From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Sylwester Nawrocki <snawrocki@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Pankaj Dubey <pankaj.dubey@samsung.com>
Subject: [PATCH v3 3/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
Date: Fri, 3 Jul 2020 20:44:51 +0200 [thread overview]
Message-ID: <20200703184451.19535-3-krzk@kernel.org> (raw)
In-Reply-To: <20200703184451.19535-1-krzk@kernel.org>
Remove the regulators node and define fixed regulators directly under
the root node. This makes SMDK5420 board consistent with other Exynos
boards.
Name the fixed regulator nodes consistently.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 53 ++++++++++-------------
1 file changed, 22 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index e3f2afe8359a..83fa800fa1eb 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -32,40 +32,31 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd: fixed-regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd-supply";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vdd: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- dbvdd: fixed-regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "dbvdd-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ dbvdd: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "dbvdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- spkvdd: fixed-regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "spkvdd-supply";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ spkvdd: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "spkvdd-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
};
- usb300_vbus_reg: regulator-usb300 {
+ usb300_vbus_reg: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "VBUS0";
regulator-min-microvolt = <5000000>;
@@ -76,7 +67,7 @@
enable-active-high;
};
- usb301_vbus_reg: regulator-usb301 {
+ usb301_vbus_reg: regulator-4 {
compatible = "regulator-fixed";
regulator-name = "VBUS1";
regulator-min-microvolt = <5000000>;
--
2.17.1
prev parent reply other threads:[~2020-07-03 18:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-03 18:44 [PATCH v3 1/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen Krzysztof Kozlowski
2020-07-03 18:44 ` [PATCH v3 2/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale Krzysztof Kozlowski
2020-07-03 18:44 ` Krzysztof Kozlowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200703184451.19535-3-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
--cc=snawrocki@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).