From: "Alexander A. Klimov" <grandmaster@al2klimov.de>
To: Larry.Finger@lwfinger.net, kvalo@codeaurora.org,
davem@davemloft.net, kuba@kernel.org,
linux-wireless@vger.kernel.org, b43-dev@lists.infradead.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Subject: [PATCH for v5.9] b43legacy: Replace HTTP links with HTTPS ones
Date: Sun, 19 Jul 2020 13:11:24 +0200 [thread overview]
Message-ID: <20200719111124.58167-1-grandmaster@al2klimov.de> (raw)
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
Continuing my work started at 93431e0607e5.
See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@al2klimov.de>' v5.7..master
(Actually letting a shell for loop submit all this stuff for me.)
If there are any URLs to be removed completely
or at least not (just) HTTPSified:
Just clearly say so and I'll *undo my change*.
See also: https://lkml.org/lkml/2020/6/27/64
If there are any valid, but yet not changed URLs:
See: https://lkml.org/lkml/2020/6/26/837
If you apply the patch, please let me know.
Sorry again to all maintainers who complained about subject lines.
Now I realized that you want an actually perfect prefixes,
not just subsystem ones.
I tried my best...
And yes, *I could* (at least half-)automate it.
Impossible is nothing! :)
drivers/net/wireless/broadcom/b43legacy/main.c | 8 ++++----
drivers/net/wireless/broadcom/b43legacy/phy.c | 8 ++++----
drivers/net/wireless/broadcom/b43legacy/radio.c | 8 ++++----
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/broadcom/b43legacy/main.c b/drivers/net/wireless/broadcom/b43legacy/main.c
index 5208a39fd6f7..177a5d85915f 100644
--- a/drivers/net/wireless/broadcom/b43legacy/main.c
+++ b/drivers/net/wireless/broadcom/b43legacy/main.c
@@ -591,7 +591,7 @@ static void b43legacy_synchronize_irq(struct b43legacy_wldev *dev)
}
/* DummyTransmission function, as documented on
- * http://bcm-specs.sipsolutions.net/DummyTransmission
+ * https://bcm-specs.sipsolutions.net/DummyTransmission
*/
void b43legacy_dummy_transmission(struct b43legacy_wldev *dev)
{
@@ -1870,7 +1870,7 @@ static int b43legacy_upload_initvals(struct b43legacy_wldev *dev)
}
/* Initialize the GPIOs
- * http://bcm-specs.sipsolutions.net/GPIO
+ * https://bcm-specs.sipsolutions.net/GPIO
*/
static int b43legacy_gpio_init(struct b43legacy_wldev *dev)
{
@@ -1960,7 +1960,7 @@ void b43legacy_mac_enable(struct b43legacy_wldev *dev)
}
}
-/* http://bcm-specs.sipsolutions.net/SuspendMAC */
+/* https://bcm-specs.sipsolutions.net/SuspendMAC */
void b43legacy_mac_suspend(struct b43legacy_wldev *dev)
{
int i;
@@ -2141,7 +2141,7 @@ static void b43legacy_chip_exit(struct b43legacy_wldev *dev)
}
/* Initialize the chip
- * http://bcm-specs.sipsolutions.net/ChipInit
+ * https://bcm-specs.sipsolutions.net/ChipInit
*/
static int b43legacy_chip_init(struct b43legacy_wldev *dev)
{
diff --git a/drivers/net/wireless/broadcom/b43legacy/phy.c b/drivers/net/wireless/broadcom/b43legacy/phy.c
index a659259bc51a..05404fbd1e70 100644
--- a/drivers/net/wireless/broadcom/b43legacy/phy.c
+++ b/drivers/net/wireless/broadcom/b43legacy/phy.c
@@ -129,7 +129,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev)
}
/* initialize B PHY power control
- * as described in http://bcm-specs.sipsolutions.net/InitPowerControl
+ * as described in https://bcm-specs.sipsolutions.net/InitPowerControl
*/
static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev)
{
@@ -1461,7 +1461,7 @@ void b43legacy_phy_set_baseband_attenuation(struct b43legacy_wldev *dev,
b43legacy_phy_write(dev, 0x0060, value);
}
-/* http://bcm-specs.sipsolutions.net/LocalOscillator/Measure */
+/* https://bcm-specs.sipsolutions.net/LocalOscillator/Measure */
void b43legacy_phy_lo_g_measure(struct b43legacy_wldev *dev)
{
static const u8 pairorder[10] = { 3, 1, 5, 7, 9, 2, 0, 4, 6, 8 };
@@ -1721,7 +1721,7 @@ void b43legacy_phy_lo_mark_all_unused(struct b43legacy_wldev *dev)
}
}
-/* http://bcm-specs.sipsolutions.net/EstimatePowerOut
+/* https://bcm-specs.sipsolutions.net/EstimatePowerOut
* This function converts a TSSI value to dBm in Q5.2
*/
static s8 b43legacy_phy_estimate_power_out(struct b43legacy_wldev *dev, s8 tssi)
@@ -1747,7 +1747,7 @@ static s8 b43legacy_phy_estimate_power_out(struct b43legacy_wldev *dev, s8 tssi)
return dbm;
}
-/* http://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */
+/* https://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */
void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
diff --git a/drivers/net/wireless/broadcom/b43legacy/radio.c b/drivers/net/wireless/broadcom/b43legacy/radio.c
index da40d1ca8723..06891b4f837b 100644
--- a/drivers/net/wireless/broadcom/b43legacy/radio.c
+++ b/drivers/net/wireless/broadcom/b43legacy/radio.c
@@ -313,14 +313,14 @@ u8 b43legacy_radio_aci_scan(struct b43legacy_wldev *dev)
return ret[channel - 1];
}
-/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+/* https://bcm-specs.sipsolutions.net/NRSSILookupTable */
void b43legacy_nrssi_hw_write(struct b43legacy_wldev *dev, u16 offset, s16 val)
{
b43legacy_phy_write(dev, B43legacy_PHY_NRSSILT_CTRL, offset);
b43legacy_phy_write(dev, B43legacy_PHY_NRSSILT_DATA, (u16)val);
}
-/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+/* https://bcm-specs.sipsolutions.net/NRSSILookupTable */
s16 b43legacy_nrssi_hw_read(struct b43legacy_wldev *dev, u16 offset)
{
u16 val;
@@ -331,7 +331,7 @@ s16 b43legacy_nrssi_hw_read(struct b43legacy_wldev *dev, u16 offset)
return (s16)val;
}
-/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+/* https://bcm-specs.sipsolutions.net/NRSSILookupTable */
void b43legacy_nrssi_hw_update(struct b43legacy_wldev *dev, u16 val)
{
u16 i;
@@ -345,7 +345,7 @@ void b43legacy_nrssi_hw_update(struct b43legacy_wldev *dev, u16 val)
}
}
-/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+/* https://bcm-specs.sipsolutions.net/NRSSILookupTable */
void b43legacy_nrssi_mem_update(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
--
2.27.0
next reply other threads:[~2020-07-19 11:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-19 11:11 Alexander A. Klimov [this message]
2020-08-02 15:17 ` [PATCH for v5.9] b43legacy: Replace HTTP links with HTTPS ones Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200719111124.58167-1-grandmaster@al2klimov.de \
--to=grandmaster@al2klimov.de \
--cc=Larry.Finger@lwfinger.net \
--cc=b43-dev@lists.infradead.org \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).