From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <nicolas.ferre@microchip.com>, <claudiu.beznea@microchip.com>,
<davem@davemloft.net>, <kuba@kernel.org>, <andrew@lunn.ch>,
<f.fainelli@gmail.com>, <robh+dt@kernel.org>,
<alexandre.belloni@bootlin.com>,
<ludovic.desroches@microchip.com>,
"Codrin Ciubotariu" <codrin.ciubotariu@microchip.com>
Subject: [PATCH net-next 4/7] ARM: dts: at91: sama5d2: add an mdio sub-node to macb
Date: Tue, 21 Jul 2020 13:02:31 +0300 [thread overview]
Message-ID: <20200721100234.1302910-5-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20200721100234.1302910-1-codrin.ciubotariu@microchip.com>
Use the new macb bindings and add an mdio sub-node to contain all the
phy nodes.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 16 ++++++++++------
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 17 ++++++++++-------
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 13 ++++++++-----
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 12 ++++++++----
4 files changed, 36 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index b1f994c0ae79..dfcee23dcce0 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -84,12 +84,16 @@ macb0: ethernet@f8008000 {
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
- ethernet-phy@0 {
- reg = <0x0>;
- interrupt-parent = <&pioA>;
- interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@0 {
+ reg = <0x0>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ };
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index a06700e53e4c..9c4dce29d2fe 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -181,13 +181,16 @@ &macb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
-
- ethernet-phy@0 {
- reg = <0x0>;
- interrupt-parent = <&pioA>;
- interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@0 {
+ reg = <0x0>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ };
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index c894c7c788a9..fc3375c43ef6 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -140,11 +140,14 @@ macb0: ethernet@f8008000 {
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
phy-mode = "rmii";
status = "okay";
-
- ethernet-phy@1 {
- reg = <0x1>;
- interrupt-parent = <&pioA>;
- interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioA>;
+ interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index a927165ea7c2..a62f475d9d0a 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -149,10 +149,14 @@ macb0: ethernet@f8008000 {
phy-mode = "rmii";
status = "okay";
- ethernet-phy@1 {
- reg = <0x1>;
- interrupt-parent = <&pioA>;
- interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
--
2.25.1
next prev parent reply other threads:[~2020-07-21 10:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-21 10:02 [PATCH net-next 0/7] Add an MDIO sub-node under MACB Codrin Ciubotariu
2020-07-21 10:02 ` [PATCH net-next 1/7] net: macb: use device-managed devm_mdiobus_alloc() Codrin Ciubotariu
2020-07-21 10:02 ` [PATCH net-next 2/7] macb: bindings doc: use an MDIO node as a container for PHY nodes Codrin Ciubotariu
2020-07-21 13:29 ` Alexandre Belloni
2020-07-21 13:44 ` Codrin.Ciubotariu
2020-07-21 10:02 ` [PATCH net-next 3/7] net: macb: parse PHY nodes found under an MDIO node Codrin Ciubotariu
2020-07-21 13:36 ` Andrew Lunn
2020-07-21 13:40 ` Codrin.Ciubotariu
2020-07-21 13:42 ` Codrin.Ciubotariu
2020-07-21 13:44 ` Codrin.Ciubotariu
2020-07-21 10:02 ` Codrin Ciubotariu [this message]
2020-07-21 10:02 ` [PATCH net-next 5/7] ARM: dts: at91: sama5d3: add an mdio sub-node to macb Codrin Ciubotariu
2020-07-21 10:02 ` [PATCH net-next 6/7] ARM: dts: at91: sama5d4: " Codrin Ciubotariu
2020-07-21 10:02 ` [PATCH net-next 7/7] ARM: dts: at91: sam9x60: " Codrin Ciubotariu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200721100234.1302910-5-codrin.ciubotariu@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=claudiu.beznea@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).