linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yafang Shao <chris@chrisdown.name>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
	Michal Hocko <mhocko@kernel.org>, Roman Gushchin <guro@fb.com>,
	Yafang Shao <laoar.shao@gmail.com>,
	linux-mm@kvack.org, cgroups@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 1/2] mm, memcg: Avoid stale protection values when cgroup is above protection
Date: Mon, 13 Jul 2020 12:05:54 +0100	[thread overview]
Message-ID: <044fb8ecffd001c7905d27c0c2ad998069fdc396.1594638158.git.chris@chrisdown.name> (raw)
In-Reply-To: <cover.1594638158.git.chris@chrisdown.name>

From: Yafang Shao <laoar.shao@gmail.com>

A cgroup can have both memory protection and a memory limit to isolate
it from its siblings in both directions - for example, to prevent it
from being shrunk below 2G under high pressure from outside, but also
from growing beyond 4G under low pressure.

Commit 9783aa9917f8 ("mm, memcg: proportional memory.{low,min} reclaim")
implemented proportional scan pressure so that multiple siblings in
excess of their protection settings don't get reclaimed equally but
instead in accordance to their unprotected portion.

During limit reclaim, this proportionality shouldn't apply of course:
there is no competition, all pressure is from within the cgroup and
should be applied as such. Reclaim should operate at full efficiency.

However, mem_cgroup_protected() never expected anybody to look at the
effective protection values when it indicated that the cgroup is above
its protection. As a result, a query during limit reclaim may return
stale protection values that were calculated by a previous reclaim cycle
in which the cgroup did have siblings.

When this happens, reclaim is unnecessarily hesitant and potentially
slow to meet the desired limit. In theory this could lead to premature
OOM kills, although it's not obvious this has occurred in practice.

Workaround the problem by special casing reclaim roots in
mem_cgroup_protection. These memcgs are never participating in the
reclaim protection because the reclaim is internal.

We have to ignore effective protection values for reclaim roots because
mem_cgroup_protected might be called from racing reclaim contexts with
different roots. Calculation is relying on root -> leaf tree traversal
therefore top-down reclaim protection invariants should hold. The only
exception is the reclaim root which should have effective protection set
to 0 but that would be problematic for the following setup:
 Let's have global and A's reclaim in parallel:
  |
  A (low=2G, usage = 3G, max = 3G, children_low_usage = 1.5G)
  |\
  | C (low = 1G, usage = 2.5G)
  B (low = 1G, usage = 0.5G)

 for A reclaim we have
 B.elow = B.low
 C.elow = C.low

 For the global reclaim
 A.elow = A.low
 B.elow = min(B.usage, B.low) because children_low_usage <= A.elow
 C.elow = min(C.usage, C.low)

 With the effective values resetting we have A reclaim
 A.elow = 0
 B.elow = B.low
 C.elow = C.low

 and global reclaim could see the above and then
 B.elow = C.elow = 0 because children_low_usage > A.elow

Which means that protected memcgs would get reclaimed.

In future we would like to make mem_cgroup_protected more robust against
racing reclaim contexts but that is likely more complex solution than
this simple workaround.

[hannes@cmpxchg.org - large part of the changelog]
[mhocko@suse.com - workaround explanation]
[chris@chrisdown.name - retitle]
Fixes: 9783aa9917f8 ("mm, memcg: proportional memory.{low,min} reclaim")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Chris Down <chris@chrisdown.name>
---
 include/linux/memcontrol.h | 42 ++++++++++++++++++++++++++++++++++++--
 mm/memcontrol.c            |  8 ++++++++
 mm/vmscan.c                |  3 ++-
 3 files changed, 50 insertions(+), 3 deletions(-)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index b8f52a3fed90..33d834a187e5 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -363,12 +363,49 @@ static inline bool mem_cgroup_disabled(void)
 	return !cgroup_subsys_enabled(memory_cgrp_subsys);
 }
 
