From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: manivannan.sadhasivam@linaro.org
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
Bhaumik Bhatt <bbhatt@codeaurora.org>
Subject: [PATCH v5 09/10] bus: mhi: core: Read and save device hardware information from BHI
Date: Thu, 23 Jul 2020 15:36:41 -0700 [thread overview]
Message-ID: <1595543802-17859-10-git-send-email-bbhatt@codeaurora.org> (raw)
In-Reply-To: <1595543802-17859-1-git-send-email-bbhatt@codeaurora.org>
Device hardware specific information such as serial number and the OEM
PK hash can be read using BHI and saved on host to identify the
endpoint.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/bus/mhi/core/boot.c | 17 ++++++++++++++++-
include/linux/mhi.h | 6 ++++++
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 0b38014..24422f5 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -392,13 +392,28 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
void *buf;
dma_addr_t dma_addr;
size_t size;
- int ret;
+ int i, ret;
if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
dev_err(dev, "Device MHI is not in valid state\n");
return;
}
+ /* save hardware info from BHI */
+ ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_SERIALNU,
+ &mhi_cntrl->serial_number);
+ if (ret)
+ dev_err(dev, "Could not capture serial number via BHI\n");
+
+ for (i = 0; i < ARRAY_SIZE(mhi_cntrl->oem_pk_hash); i++) {
+ ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_OEMPKHASH(i),
+ &mhi_cntrl->oem_pk_hash[i]);
+ if (ret) {
+ dev_err(dev, "Could not capture OEM PK HASH via BHI\n");
+ break;
+ }
+ }
+
/* If device is in pass through, do reset to ready state transition */
if (mhi_cntrl->ee == MHI_EE_PTHRU)
goto fw_load_ee_pthru;
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index b1e8b4f..dad6246 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -16,6 +16,8 @@
#include <linux/wait.h>
#include <linux/workqueue.h>
+#define MHI_MAX_OEM_PK_HASH_SEGMENTS 16
+
struct mhi_chan;
struct mhi_event;
struct mhi_ctxt;
@@ -315,6 +317,8 @@ struct mhi_controller_config {
* @device_number: MHI controller device number
* @major_version: MHI controller major revision number
* @minor_version: MHI controller minor revision number
+ * @serial_number: MHI controller serial number obtained from BHI
+ * @oem_pk_hash: MHI controller OEM PK Hash obtained from BHI
* @mhi_event: MHI event ring configurations table
* @mhi_cmd: MHI command ring configurations table
* @mhi_ctxt: MHI device context, shared memory between host and device
@@ -394,6 +398,8 @@ struct mhi_controller {
u32 device_number;
u32 major_version;
u32 minor_version;
+ u32 serial_number;
+ u32 oem_pk_hash[MHI_MAX_OEM_PK_HASH_SEGMENTS];
struct mhi_event *mhi_event;
struct mhi_cmd *mhi_cmd;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-07-23 22:37 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-23 22:36 [PATCH v5 00/10] Introduce features and debugfs/sysfs entries for MHI Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 01/10] bus: mhi: core: Remove double occurrence for mhi_ctrl_ev_task() declaration Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 02/10] bus: mhi: core: Abort suspends due to outgoing pending packets Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 03/10] bus: mhi: core: Use helper API to trigger a non-blocking host resume Bhaumik Bhatt
2020-07-24 6:09 ` Manivannan Sadhasivam
2020-07-23 22:36 ` [PATCH v5 04/10] bus: mhi: core: Trigger host resume if suspended during mhi_device_get() Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 05/10] bus: mhi: core: Use generic name field for an MHI device Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 06/10] bus: mhi: core: Introduce helper function to check device state Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 07/10] bus: mhi: core: Introduce debugfs entries for MHI Bhaumik Bhatt
2020-07-24 4:11 ` kernel test robot
2020-07-24 23:46 ` kernel test robot
2020-07-23 22:36 ` [PATCH v5 08/10] bus: mhi: core: Use counters to track MHI device state transitions Bhaumik Bhatt
2020-07-24 5:24 ` Manivannan Sadhasivam
2020-07-23 22:36 ` Bhaumik Bhatt [this message]
2020-07-23 22:36 ` [PATCH v5 10/10] bus: mhi: core: Introduce sysfs entries for MHI Bhaumik Bhatt
2020-07-24 5:42 ` Manivannan Sadhasivam
2020-07-28 0:29 ` bbhatt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1595543802-17859-10-git-send-email-bbhatt@codeaurora.org \
--to=bbhatt@codeaurora.org \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).