardless of whether it is edge or level triggered.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
---
 drivers/pinctrl/bcm/pinctrl-nsp-gpio.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
index bed0124388c0..349fb384113e 100644
--- a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
@@ -174,11 +174,8 @@ static void nsp_gpio_irq_ack(struct irq_data *d)
 	struct nsp_gpio *chip = gpiochip_get_data(gc);
 	unsigned gpio = d->hwirq;
 	u32 val = BIT(gpio);
-	u32 trigger_type;
 
-	trigger_type = irq_get_trigger_type(d->irq);
-	if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-		nsp_set_bit(chip, REG, NSP_GPIO_EVENT, gpio, val);
+	nsp_set_bit(chip, REG, NSP_GPIO_EVENT, gpio, val);
 }
 
 /*
@@ -262,6 +259,12 @@ static int nsp_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 
 	nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio, falling);
 	nsp_set_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio, level_low);
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(d, handle_edge_irq);
+	else
+		irq_set_handler_locked(d, handle_level_irq);
+
 	raw_spin_unlock_irqrestore(&chip->lock, flags);
 
 	dev_dbg(chip->dev, "gpio:%u level_low:%s falling:%s\n", gpio,
@@ -691,7 +694,7 @@ static int nsp_gpio_probe(struct platform_device *pdev)
 		girq->num_parents = 0;
 		girq->parents = NULL;
 		girq->default_type = IRQ_TYPE_NONE;
-		girq->handler = handle_simple_irq;
+		girq->handler = handle_bad_irq;
 	}
 
 	ret = devm_gpiochip_add_data(dev, gc, chip);
-- 
2.27.0


             reply	other threads:[~2020-06-30 20:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-30 20:47 Mark Tomlinson [this message]
2020-06-30 22:26 ` [PATCH] pinctrl: nsp: Set irq handler based on trig type Ray Jui
2020-07-01 20:14   ` Mark Tomlinson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200630204704.17736-1-mark.tomlinson@alliedtelesis.co.nz \
    --to=mark.tomlinson@alliedtelesis.co.nz \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).