From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: tglx@linutronix.de
Cc: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>,
"H . Nikolaus Schaller" <hns@goldelico.com>,
"Paul Boddie" <paul@boddie.org.uk>,
"Paul Cercueil" <paul@crapouillou.net>,
linux-kernel@vger.kernel.org (open list:CLOCKSOURCE,
CLOCKEVENT DRIVERS)
Subject: [PATCH 10/16] clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT.
Date: Thu, 23 Jul 2020 17:26:30 +0200 [thread overview]
Message-ID: <20200723152639.639771-10-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20200723152639.639771-1-daniel.lezcano@linaro.org>
From: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Enable clock event handling on per CPU core basis. Make sure that
interrupts raised on the first core execute event handlers on the
correct CPU core. This driver is required by Ingenic processors
that support SMP/SMT, such as JZ4780 and X2000.
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200624170749.31762-2-zhouyanjie@wanyeetech.com
---
drivers/clocksource/ingenic-timer.c | 182 +++++++++++++++++++---------
1 file changed, 124 insertions(+), 58 deletions(-)
diff --git a/drivers/clocksource/ingenic-timer.c b/drivers/clocksource/ingenic-timer.c
index 496333650de2..58fd9189fab7 100644
--- a/drivers/clocksource/ingenic-timer.c
+++ b/drivers/clocksource/ingenic-timer.c
@@ -1,7 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * JZ47xx SoCs TCU IRQ driver
+ * Ingenic SoCs TCU IRQ driver
* Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ * Copyright (C) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
*/
#include <linux/bitops.h>
@@ -15,24 +16,35 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/overflow.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/sched_clock.h>
#include <dt-bindings/clock/ingenic,tcu.h>
+static DEFINE_PER_CPU(call_single_data_t, ingenic_cevt_csd);
+
struct ingenic_soc_info {
unsigned int num_channels;
};
+struct ingenic_tcu_timer {
+ unsigned int cpu;
+ unsigned int channel;
+ struct clock_event_device cevt;
+ struct clk *clk;
+ char name[8];
+};
+
struct ingenic_tcu {
struct regmap *map;
- struct clk *timer_clk, *cs_clk;
- unsigned int timer_channel, cs_channel;
- struct clock_event_device cevt;
+ struct device_node *np;
+ struct clk *cs_clk;
+ unsigned int cs_channel;
struct clocksource cs;
- char name[4];
unsigned long pwm_channels_mask;
+ struct ingenic_tcu_timer timers[];
};
static struct ingenic_tcu *ingenic_tcu;
@@ -52,16 +64,24 @@ static u64 notrace ingenic_tcu_timer_cs_read(struct clocksource *cs)
return ingenic_tcu_timer_read();
}
-static inline struct ingenic_tcu *to_ingenic_tcu(struct clock_event_device *evt)
+static inline struct ingenic_tcu *
+to_ingenic_tcu(struct ingenic_tcu_timer *timer)
+{
+ return container_of(timer, struct ingenic_tcu, timers[timer->cpu]);
+}
+
+static inline struct ingenic_tcu_timer *
+to_ingenic_tcu_timer(struct clock_event_device *evt)
{
- return container_of(evt, struct ingenic_tcu, cevt);
+ return container_of(evt, struct ingenic_tcu_timer, cevt);
}
static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
{
- struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+ struct ingenic_tcu_timer *timer = to_ingenic_tcu_timer(evt);
+ struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
- regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+ regmap_write(tcu->map, TCU_REG_TECR, BIT(timer->channel));
return 0;
}
