From: Gilad Ben-Yossef <gilad@benyossef.com>
To: Herbert Xu <herbert@gondor.apana.org.au>,
"David S. Miller" <davem@davemloft.net>
Cc: Ofir Drang <ofir.drang@arm.com>,
linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] crypto: ccree: remove data unit size support
Date: Wed, 5 Aug 2020 09:23:00 +0300 [thread overview]
Message-ID: <20200805062302.16569-2-gilad@benyossef.com> (raw)
In-Reply-To: <20200805062302.16569-1-gilad@benyossef.com>
Remove the implementaion of automatic advancement of sector size in IV for
storage ciphers as its use is not supproted by the kernel.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
---
drivers/crypto/ccree/cc_cipher.c | 233 +------------------------------
drivers/crypto/ccree/cc_driver.h | 1 -
2 files changed, 1 insertion(+), 233 deletions(-)
diff --git a/drivers/crypto/ccree/cc_cipher.c b/drivers/crypto/ccree/cc_cipher.c
index 8e446a097086..0a74f3808510 100644
--- a/drivers/crypto/ccree/cc_cipher.c
+++ b/drivers/crypto/ccree/cc_cipher.c
@@ -645,16 +645,8 @@ static void cc_setup_xex_state_desc(struct crypto_tfm *tfm,
dma_addr_t key_dma_addr = ctx_p->user.key_dma_addr;
unsigned int key_len = (ctx_p->keylen / 2);
dma_addr_t iv_dma_addr = req_ctx->gen_ctx.iv_dma_addr;
- unsigned int du_size = nbytes;
unsigned int key_offset = key_len;
- struct cc_crypto_alg *cc_alg =
- container_of(tfm->__crt_alg, struct cc_crypto_alg,
- skcipher_alg.base);
-
- if (cc_alg->data_unit)
- du_size = cc_alg->data_unit;
-
switch (cipher_mode) {
case DRV_CIPHER_ECB:
break;
@@ -682,7 +674,7 @@ static void cc_setup_xex_state_desc(struct crypto_tfm *tfm,
(key_dma_addr + key_offset),
key_len, NS_BIT);
}
- set_xex_data_unit_size(&desc[*seq_size], du_size);
+ set_xex_data_unit_size(&desc[*seq_size], nbytes);
set_flow_mode(&desc[*seq_size], S_DIN_to_AES2);
set_key_size_aes(&desc[*seq_size], key_len);
set_setup_mode(&desc[*seq_size], SETUP_LOAD_XEX_KEY);
@@ -1059,44 +1051,6 @@ static const struct cc_alg_template skcipher_algs[] = {
.std_body = CC_STD_NIST,
.sec_func = true,
},
- {
- .name = "xts512(paes)",
- .driver_name = "xts-paes-du512-ccree",
- .blocksize = 1,
- .template_skcipher = {
- .setkey = cc_cipher_sethkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = CC_HW_KEY_SIZE,
- .max_keysize = CC_HW_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_XTS,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 512,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- .sec_func = true,
- },
- {
- .name = "xts4096(paes)",
- .driver_name = "xts-paes-du4096-ccree",
- .blocksize = 1,
- .template_skcipher = {
- .setkey = cc_cipher_sethkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = CC_HW_KEY_SIZE,
- .max_keysize = CC_HW_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_XTS,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 4096,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- .sec_func = true,
- },
{
.name = "essiv(cbc(paes),sha256)",
.driver_name = "essiv-paes-ccree",
@@ -1115,44 +1069,6 @@ static const struct cc_alg_template skcipher_algs[] = {
.std_body = CC_STD_NIST,
.sec_func = true,
},
- {
- .name = "essiv512(cbc(paes),sha256)",
- .driver_name = "essiv-paes-du512-ccree",
- .blocksize = AES_BLOCK_SIZE,
- .template_skcipher = {
- .setkey = cc_cipher_sethkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = CC_HW_KEY_SIZE,
- .max_keysize = CC_HW_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_ESSIV,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 512,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- .sec_func = true,
- },
- {
- .name = "essiv4096(cbc(paes),sha256)",
- .driver_name = "essiv-paes-du4096-ccree",
- .blocksize = AES_BLOCK_SIZE,
- .template_skcipher = {
- .setkey = cc_cipher_sethkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = CC_HW_KEY_SIZE,
- .max_keysize = CC_HW_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_ESSIV,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 4096,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- .sec_func = true,
- },
{
.name = "bitlocker(paes)",
.driver_name = "bitlocker-paes-ccree",
@@ -1171,44 +1087,6 @@ static const struct cc_alg_template skcipher_algs[] = {
.std_body = CC_STD_NIST,
.sec_func = true,
},
- {
- .name = "bitlocker512(paes)",
- .driver_name = "bitlocker-paes-du512-ccree",
- .blocksize = AES_BLOCK_SIZE,
- .template_skcipher = {
- .setkey = cc_cipher_sethkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = CC_HW_KEY_SIZE,
- .max_keysize = CC_HW_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_BITLOCKER,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 512,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- .sec_func = true,
- },
- {
- .name = "bitlocker4096(paes)",
- .driver_name = "bitlocker-paes-du4096-ccree",
- .blocksize = AES_BLOCK_SIZE,
- .template_skcipher = {
