From: Chu Lin <linchuyuan@google.com>
To: linux@roeck-us.net
Cc: belgaied@google.com, jasonling@google.com, jdelvare@suse.com,
linchuyuan@google.com, linux-hwmon@vger.kernel.org,
linux-kernel@vger.kernel.org, zhongqil@google.com
Subject: [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset
Date: Mon, 6 Jul 2020 17:54:33 +0000 [thread overview]
Message-ID: <20200706175433.1948648-1-linchuyuan@google.com> (raw)
In-Reply-To: <20200703010611.GA100794@roeck-us.net>
Per max6581, reg 4d and reg 4e is used for temperature read offset.
This patch will let the user specify the temperature read offset for
max6581. This patch is tested on max6581 and only applies to max6581.
Testing:
echo 16250 > temp2_offset
cat temp2_offset
16250
echo 17500 > temp3_offset
cat temp3_offset
17500
cat temp4_offset
0
cat temp2_offset
17500
echo 0 > temp2_offset
cat temp2_offset
0
cat temp3_offset
17500
echo -0 > temp2_offset
cat temp2_offset
0
echo -100000 > temp2_offset
cat temp2_input
4875
echo 10000 > temp2_offset
cat temp2_input
47125
echo -2000 > temp2_offset
cat temp2_input
34875
echo -0 > temp2_offset
cat temp2_input
37000
Signed-off-by: Chu Lin <linchuyuan@google.com>
---
drivers/hwmon/max6697.c | 100 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 96 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c
index da43f7ae3de1..4b71b3716f22 100644
--- a/drivers/hwmon/max6697.c
+++ b/drivers/hwmon/max6697.c
@@ -65,6 +65,9 @@ static const u8 MAX6697_REG_CRIT[] = {
#define MAX6581_REG_IDEALITY_SELECT 0x4c
#define MAX6581_REG_OFFSET 0x4d
#define MAX6581_REG_OFFSET_SELECT 0x4e
+#define MAX6581_OFFSET_MIN -31750
+#define MAX6581_OFFSET_MAX 31750
+
#define MAX6697_CONV_TIME 156 /* ms per channel, worst case */
@@ -180,6 +183,11 @@ static const struct max6697_chip_data max6697_chip_data[] = {
},
};
+static inline int max6581_offset_to_millic(int val)
+{
+ return val & (1 << 7) ? (val | 0xffffff00) * 250 : val * 250;
+}
+
static struct max6697_data *max6697_update_device(struct device *dev)
{
struct max6697_data *data = dev_get_drvdata(dev);
@@ -325,6 +333,69 @@ static ssize_t temp_store(struct device *dev,
return ret < 0 ? ret : count;
}
+static ssize_t offset_store(struct device *dev,
+ struct device_attribute *devattr, const char *buf,
+ size_t count)
+{
+ long temp;
+ u8 val, select;
+ int ret, index;
+ struct max6697_data *data;
+
+ index = to_sensor_dev_attr(devattr)->index;
+ data = dev_get_drvdata(dev);
+ select = i2c_smbus_read_byte_data(data->client,
+ MAX6581_REG_OFFSET_SELECT);
+ if (select < 0)
+ return select;
+ ret = kstrtol(buf, 10, &temp);
+ if (ret < 0)
+ return ret;
+ /* disable the offset for channel */
+ if (temp == 0) {
+ ret = i2c_smbus_write_byte_data(data->client,
+ MAX6581_REG_OFFSET_SELECT,
+ select & ~(1 << (index - 1)));
+ return ret < 0 ? ret : count;
+ }
+ temp = clamp_val(temp, MAX6581_OFFSET_MIN, MAX6581_OFFSET_MAX);
+ val = DIV_ROUND_CLOSEST(temp, 250);
+ mutex_lock(&data->update_lock);
+ ret = i2c_smbus_write_byte_data(data->client,
+ MAX6581_REG_OFFSET_SELECT,
+ select | (1 << (index - 1)));
+ if (ret < 0)
+ return ret;
+ ret = i2c_smbus_write_byte_data(data->client,
+ MAX6581_REG_OFFSET,
+ val);
+ mutex_unlock(&data->update_lock);
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t offset_show(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ int select, ret, index;
+ struct max6697_data *data;
+
+ index = to_sensor_dev_attr(devattr)->index;
+ data = dev_get_drvdata(dev);
+ select = i2c_smbus_read_byte_data(data->client,
+ MAX6581_REG_OFFSET_SELECT);
+ if (select < 0)
+ return select;
+ if (select & (1 << (index - 1))) {
+ ret = i2c_smbus_read_byte_data(data->client,
+ MAX6581_REG_OFFSET);
+ if (ret < 0)
+ return ret;
+ } else {
+ return sprintf(buf, "%d\n", 0);
+ }
+ return sprintf(buf, "%d\n", max6581_offset_to_millic(ret));
+}
+
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0);
static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, MAX6697_TEMP_MAX);
static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0, MAX6697_TEMP_CRIT);
@@ -383,6 +454,15 @@ static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5);
static SENSOR_DEVICE_ATTR_RO(temp7_fault, alarm, 6);
static SENSOR_DEVICE_ATTR_RO(temp8_fault, alarm, 7);
+/* There is no offset for local temperature so starting from temp2 */
+static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 1);
+static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 2);
+static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 3);
+static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 4);
