From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: arnd@arndb.de, gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org,
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Subject: [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
Date: Sat, 18 Jul 2020 09:02:24 +0200 [thread overview]
Message-ID: <20200718070224.337964-1-christophe.jaillet@wanadoo.fr> (raw)
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
because a spin_lock is hold in 'ilo_open()' before calling
'ilo_ccb_setup()'
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
If needed, see post from Christoph Hellwig on the kernel-janitors ML:
https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
---
drivers/misc/hpilo.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 10c975662f8b..c9539c89a925 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
memset_io(device_ccb, 0, sizeof(struct ccb));
/* free resources used to back send/recv queues */
- pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+ dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
+ data->dma_pa);
}
static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
@@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
2 * desc_mem_sz(NR_QENTRY) +
ILO_START_ALIGN + ILO_CACHE_SZ;
- data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
- &data->dma_pa);
+ data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
+ &data->dma_pa, GFP_ATOMIC);
if (!data->dma_va)
return -ENOMEM;
--
2.25.1
next reply other threads:[~2020-07-18 7:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-18 7:02 Christophe JAILLET [this message]
2020-07-23 7:34 ` [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API Greg KH
2020-07-23 8:59 ` Christophe JAILLET
2020-07-23 10:56 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200718070224.337964-1-christophe.jaillet@wanadoo.fr \
--to=christophe.jaillet@wanadoo.fr \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).