@@ -69,27 +89,40 @@ static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
static int ingenic_tcu_cevt_set_next(unsigned long next,
struct clock_event_device *evt)
{
- struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+ struct ingenic_tcu_timer *timer = to_ingenic_tcu_timer(evt);
+ struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
if (next > 0xffff)
return -EINVAL;
- regmap_write(tcu->map, TCU_REG_TDFRc(tcu->timer_channel), next);
- regmap_write(tcu->map, TCU_REG_TCNTc(tcu->timer_channel), 0);
- regmap_write(tcu->map, TCU_REG_TESR, BIT(tcu->timer_channel));
+ regmap_write(tcu->map, TCU_REG_TDFRc(timer->channel), next);
+ regmap_write(tcu->map, TCU_REG_TCNTc(timer->channel), 0);
+ regmap_write(tcu->map, TCU_REG_TESR, BIT(timer->channel));
return 0;
}
+static void ingenic_per_cpu_event_handler(void *info)
+{
+ struct clock_event_device *cevt = (struct clock_event_device *) info;
+
+ cevt->event_handler(cevt);
+}
+
static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
{
- struct clock_event_device *evt = dev_id;
- struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+ struct ingenic_tcu_timer *timer = dev_id;
+ struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
+ call_single_data_t *csd;
- regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+ regmap_write(tcu->map, TCU_REG_TECR, BIT(timer->channel));
- if (evt->event_handler)
- evt->event_handler(evt);
+ if (timer->cevt.event_handler) {
+ csd = &per_cpu(ingenic_cevt_csd, timer->cpu);
+ csd->info = (void *) &timer->cevt;
+ csd->func = ingenic_per_cpu_event_handler;
+ smp_call_function_single_async(timer->cpu, csd);
+ }
return IRQ_HANDLED;
}
@@ -105,64 +138,66 @@ static struct clk * __init ingenic_tcu_get_clock(struct device_node *np, int id)
return of_clk_get_from_provider(&args);
}
-static int __init ingenic_tcu_timer_init(struct device_node *np,
- struct ingenic_tcu *tcu)
+static int ingenic_tcu_setup_cevt(unsigned int cpu)
{
- unsigned int timer_virq, channel = tcu->timer_channel;
+ struct ingenic_tcu *tcu = ingenic_tcu;
+ struct ingenic_tcu_timer *timer = &tcu->timers[cpu];
+ unsigned int timer_virq;
struct irq_domain *domain;
unsigned long rate;
int err;
- tcu->timer_clk = ingenic_tcu_get_clock(np, channel);
- if (IS_ERR(tcu->timer_clk))
- return PTR_ERR(tcu->timer_clk);
+ timer->clk = ingenic_tcu_get_clock(tcu->np, timer->channel);
+ if (IS_ERR(timer->clk))
+ return PTR_ERR(timer->clk);
- err = clk_prepare_enable(tcu->timer_clk);
+ err = clk_prepare_enable(timer->clk);
if (err)
goto err_clk_put;
- rate = clk_get_rate(tcu->timer_clk);
+ rate = clk_get_rate(timer->clk);
if (!rate) {
err = -EINVAL;
goto err_clk_disable;
}
- domain = irq_find_host(np);
+ domain = irq_find_host(tcu->np);
if (!domain) {
err = -ENODEV;
goto err_clk_disable;
}
- timer_virq = irq_create_mapping(domain, channel);
+ timer_virq = irq_create_mapping(domain, timer->channel);
if (!timer_virq) {
err = -EINVAL;
goto err_clk_disable;
}
- snprintf(tcu->name, sizeof(tcu->name), "TCU");
+ snprintf(timer->name, sizeof(timer->name), "TCU%u", timer->channel);
err = request_irq(timer_virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
- tcu->name, &tcu->cevt);
+ timer->name, timer);
if (err)
goto err_irq_dispose_mapping;
- tcu->cevt.cpumask = cpumask_of(smp_processor_id());
- tcu->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
- tcu->cevt.name = tcu->name;
- tcu->cevt.rating = 200;