- .setkey = cc_cipher_sethkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = CC_HW_KEY_SIZE,
- .max_keysize = CC_HW_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_BITLOCKER,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 4096,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- .sec_func = true,
- },
{
.name = "ecb(paes)",
.driver_name = "ecb-paes-ccree",
@@ -1320,42 +1198,6 @@ static const struct cc_alg_template skcipher_algs[] = {
.min_hw_rev = CC_HW_REV_630,
.std_body = CC_STD_NIST,
},
- {
- .name = "xts512(aes)",
- .driver_name = "xts-aes-du512-ccree",
- .blocksize = 1,
- .template_skcipher = {
- .setkey = cc_cipher_setkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = AES_MIN_KEY_SIZE * 2,
- .max_keysize = AES_MAX_KEY_SIZE * 2,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_XTS,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 512,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- },
- {
- .name = "xts4096(aes)",
- .driver_name = "xts-aes-du4096-ccree",
- .blocksize = 1,
- .template_skcipher = {
- .setkey = cc_cipher_setkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = AES_MIN_KEY_SIZE * 2,
- .max_keysize = AES_MAX_KEY_SIZE * 2,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_XTS,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 4096,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- },
{
.name = "essiv(cbc(aes),sha256)",
.driver_name = "essiv-aes-ccree",
@@ -1373,42 +1215,6 @@ static const struct cc_alg_template skcipher_algs[] = {
.min_hw_rev = CC_HW_REV_712,
.std_body = CC_STD_NIST,
},
- {
- .name = "essiv512(cbc(aes),sha256)",
- .driver_name = "essiv-aes-du512-ccree",
- .blocksize = AES_BLOCK_SIZE,
- .template_skcipher = {
- .setkey = cc_cipher_setkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_ESSIV,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 512,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- },
- {
- .name = "essiv4096(cbc(aes),sha256)",
- .driver_name = "essiv-aes-du4096-ccree",
- .blocksize = AES_BLOCK_SIZE,
- .template_skcipher = {
- .setkey = cc_cipher_setkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_ESSIV,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 4096,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- },
{
.name = "bitlocker(aes)",
.driver_name = "bitlocker-aes-ccree",
@@ -1426,42 +1232,6 @@ static const struct cc_alg_template skcipher_algs[] = {
.min_hw_rev = CC_HW_REV_712,
.std_body = CC_STD_NIST,
},
- {
- .name = "bitlocker512(aes)",
- .driver_name = "bitlocker-aes-du512-ccree",
- .blocksize = AES_BLOCK_SIZE,
- .template_skcipher = {
- .setkey = cc_cipher_setkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = AES_MIN_KEY_SIZE * 2,
- .max_keysize = AES_MAX_KEY_SIZE * 2,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_BITLOCKER,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 512,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- },
- {
- .name = "bitlocker4096(aes)",
- .driver_name = "bitlocker-aes-du4096-ccree",
- .blocksize = AES_BLOCK_SIZE,
- .template_skcipher = {
- .setkey = cc_cipher_setkey,
- .encrypt = cc_cipher_encrypt,
- .decrypt = cc_cipher_decrypt,
- .min_keysize = AES_MIN_KEY_SIZE * 2,
- .max_keysize = AES_MAX_KEY_SIZE * 2,
- .ivsize = AES_BLOCK_SIZE,
- },
- .cipher_mode = DRV_CIPHER_BITLOCKER,
- .flow_mode = S_DIN_to_AES,
- .data_unit = 4096,
- .min_hw_rev = CC_HW_REV_712,
- .std_body = CC_STD_NIST,
- },
{
.name = "ecb(aes)",
.driver_name = "ecb-aes-ccree",
@@ -1733,7 +1503,6 @@ static struct cc_crypto_alg *cc_create_alg(const struct cc_alg_template *tmpl,
t_alg->cipher_mode = tmpl->cipher_mode;
t_alg->flow_mode = tmpl->flow_mode;
- t_alg->data_unit = tmpl->data_unit;
return t_alg;
}
diff --git a/drivers/crypto/ccree/cc_driver.h b/drivers/crypto/ccree/cc_driver.h
index c78275ce4761..3b9ea3fcd42d 100644
--- a/drivers/crypto/ccree/cc_driver.h
+++ b/drivers/crypto/ccree/cc_driver.h
@@ -169,7 +169,6 @@ struct cc_crypto_alg {
int cipher_mode;
int flow_mode; /* Note: currently, refers to the cipher mode only. */
int auth_mode;
- unsigned int data_unit;
struct cc_drvdata *drvdata;
struct skcipher_alg skcipher_alg;
struct aead_alg aead_alg;
--
2.27.0
next prev parent reply other threads:[~2020-08-05 6:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-05 6:22 [PATCH 0/2] Remove none supported ciphers Gilad Ben-Yossef
2020-08-05 6:23 ` Gilad Ben-Yossef [this message]
2020-08-05 6:23 ` [PATCH 2/2] crypto: ccree: remove bitlocker cipher Gilad Ben-Yossef
2020-08-21 7:57 ` [PATCH 0/2] Remove none supported ciphers Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200805062302.16569-2-gilad@benyossef.com \
--to=gilad@benyossef.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ofir.drang@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).