linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Walle <michael@walle.cc>
To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Jean Delvare" <jdelvare@suse.com>,
	"Guenter Roeck" <linux@roeck-us.net>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Wim Van Sebroeck" <wim@linux-watchdog.org>,
	"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Jason Cooper" <jason@lakedaemon.net>,
	"Marc Zyngier" <maz@kernel.org>,
	"Mark Brown" <broonie@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
	"Michael Walle" <michael@walle.cc>
Subject: [PATCH v5 02/13] mfd: add simple regmap based I2C driver
Date: Mon,  6 Jul 2020 19:53:42 +0200	[thread overview]
Message-ID: <20200706175353.16404-3-michael@walle.cc> (raw)
In-Reply-To: <20200706175353.16404-1-michael@walle.cc>

There are I2C devices which contain several different functions but
doesn't require any special access functions. For these kind of drivers
an I2C regmap should be enough.

Create an I2C driver which creates an I2C regmap and enumerates its
children. If a device wants to use this as its MFD core driver, it has
to add an individual compatible string. It may provide its own regmap
configuration.

Subdevices can use dev_get_regmap() on the parent to get their regmap
instance.

Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v4:
 - new patch. Lee, please bear with me. I didn't want to delay the
   new version (where a lot of remarks on the other patches were
   addressed) even more, just because we haven't figured out how
   to deal with the MFD part. So for now, I've included this one.

 drivers/mfd/Kconfig          |  9 +++++++
 drivers/mfd/Makefile         |  1 +
 drivers/mfd/simple-mfd-i2c.c | 50 ++++++++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+)
 create mode 100644 drivers/mfd/simple-mfd-i2c.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 33df0837ab41..f1536a710aca 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1162,6 +1162,15 @@ config MFD_SI476X_CORE
 	  To compile this driver as a module, choose M here: the
 	  module will be called si476x-core.
 
+config MFD_SIMPLE_MFD_I2C
+	tristate "Simple regmap based I2C devices"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  This is a consolidated driver for all MFD devices which are
+	  basically just a regmap bus driver.
+
 config MFD_SM501
 	tristate "Silicon Motion SM501"
 	depends on HAS_DMA
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a60e5f835283..78d24a3e7c9e 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -264,3 +264,4 @@ obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
 obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
 
 obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
+obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
new file mode 100644
index 000000000000..1fdca89964b1
--- /dev/null
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+struct simple_mfd_i2c_config {
+	const struct regmap_config *regmap_config;
+};
+
+static const struct regmap_config simple_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int simple_mfd_i2c_probe(struct i2c_client *i2c)
+{
+	const struct regmap_config *regmap_config = &simple_regmap_config;
+	const struct simple_mfd_i2c_config *config;
+	struct regmap *regmap;
+
+	config = device_get_match_data(&i2c->dev);
+
+	if (config && config->regmap_config)
+		regmap_config = config->regmap_config;
+
+	regmap = devm_regmap_init_i2c(i2c, regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return devm_of_platform_populate(&i2c->dev);
+}
+
+static const struct of_device_id simple_mfd_i2c_of_match[] = {
+	{}
+};
+
+static struct i2c_driver simple_mfd_i2c_driver = {
+	.probe_new = simple_mfd_i2c_probe,
+	.driver = {
+		.name = "simple-mfd-i2c",
+		.of_match_table = simple_mfd_i2c_of_match,
+	},
+};
+builtin_i2c_driver(simple_mfd_i2c_driver);
-- 
2.20.1


  parent reply	other threads:[~2020-07-06 17:57 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-06 17:53 [PATCH v5 00/13] Add support for Kontron sl28cpld Michael Walle
2020-07-06 17:53 ` [PATCH v5 01/13] regmap-irq: use fwnode instead of device node in add_irq_chip() Michael Walle
2020-07-08 10:22   ` Mark Brown
2020-07-06 17:53 ` Michael Walle [this message]
2020-07-17  9:04   ` [PATCH v5 02/13] mfd: add simple regmap based I2C driver Lee Jones
2020-07-19 22:25     ` Michael Walle
2020-07-17  9:06   ` Lee Jones
2020-07-19 22:31     ` Michael Walle
2020-07-20  7:43       ` Lee Jones
2020-07-06 17:53 ` [PATCH v5 03/13] dt-bindings: mfd: Add bindings for sl28cpld Michael Walle
2020-07-13 16:04   ` Rob Herring
2020-07-06 17:53 ` [PATCH v5 04/13] mfd: simple-mfd-i2c: add sl28cpld support Michael Walle
2020-07-06 17:53 ` [PATCH v5 05/13] irqchip: add sl28cpld interrupt controller support Michael Walle
2020-07-08  9:37   ` Marc Zyngier
2020-07-06 17:53 ` [PATCH v5 06/13] watchdog: add support for sl28cpld watchdog Michael Walle
2020-07-06 17:53 ` [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller Michael Walle
2020-07-09  8:50   ` Uwe Kleine-König
2020-07-11 17:28     ` Michael Walle
2020-07-13  8:47       ` Uwe Kleine-König
2020-07-14 11:31         ` Michael Walle
2020-07-14 16:08           ` Uwe Kleine-König
2020-07-14 21:09             ` Michael Walle
2020-07-15 16:36               ` Uwe Kleine-König
2020-07-15 17:45                 ` Michael Walle
2020-07-15 18:18                   ` Uwe Kleine-König
2020-07-15 20:41                     ` Michael Walle
2020-07-16  6:10                       ` Uwe Kleine-König
2020-07-06 17:53 ` [PATCH v5 08/13] gpio: add support for the sl28cpld GPIO controller Michael Walle
2020-07-08  7:35   ` Linus Walleij
2020-07-17  0:25   ` kernel test robot
2020-07-06 17:53 ` [PATCH v5 09/13] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle
2020-07-06 17:53 ` [PATCH v5 10/13] arm64: dts: freescale: sl28: enable sl28cpld Michael Walle
2020-07-06 17:53 ` [PATCH v5 11/13] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle
2020-07-06 17:53 ` [PATCH v5 12/13] arm64: dts: freescale: sl28: enable LED support Michael Walle
2020-07-17  8:36   ` Pavel Machek
2020-07-17 21:54     ` Michael Walle
2020-07-06 17:53 ` [PATCH v5 13/13] arm64: dts: freescale: sl28: enable fan support Michael Walle
2020-07-08  7:39   ` Linus Walleij
2020-07-08  7:56     ` Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706175353.16404-3-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jason@lakedaemon.net \
    --cc=jdelvare@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=leoyang.li@nxp.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).