- tcu->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
- tcu->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+ timer->cpu = smp_processor_id();
+ timer->cevt.cpumask = cpumask_of(smp_processor_id());
+ timer->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+ timer->cevt.name = timer->name;
+ timer->cevt.rating = 200;
+ timer->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+ timer->cevt.set_next_event = ingenic_tcu_cevt_set_next;
- clockevents_config_and_register(&tcu->cevt, rate, 10, 0xffff);
+ clockevents_config_and_register(&timer->cevt, rate, 10, 0xffff);
return 0;
err_irq_dispose_mapping:
irq_dispose_mapping(timer_virq);
err_clk_disable:
- clk_disable_unprepare(tcu->timer_clk);
+ clk_disable_unprepare(timer->clk);
err_clk_put:
- clk_put(tcu->timer_clk);
+ clk_put(timer->clk);
return err;
}
@@ -238,10 +273,12 @@ static int __init ingenic_tcu_init(struct device_node *np)
{
const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
const struct ingenic_soc_info *soc_info = id->data;
+ struct ingenic_tcu_timer *timer;
struct ingenic_tcu *tcu;
struct regmap *map;
+ unsigned int cpu;
+ int ret, last_bit = -1;
long rate;
- int ret;
of_node_clear_flag(np, OF_POPULATED);
@@ -249,17 +286,23 @@ static int __init ingenic_tcu_init(struct device_node *np)
if (IS_ERR(map))
return PTR_ERR(map);
- tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+ tcu = kzalloc(struct_size(tcu, timers, num_possible_cpus()),
+ GFP_KERNEL);
if (!tcu)
return -ENOMEM;
- /* Enable all TCU channels for PWM use by default except channels 0/1 */
- tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1, 2);
+ /*
+ * Enable all TCU channels for PWM use by default except channels 0/1,
+ * and channel 2 if target CPU is JZ4780/X2000 and SMP is selected.
+ */
+ tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1,
+ num_possible_cpus() + 1);
of_property_read_u32(np, "ingenic,pwm-channels-mask",
(u32 *)&tcu->pwm_channels_mask);
- /* Verify that we have at least two free channels */
- if (hweight8(tcu->pwm_channels_mask) > soc_info->num_channels - 2) {
+ /* Verify that we have at least num_possible_cpus() + 1 free channels */
+ if (hweight8(tcu->pwm_channels_mask) >
+ soc_info->num_channels - num_possible_cpus() + 1) {
pr_crit("%s: Invalid PWM channel mask: 0x%02lx\n", __func__,
tcu->pwm_channels_mask);
ret = -EINVAL;
@@ -267,13 +310,22 @@ static int __init ingenic_tcu_init(struct device_node *np)
}
tcu->map = map;
+ tcu->np = np;
ingenic_tcu = tcu;
- tcu->timer_channel = find_first_zero_bit(&tcu->pwm_channels_mask,
- soc_info->num_channels);
+ for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
+ timer = &tcu->timers[cpu];
+
+ timer->cpu = cpu;
+ timer->channel = find_next_zero_bit(&tcu->pwm_channels_mask,
+ soc_info->num_channels,
+ last_bit + 1);
+ last_bit = timer->channel;
+ }
+
tcu->cs_channel = find_next_zero_bit(&tcu->pwm_channels_mask,
soc_info->num_channels,
- tcu->timer_channel + 1);
+ last_bit + 1);
ret = ingenic_tcu_clocksource_init(np, tcu);
if (ret) {
@@ -281,9 +333,13 @@ static int __init ingenic_tcu_init(struct device_node *np)
goto err_free_ingenic_tcu;
}
- ret = ingenic_tcu_timer_init(np, tcu);
- if (ret)
+ /* Setup clock events on each CPU core */
+ ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "Ingenic XBurst: online",
+ ingenic_tcu_setup_cevt, NULL);
+ if (ret < 0) {
+ pr_crit("%s: Unable to start CPU timers: %d\n", __func__, ret);
goto err_tcu_clocksource_cleanup;
