From: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
To: <sre@kernel.org>, <pali@kernel.org>, <robh@kernel.org>
Cc: <afd@ti.com>, <r-rivera-matos@ti.com>, <dmurphy@ti.com>,
<linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <sspatil@android.com>
Subject: [PATCH v14 3/4] dt-bindings: power: Add the bindings for the bq2515x family of chargers.
Date: Tue, 30 Jun 2020 16:54:25 -0500 [thread overview]
Message-ID: <20200630215426.26450-4-r-rivera-matos@ti.com> (raw)
In-Reply-To: <20200630215426.26450-1-r-rivera-matos@ti.com>
The BQ2515X family of devices are highly integrated battery management
ICs that integrate the most common functions for wearable devices
namely a charger, an output voltage rail, ADC for battery and system
monitoring, and a push-button controller.
Datasheets:
http://www.ti.com/lit/ds/symlink/bq25150.pdf
http://www.ti.com/lit/ds/symlink/bq25155.pdf
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
---
.../bindings/power/supply/bq2515x.yaml | 93 +++++++++++++++++++
1 file changed, 93 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
new file mode 100644
index 000000000000..75a56773be4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq2515x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI bq2515x 500-mA Linear charger family
+
+maintainers:
+ - Dan Murphy <dmurphy@ti.com>
+ - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+
+description: |
+ The BQ2515x family is a highly integrated battery charge management IC that
+ integrates the most common functions for wearable devices, namely a charger,
+ an output voltage rail, ADC for battery and system monitoring, and
+ push-button controller.
+
+ Specifications about the charger can be found at:
+ http://www.ti.com/lit/ds/symlink/bq25150.pdf
+ http://www.ti.com/lit/ds/symlink/bq25155.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25150
+ - ti,bq25155
+
+ reg:
+ maxItems: 1
+ description: I2C address of the charger.
+
+ ac-detect-gpios:
+ description: |
+ GPIO used for connecting the bq2515x device PG (AC Detect)
+ pin.
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO used for hardware reset.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO used for low power mode of IC.
+ maxItems: 1
+
+ charge-enable-gpios:
+ description: GPIO used to turn on and off charging.
+ maxItems: 1
+
+ input-current-limit-microamp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Maximum input current in micro Amps.
+ minimum: 50000
+ maximum: 500000
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the battery node being monitored
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <50000>;
+ precharge-current-microamp = <2500>;
+ constant-charge-voltage-max-microvolt = <4000000>;
+ };
+ #include <dt-bindings/gpio/gpio.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq25150: charger@6b {
+ compatible = "ti,bq25150";
+ reg = <0x6b>;
+ monitored-battery = <&bat>;
+ input-current-limit-microamp = <100000>;
+
+ ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
--
2.27.0
next prev parent reply other threads:[~2020-06-30 21:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-30 21:54 [PATCH v14 0/4] Add JEITA properties and introduce the bq2515x charger Ricardo Rivera-Matos
2020-06-30 21:54 ` [PATCH v14 1/4] power_supply: Add additional health properties to the header Ricardo Rivera-Matos
2020-07-01 16:39 ` Dan Murphy
2020-06-30 21:54 ` [PATCH v14 2/4] dt-bindings: power: Convert battery.txt to battery.yaml Ricardo Rivera-Matos
2020-06-30 22:32 ` Joe Perches
2020-07-01 16:22 ` Dan Murphy
2020-06-30 21:54 ` Ricardo Rivera-Matos [this message]
2020-06-30 21:54 ` [PATCH v14 4/4] power: supply: bq25150 introduce the bq25150 Ricardo Rivera-Matos
2020-06-30 23:33 ` Sebastian Reichel
2020-07-01 4:17 ` [EXTERNAL] " Ricardo Rivera-Matos
2020-07-01 16:17 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200630215426.26450-4-r-rivera-matos@ti.com \
--to=r-rivera-matos@ti.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pali@kernel.org \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
--cc=sspatil@android.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).