From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <woojung.huh@microchip.com>, <UNGLinuxDriver@microchip.com>,
<andrew@lunn.ch>, <vivien.didelot@gmail.com>,
<f.fainelli@gmail.com>, <davem@davemloft.net>, <kuba@kernel.org>,
<linux@armlinux.org.uk>,
"Codrin Ciubotariu" <codrin.ciubotariu@microchip.com>
Subject: [PATCH net-next] net: dsa: microchip: split adjust_link() in phylink_mac_link_{up|down}()
Date: Thu, 2 Jul 2020 12:54:39 +0300 [thread overview]
Message-ID: <20200702095439.1355119-1-codrin.ciubotariu@microchip.com> (raw)
The DSA subsystem moved to phylink and adjust_link() became deprecated in
the process. This patch removes adjust_link from the KSZ DSA switches and
adds phylink_mac_link_up() and phylink_mac_link_down().
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
drivers/net/dsa/microchip/ksz8795.c | 3 ++-
drivers/net/dsa/microchip/ksz9477.c | 3 ++-
drivers/net/dsa/microchip/ksz_common.c | 32 ++++++++++++++++----------
drivers/net/dsa/microchip/ksz_common.h | 7 ++++--
4 files changed, 29 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 47d65b77caf7..862306a9db2c 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1111,7 +1111,8 @@ static const struct dsa_switch_ops ksz8795_switch_ops = {
.setup = ksz8795_setup,
.phy_read = ksz_phy_read16,
.phy_write = ksz_phy_write16,
- .adjust_link = ksz_adjust_link,
+ .phylink_mac_link_down = ksz_mac_link_down,
+ .phylink_mac_link_up = ksz_mac_link_up,
.port_enable = ksz_enable_port,
.port_disable = ksz_disable_port,
.get_strings = ksz8795_get_strings,
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 9a51b8a4de5d..9e4bdd950194 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1399,7 +1399,8 @@ static const struct dsa_switch_ops ksz9477_switch_ops = {
.setup = ksz9477_setup,
.phy_read = ksz9477_phy_read16,
.phy_write = ksz9477_phy_write16,
- .adjust_link = ksz_adjust_link,
+ .phylink_mac_link_down = ksz_mac_link_down,
+ .phylink_mac_link_up = ksz_mac_link_up,
.port_enable = ksz_enable_port,
.port_disable = ksz_disable_port,
.get_strings = ksz9477_get_strings,
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index fd1d6676ae4f..55ceaf00ece1 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -135,26 +135,34 @@ int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
}
EXPORT_SYMBOL_GPL(ksz_phy_write16);
-void ksz_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev)
+void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface)
{
struct ksz_device *dev = ds->priv;
struct ksz_port *p = &dev->ports[port];
/* Read all MIB counters when the link is going down. */
- if (!phydev->link) {
- p->read = true;
- schedule_delayed_work(&dev->mib_read, 0);
- }
+ p->read = true;
+ schedule_delayed_work(&dev->mib_read, 0);
+
+ mutex_lock(&dev->dev_mutex);
+ dev->live_ports &= ~(1 << port);
+ mutex_unlock(&dev->dev_mutex);
+}
+EXPORT_SYMBOL_GPL(ksz_mac_link_down);
+
+void ksz_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface, struct phy_device *phydev,
+ int speed, int duplex, bool tx_pause, bool rx_pause)
+{
+ struct ksz_device *dev = ds->priv;
+
+ /* Remember which port is connected and active. */
mutex_lock(&dev->dev_mutex);
- if (!phydev->link)
- dev->live_ports &= ~(1 << port);
- else
- /* Remember which port is connected and active. */
- dev->live_ports |= (1 << port) & dev->on_ports;
+ dev->live_ports |= (1 << port) & dev->on_ports;
mutex_unlock(&dev->dev_mutex);
}
-EXPORT_SYMBOL_GPL(ksz_adjust_link);
+EXPORT_SYMBOL_GPL(ksz_mac_link_up);
int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
{
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index f2c9bb68fd33..c0224dd0cf8a 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -159,8 +159,11 @@ void ksz_init_mib_timer(struct ksz_device *dev);
int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
-void ksz_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev);
+void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface);
+void ksz_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface, struct phy_device *phydev,
+ int speed, int duplex, bool tx_pause, bool rx_pause);
int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *buf);
int ksz_port_bridge_join(struct dsa_switch *ds, int port,
--
2.25.1
next reply other threads:[~2020-07-02 9:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-02 9:54 Codrin Ciubotariu [this message]
2020-07-02 10:19 ` [PATCH net-next] net: dsa: microchip: split adjust_link() in phylink_mac_link_{up|down}() Russell King - ARM Linux admin
2020-07-02 13:14 ` Codrin.Ciubotariu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200702095439.1355119-1-codrin.ciubotariu@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).