+ }
/* Register the sched_clock at the end as there's no way to undo it */
rate = clk_get_rate(tcu->cs_clk);
@@ -315,28 +371,38 @@ static int __init ingenic_tcu_probe(struct platform_device *pdev)
static int __maybe_unused ingenic_tcu_suspend(struct device *dev)
{
struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+ unsigned int cpu;
clk_disable(tcu->cs_clk);
- clk_disable(tcu->timer_clk);
+
+ for (cpu = 0; cpu < num_online_cpus(); cpu++)
+ clk_disable(tcu->timers[cpu].clk);
+
return 0;
}
static int __maybe_unused ingenic_tcu_resume(struct device *dev)
{
struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+ unsigned int cpu;
int ret;
- ret = clk_enable(tcu->timer_clk);
- if (ret)
- return ret;
+ for (cpu = 0; cpu < num_online_cpus(); cpu++) {
+ ret = clk_enable(tcu->timers[cpu].clk);
+ if (ret)
+ goto err_timer_clk_disable;
+ }
ret = clk_enable(tcu->cs_clk);
- if (ret) {
- clk_disable(tcu->timer_clk);
- return ret;
- }
+ if (ret)
+ goto err_timer_clk_disable;
return 0;
+
+err_timer_clk_disable:
+ for (; cpu > 0; cpu--)
+ clk_disable(tcu->timers[cpu - 1].clk);
+ return ret;
}
static const struct dev_pm_ops __maybe_unused ingenic_tcu_pm_ops = {
--
2.25.1
next prev parent reply other threads:[~2020-07-23 15:27 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-23 15:24 [GIT PULL] timer drives for v5.9 Daniel Lezcano
2020-07-23 15:26 ` [PATCH 01/16] dt-bindings: atmel-tcb: convert bindings to json-schema Daniel Lezcano
2020-07-23 15:26 ` [PATCH 02/16] dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible Daniel Lezcano
2020-07-23 15:26 ` [PATCH 03/16] ARM: dts: at91: sama5d2: add TCB GCLK Daniel Lezcano
2020-07-23 15:26 ` [PATCH 04/16] ARM: at91: add atmel tcb capabilities Daniel Lezcano
2020-07-23 15:26 ` [PATCH 05/16] clocksource/drivers/timer-atmel-tcb: Rework 32khz clock selection Daniel Lezcano
2020-07-23 15:26 ` [PATCH 06/16] clocksource/drivers/timer-atmel-tcb: Fill tcb_config Daniel Lezcano
2020-07-23 15:26 ` [PATCH 07/16] clocksource/drivers/timer-atmel-tcb: Stop using the 32kHz for clockevents Daniel Lezcano
2020-07-23 15:26 ` [PATCH 08/16] clocksource/drivers/timer-atmel-tcb: Allow selecting first divider Daniel Lezcano
2020-07-23 15:26 ` [PATCH 09/16] clocksource/drivers/timer-atmel-tcb: Add sama5d2 support Daniel Lezcano
2020-07-23 15:26 ` Daniel Lezcano [this message]
2020-07-23 15:26 ` [PATCH 11/16] clocksource/drivers/imx: Add support for i.MX TPM driver with ARM64 Daniel Lezcano
2020-07-23 15:26 ` [PATCH 12/16] clocksource/drivers/sh_cmt: Use "kHz" for kilohertz Daniel Lezcano
2020-07-23 15:26 ` [PATCH 13/16] clocksource/drivers/nomadik-mtu: Handle 32kHz clock Daniel Lezcano
2020-07-23 15:26 ` [PATCH 14/16] clocksource/drivers: Replace HTTP links with HTTPS ones Daniel Lezcano
2020-07-23 15:26 ` [PATCH 15/16] dt-bindings: timer: Add Ingenic X1000 OST bindings Daniel Lezcano
2020-07-23 15:26 ` [PATCH 16/16] clocksource/drivers/ingenic: Add support for the Ingenic X1000 OST Daniel Lezcano
2020-07-27 14:04 ` [PATCH 01/16] dt-bindings: atmel-tcb: convert bindings to json-schema Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200723152639.639771-10-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=hns@goldelico.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paul@boddie.org.uk \
--cc=paul@crapouillou.net \
--cc=tglx@linutronix.de \
--cc=zhouyanjie@wanyeetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).