From: Mike Looijmans <mike.looijmans@topic.nl>
To: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, vincent.whitchurch@axis.com,
balbi@kernel.org, gregkh@linuxfoundation.org,
lgirdwood@gmail.com, Mike Looijmans <mike.looijmans@topic.nl>
Subject: [PATCH v4] usb: dwc3: Add support for VBUS power control
Date: Wed, 5 Aug 2020 08:17:44 +0200 [thread overview]
Message-ID: <20200805061744.20404-1-mike.looijmans@topic.nl> (raw)
Support VBUS power control using regulator framework. Enables the regulator
while the port is in host mode.
The "vbus-supply" property can be provided using a usb-connector child node
and standard devicetree bindings.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
v2: Add missing devm_regulator_get call which got lost during rebase
v3: Remove devicetree binding, use standard usb-connector
Fix probe fail when vbus-supply is not present
v4: Use devm_regulator_get (without "optional")
drivers/usb/dwc3/core.c | 34 ++++++++++++++++++++++++++--------
drivers/usb/dwc3/core.h | 4 ++++
drivers/usb/dwc3/drd.c | 6 ++----
3 files changed, 32 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index edc17155cb2b..abfd043bae21 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -25,6 +25,7 @@
#include <linux/of.h>
#include <linux/acpi.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/usb/ch9.h>
@@ -112,6 +113,23 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
dwc->current_dr_role = mode;
}
+void dwc3_set_vbus(struct dwc3 *dwc, bool enable)
+{
+ int ret;
+
+ if (enable != dwc->vbus_reg_enabled) {
+ if (enable)
+ ret = regulator_enable(dwc->vbus_reg);
+ else
+ ret = regulator_disable(dwc->vbus_reg);
+ if (!ret)
+ dwc->vbus_reg_enabled = enable;
+ }
+
+ if (dwc->usb2_phy)
+ otg_set_vbus(dwc->usb2_phy->otg, enable);
+}
+
static void __dwc3_set_mode(struct work_struct *work)
{
struct dwc3 *dwc = work_to_dwc(work);
@@ -164,8 +182,7 @@ static void __dwc3_set_mode(struct work_struct *work)
if (ret) {
dev_err(dwc->dev, "failed to initialize host\n");
} else {
- if (dwc->usb2_phy)
- otg_set_vbus(dwc->usb2_phy->otg, true);
+ dwc3_set_vbus(dwc, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
}
@@ -173,8 +190,7 @@ static void __dwc3_set_mode(struct work_struct *work)
case DWC3_GCTL_PRTCAP_DEVICE:
dwc3_event_buffers_setup(dwc);
- if (dwc->usb2_phy)
- otg_set_vbus(dwc->usb2_phy->otg, false);
+ dwc3_set_vbus(dwc, false);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
@@ -1183,8 +1199,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
case USB_DR_MODE_PERIPHERAL:
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
- if (dwc->usb2_phy)
- otg_set_vbus(dwc->usb2_phy->otg, false);
+ dwc3_set_vbus(dwc, false);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
@@ -1198,8 +1213,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
case USB_DR_MODE_HOST:
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
- if (dwc->usb2_phy)
- otg_set_vbus(dwc->usb2_phy->otg, true);
+ dwc3_set_vbus(dwc, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
@@ -1470,6 +1484,10 @@ static int dwc3_probe(struct platform_device *pdev)
dwc3_get_properties(dwc);
+ dwc->vbus_reg = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(dwc->vbus_reg))
+ return PTR_ERR(dwc->vbus_reg);
+
dwc->reset = devm_reset_control_array_get(dev, true, true);
if (IS_ERR(dwc->reset))
return PTR_ERR(dwc->reset);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 4c171a8e215f..cee2574d7bf4 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1085,6 +1085,9 @@ struct dwc3 {
bool phys_ready;
+ struct regulator *vbus_reg;
+ bool vbus_reg_enabled;
+
struct ulpi *ulpi;
bool ulpi_ready;
@@ -1397,6 +1400,7 @@ struct dwc3_gadget_ep_cmd_params {
/* prototypes */
void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode);
+void dwc3_set_vbus(struct dwc3 *dwc, bool enable);
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type);
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 7db1ffc92bbd..45fdec2d128d 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -384,8 +384,7 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
if (ret) {
dev_err(dwc->dev, "failed to initialize host\n");
} else {
- if (dwc->usb2_phy)
- otg_set_vbus(dwc->usb2_phy->otg, true);
+ dwc3_set_vbus(dwc, true);
if (dwc->usb2_generic_phy)
phy_set_mode(dwc->usb2_generic_phy,
PHY_MODE_USB_HOST);
@@ -398,8 +397,7 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
dwc3_event_buffers_setup(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
- if (dwc->usb2_phy)
- otg_set_vbus(dwc->usb2_phy->otg, false);
+ dwc3_set_vbus(dwc, false);
if (dwc->usb2_generic_phy)
phy_set_mode(dwc->usb2_generic_phy,
PHY_MODE_USB_DEVICE);
--
2.17.1
next reply other threads:[~2020-08-05 6:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-05 6:17 Mike Looijmans [this message]
2021-07-20 4:05 [PATCH v4] usb: dwc3: Add support for VBUS power control Yassine Oudjana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200805061744.20404-1-mike.looijmans@topic.nl \
--to=mike.looijmans@topic.nl \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=vincent.whitchurch@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).