linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-amarula <linux-amarula@amarulasolutions.com>,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v4 3/4] arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
Date: Fri,  7 Aug 2020 15:18:25 +0530	[thread overview]
Message-ID: <20200807094826.12019-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20200807094826.12019-1-jagan@amarulasolutions.com>

RockPI 4B has AP6256 Wifi/BT, so enable them in 4B dts
instead of enable in common dtsi.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4, v3:
- none
Changes for v2:
- update commit message
- add radxa,rockpi4b

 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../boot/dts/rockchip/rk3399-rock-pi-4.dtsi   | 23 ----------
 .../boot/dts/rockchip/rk3399-rock-pi-4b.dts   | 42 +++++++++++++++++++
 3 files changed, 43 insertions(+), 23 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 42f9e1861461..8832d05c2571 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index e163f438f836..678a336010bf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -584,17 +584,6 @@ &sdio0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
 };
 
 &sdmmc {
@@ -663,18 +652,6 @@ u2phy1_host: host-port {
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-	};
 };
 
 &uart2 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
new file mode 100644
index 000000000000..f0055ce2fda0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4B";
+	compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
-- 
2.25.1


  parent reply	other threads:[~2020-08-07  9:48 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-07  9:48 [PATCH v4 1/4] dt-bindings: arm: rockchip: Update ROCKPi 4 binding Jagan Teki
2020-08-07  9:48 ` [PATCH v4 2/4] arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts Jagan Teki
2020-08-07  9:48 ` Jagan Teki [this message]
2020-08-07  9:48 ` [PATCH v4 4/4] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support Jagan Teki
2020-08-17 22:12 ` [PATCH v4 1/4] dt-bindings: arm: rockchip: Update ROCKPi 4 binding Rob Herring
2020-08-30 19:42 ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200807094826.12019-3-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=michael@amarulasolutions.com \
    --cc=robh+dt@kernel.org \
    --cc=sunil@amarulasolutions.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).