+static SENSOR_DEVICE_ATTR_RW(temp6_offset, offset, 5);
+static SENSOR_DEVICE_ATTR_RW(temp7_offset, offset, 6);
+static SENSOR_DEVICE_ATTR_RW(temp8_offset, offset, 7);
+
static DEVICE_ATTR(dummy, 0, NULL, NULL);
static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
@@ -391,8 +471,8 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
struct device *dev = container_of(kobj, struct device, kobj);
struct max6697_data *data = dev_get_drvdata(dev);
const struct max6697_chip_data *chip = data->chip;
- int channel = index / 6; /* channel number */
- int nr = index % 6; /* attribute index within channel */
+ int channel = index / 8; /* channel number */
+ int nr = index % 7; /* attribute index within channel */
if (channel >= chip->channels)
return 0;
@@ -401,6 +481,10 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
return 0;
if (nr == 5 && !(chip->have_fault & (1 << channel)))
return 0;
+ /* offset reg is only supported on max6581 remote channels */
+ if (nr == 6)
+ if (data->type != max6581 || channel == 0)
+ return 0;
return attr->mode;
}
@@ -417,6 +501,7 @@ static struct attribute *max6697_attributes[] = {
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&dev_attr_dummy.attr,
+ &dev_attr_dummy.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -424,6 +509,7 @@ static struct attribute *max6697_attributes[] = {
&sensor_dev_attr_temp2_crit.dev_attr.attr,
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_offset.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
@@ -431,6 +517,7 @@ static struct attribute *max6697_attributes[] = {
&sensor_dev_attr_temp3_crit.dev_attr.attr,
&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_offset.dev_attr.attr,
&sensor_dev_attr_temp4_input.dev_attr.attr,
&sensor_dev_attr_temp4_max.dev_attr.attr,
@@ -438,6 +525,7 @@ static struct attribute *max6697_attributes[] = {
&sensor_dev_attr_temp4_crit.dev_attr.attr,
&sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp4_fault.dev_attr.attr,
+ &sensor_dev_attr_temp4_offset.dev_attr.attr,
&sensor_dev_attr_temp5_input.dev_attr.attr,
&sensor_dev_attr_temp5_max.dev_attr.attr,
@@ -445,6 +533,7 @@ static struct attribute *max6697_attributes[] = {
&sensor_dev_attr_temp5_crit.dev_attr.attr,
&sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp5_fault.dev_attr.attr,
+ &sensor_dev_attr_temp5_offset.dev_attr.attr,
&sensor_dev_attr_temp6_input.dev_attr.attr,
&sensor_dev_attr_temp6_max.dev_attr.attr,
@@ -452,6 +541,7 @@ static struct attribute *max6697_attributes[] = {
&sensor_dev_attr_temp6_crit.dev_attr.attr,
&sensor_dev_attr_temp6_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp6_fault.dev_attr.attr,
+ &sensor_dev_attr_temp6_offset.dev_attr.attr,
&sensor_dev_attr_temp7_input.dev_attr.attr,
&sensor_dev_attr_temp7_max.dev_attr.attr,
@@ -459,6 +549,7 @@ static struct attribute *max6697_attributes[] = {
&sensor_dev_attr_temp7_crit.dev_attr.attr,
&sensor_dev_attr_temp7_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp7_fault.dev_attr.attr,
+ &sensor_dev_attr_temp7_offset.dev_attr.attr,
&sensor_dev_attr_temp8_input.dev_attr.attr,
&sensor_dev_attr_temp8_max.dev_attr.attr,
@@ -466,6 +557,7 @@ static struct attribute *max6697_attributes[] = {
&sensor_dev_attr_temp8_crit.dev_attr.attr,
&sensor_dev_attr_temp8_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp8_fault.dev_attr.attr,
+ &sensor_dev_attr_temp8_offset.dev_attr.attr,
NULL
};
@@ -502,8 +594,8 @@ static void max6697_get_config_of(struct device_node *node,
}
prop = of_get_property(node, "transistor-ideality", &len);
if (prop && len == 2 * sizeof(u32)) {
- pdata->ideality_mask = be32_to_cpu(prop[0]);
- pdata->ideality_value = be32_to_cpu(prop[1]);
+ pdata->ideality_mask = be32_to_cpu(prop[0]);
+ pdata->ideality_value = be32_to_cpu(prop[1]);
}
}
--
2.27.0.212.ge8ba1cc988-goog
next prev parent reply other threads:[~2020-07-06 17:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-30 17:43 [PATCH] hwmon:max6697: Allow max6581 to set temperature read offset Chu Lin
2020-06-30 17:59 ` Guenter Roeck
2020-07-01 18:43 ` Chu Lin
2020-07-01 18:45 ` Chu Lin
2020-07-02 1:42 ` [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset attributes Chu Lin
2020-07-02 5:14 ` Guenter Roeck
2020-07-02 16:38 ` Chu Lin
2020-07-03 1:06 ` Guenter Roeck
2020-07-06 17:54 ` Chu Lin [this message]
2020-07-06 19:32 ` [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200706175433.1948648-1-linchuyuan@google.com \
--to=linchuyuan@google.com \
--cc=belgaied@google.com \
--cc=jasonling@google.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=zhongqil@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).