From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tom Joseph <tjoseph@cadence.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v7 07/14] PCI: cadence: Add new *ops* for CPU addr fixup
Date: Mon, 13 Jul 2020 16:31:34 +0530 [thread overview]
Message-ID: <20200713110141.13156-8-kishon@ti.com> (raw)
In-Reply-To: <20200713110141.13156-1-kishon@ti.com>
Cadence driver uses "mem" memory resource to obtain the offset of
configuration space address region, memory space address region and
message space address region. The obtained offset is used to program
the Address Translation Unit (ATU). However certain platforms like TI's
J721E SoC require the absolute address to be programmed in the ATU and
not just the offset. Add new *ops* for CPU addr fixup for the platform
drivers to provide the correct address to be programmed in the ATU.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../pci/controller/cadence/pcie-cadence-host.c | 15 ++++-----------
.../pci/controller/cadence/pcie-cadence-plat.c | 13 +++++++++++++
drivers/pci/controller/cadence/pcie-cadence.c | 8 ++++++--
drivers/pci/controller/cadence/pcie-cadence.h | 1 +
4 files changed, 24 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index a8303258874c..10127ea71b83 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -327,15 +327,14 @@ static int cdns_pcie_host_map_dma_ranges(struct cdns_pcie_rc *rc)
static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
{
struct cdns_pcie *pcie = &rc->pcie;
- struct resource *mem_res = pcie->mem_res;
struct resource *bus_range = rc->bus_range;
struct resource *cfg_res = rc->cfg_res;
struct device *dev = pcie->dev;
struct device_node *np = dev->of_node;
struct of_pci_range_parser parser;
+ u64 cpu_addr = cfg_res->start;
struct of_pci_range range;
u32 addr0, addr1, desc1;
- u64 cpu_addr;
int r, err;
/*
@@ -348,7 +347,9 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_PCI_ADDR1(0), addr1);
cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(0), desc1);
- cpu_addr = cfg_res->start - mem_res->start;
+ if (pcie->ops->cpu_addr_fixup)
+ cpu_addr = pcie->ops->cpu_addr_fixup(pcie, cpu_addr);
+
addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(12) |
(lower_32_bits(cpu_addr) & GENMASK(31, 8));
addr1 = upper_32_bits(cpu_addr);
@@ -477,14 +478,6 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
}
rc->cfg_res = res;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
- if (!res) {
- dev_err(dev, "missing \"mem\"\n");
- return -EINVAL;
- }
-
- pcie->mem_res = res;
-
ret = cdns_pcie_start_link(pcie);
if (ret) {
dev_err(dev, "Failed to start link\n");
diff --git a/drivers/pci/controller/cadence/pcie-cadence-plat.c b/drivers/pci/controller/cadence/pcie-cadence-plat.c
index f5c6bf6dfcb8..6f5f07b3eed1 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-plat.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-plat.c
@@ -13,6 +13,8 @@
#include <linux/of_device.h>
#include "pcie-cadence.h"
+#define CDNS_PLAT_CPU_TO_BUS_ADDR 0x0FFFFFFF
+
/**
* struct cdns_plat_pcie - private data for this PCIe platform driver
* @pcie: Cadence PCIe controller
@@ -30,6 +32,15 @@ struct cdns_plat_pcie_of_data {
static const struct of_device_id cdns_plat_pcie_of_match[];
+static u64 cdns_plat_cpu_addr_fixup(struct cdns_pcie *pcie, u64 cpu_addr)
+{
+ return cpu_addr & CDNS_PLAT_CPU_TO_BUS_ADDR;
+}
+
+static const struct cdns_pcie_ops cdns_plat_ops = {
+ .cpu_addr_fixup = cdns_plat_cpu_addr_fixup,
+};
+
static int cdns_plat_pcie_probe(struct platform_device *pdev)
{
const struct cdns_plat_pcie_of_data *data;
@@ -66,6 +77,7 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
rc = pci_host_bridge_priv(bridge);
rc->pcie.dev = dev;
+ rc->pcie.ops = &cdns_plat_ops;
cdns_plat_pcie->pcie = &rc->pcie;
cdns_plat_pcie->is_rc = is_rc;
@@ -93,6 +105,7 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
return -ENOMEM;
ep->pcie.dev = dev;
+ ep->pcie.ops = &cdns_plat_ops;
cdns_plat_pcie->pcie = &ep->pcie;
cdns_plat_pcie->is_rc = is_rc;
diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index cd795f6fc1e2..8a02981fd456 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -73,7 +73,9 @@ void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 fn,
cdns_pcie_writel(pcie, CDNS_PCIE_AT_OB_REGION_DESC1(r), desc1);
/* Set the CPU address */
- cpu_addr -= pcie->mem_res->start;
+ if (pcie->ops->cpu_addr_fixup)
+ cpu_addr = pcie->ops->cpu_addr_fixup(pcie, cpu_addr);
+
addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(nbits) |
(lower_32_bits(cpu_addr) & GENMASK(31, 8));
addr1 = upper_32_bits(cpu_addr);
@@ -100,7 +102,9 @@ void cdns_pcie_set_outbound_region_for_normal_msg(struct cdns_pcie *pcie, u8 fn,
}
/* Set the CPU address */
- cpu_addr -= pcie->mem_res->start;
+ if (pcie->ops->cpu_addr_fixup)
+ cpu_addr = pcie->ops->cpu_addr_fixup(pcie, cpu_addr);
+
addr0 = CDNS_PCIE_AT_OB_REGION_CPU_ADDR0_NBITS(17) |
(lower_32_bits(cpu_addr) & GENMASK(31, 8));
addr1 = upper_32_bits(cpu_addr);
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 54e10caf2d4b..1d2bdc4e08e4 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -254,6 +254,7 @@ struct cdns_pcie_ops {
int (*start_link)(struct cdns_pcie *pcie);
void (*stop_link)(struct cdns_pcie *pcie);
bool (*link_up)(struct cdns_pcie *pcie);
+ u64 (*cpu_addr_fixup)(struct cdns_pcie *pcie, u64 cpu_addr);
};
/**
--
2.17.1
next prev parent reply other threads:[~2020-07-13 11:02 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-13 11:01 [PATCH v7 00/14] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 01/14] PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 02/14] linux/kernel.h: Add PTR_ALIGN_DOWN macro Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 03/14] PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses Kishon Vijay Abraham I
2020-07-21 15:49 ` Lorenzo Pieralisi
2020-07-22 1:43 ` Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 04/14] PCI: cadence: Add support to start link and verify link status Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 05/14] PCI: cadence: Allow pci_host_bridge to have custom pci_ops Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 06/14] dt-bindings: PCI: cadence: Remove "mem" from reg binding Kishon Vijay Abraham I
2020-07-13 11:01 ` Kishon Vijay Abraham I [this message]
2020-07-13 11:01 ` [PATCH v7 08/14] PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 09/14] PCI: cadence: Add MSI-X support to Endpoint driver Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 10/14] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 11/14] dt-bindings: PCI: Add EP " Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 12/14] PCI: j721e: Add TI J721E PCIe driver Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 13/14] misc: pci_endpoint_test: Add J721E in pci_device_id table Kishon Vijay Abraham I
2020-07-13 11:01 ` [PATCH v7 14/14] MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe Kishon Vijay Abraham I
2020-07-20 10:08 ` [PATCH v7 00/14] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200713110141.13156-8-kishon@ti.com \
--to=kishon@ti.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
--cc=tjoseph@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).