[12/16] clocksource/drivers/sh_cmt: Use "kHz" for kilohertz
diff mbox series

Message ID 20200723152639.639771-12-daniel.lezcano@linaro.org
State Accepted
Commit ad7794d4dd0c3f03a81a0dbec3e9e3906edb9893
Headers show
Series
  • [01/16] dt-bindings: atmel-tcb: convert bindings to json-schema
Related show

Commit Message

Daniel Lezcano July 23, 2020, 3:26 p.m. UTC
From: Geert Uytterhoeven <geert+renesas@glider.be>

"K" stands for "kelvin".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200618080212.16560-1-geert+renesas@glider.be
---
 drivers/clocksource/sh_cmt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Patch
diff mbox series

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 12ac75f7571f..760777458a90 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -349,7 +349,7 @@  static int sh_cmt_enable(struct sh_cmt_channel *ch)
 
 	/*
 	 * According to the sh73a0 user's manual, as CMCNT can be operated
-	 * only by the RCLK (Pseudo 32 KHz), there's one restriction on
+	 * only by the RCLK (Pseudo 32 kHz), there's one restriction on
 	 * modifying CMCNT register; two RCLK cycles are necessary before
 	 * this register is either read or any modification of the value
 	 * it holds is reflected in the LSI's actual operation.