-static inline unsigned long mem_cgroup_protection(struct mem_cgroup *memcg,
+static inline unsigned long mem_cgroup_protection(struct mem_cgroup *root,
+						  struct mem_cgroup *memcg,
 						  bool in_low_reclaim)
 {
 	if (mem_cgroup_disabled())
 		return 0;
 
+	/*
+	 * There is no reclaim protection applied to a targeted reclaim.
+	 * We are special casing this specific case here because
+	 * mem_cgroup_protected calculation is not robust enough to keep
+	 * the protection invariant for calculated effective values for
+	 * parallel reclaimers with different reclaim target. This is
+	 * especially a problem for tail memcgs (as they have pages on LRU)
+	 * which would want to have effective values 0 for targeted reclaim
+	 * but a different value for external reclaim.
+	 *
+	 * Example
+	 * Let's have global and A's reclaim in parallel:
+	 *  |
+	 *  A (low=2G, usage = 3G, max = 3G, children_low_usage = 1.5G)
+	 *  |\
+	 *  | C (low = 1G, usage = 2.5G)
+	 *  B (low = 1G, usage = 0.5G)
+	 *
+	 * For the global reclaim
+	 * A.elow = A.low
+	 * B.elow = min(B.usage, B.low) because children_low_usage <= A.elow
+	 * C.elow = min(C.usage, C.low)
+	 *
+	 * With the effective values resetting we have A reclaim
+	 * A.elow = 0
+	 * B.elow = B.low
+	 * C.elow = C.low
+	 *
+	 * If the global reclaim races with A's reclaim then
+	 * B.elow = C.elow = 0 because children_low_usage > A.elow)
+	 * is possible and reclaiming B would be violating the protection.
+	 *
+	 */
+	if (root == memcg)
+		return 0;
+
 	if (in_low_reclaim)
 		return READ_ONCE(memcg->memory.emin);
 
@@ -899,7 +936,8 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
 {
 }
 
-static inline unsigned long mem_cgroup_protection(struct mem_cgroup *memcg,
+static inline unsigned long mem_cgroup_protection(struct mem_cgroup *root,
+						  struct mem_cgroup *memcg,
 						  bool in_low_reclaim)
 {
 	return 0;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 0145a77aa074..21b620e36aa0 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -6566,6 +6566,14 @@ enum mem_cgroup_protection mem_cgroup_protected(struct mem_cgroup *root,
 
 	if (!root)
 		root = root_mem_cgroup;
+
+	/*
+	 * Effective values of the reclaim targets are ignored so they
+	 * can be stale. Have a look at mem_cgroup_protection for more
+	 * details.
+	 * TODO: calculation should be more robust so that we do not need
+	 * that special casing.
+	 */
 	if (memcg == root)
 		return MEMCG_PROT_NONE;
 
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 5215840ee217..89921a12acae 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2326,7 +2326,8 @@ static void get_scan_count(struct lruvec *lruvec, struct scan_control *sc,
 		unsigned long protection;
 
 		lruvec_size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx);
-		protection = mem_cgroup_protection(memcg,
+		protection = mem_cgroup_protection(sc->target_mem_cgroup,
+						   memcg,
 						   sc->memcg_low_reclaim);
 
 		if (protection) {
-- 
2.27.0


  reply	other threads:[~2020-07-13 11:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-13 11:04 [PATCH v4 0/2] mm, memcg: memory.{low,min} reclaim fix & cleanup Chris Down
2020-07-13 11:05 ` Yafang Shao [this message]
2020-07-13 11:06 ` [PATCH v4 2/2] mm, memcg: Decouple e{low,min} state mutations from protection checks Chris Down

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=044fb8ecffd001c7905d27c0c2ad998069fdc396.1594638158.git.chris@chrisdown.name \
    --to=chris@chrisdown.name \
    --cc=akpm@linux-foundation.org \
    --cc=cgroups@vger.kernel.org \
    --cc=guro@fb.com \
    --cc=hannes@cmpxchg.org \
    --cc=laoar.shao@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).