From: Jagan Teki <jagan@amarulasolutions.com>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-amarula <linux-amarula@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v4 4/4] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
Date: Fri, 7 Aug 2020 15:18:26 +0530 [thread overview]
Message-ID: <20200807094826.12019-4-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20200807094826.12019-1-jagan@amarulasolutions.com>
Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled
GPIO pin change compared to 4B, 4C.
So, add or enable difference nodes/properties in 4C dts
by including common dtsi.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4, v3:
- none
Changes for v2:
- update commit message
- add radxa,rockpi4c
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399-rock-pi-4c.dts | 51 +++++++++++++++++++
2 files changed, 52 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 8832d05c2571..02cdb3c4a6c1 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
new file mode 100644
index 000000000000..4c7ebb1c5d2d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi 4C";
+ compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ };
+};
+
+&vcc5v0_host {
+ gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host_en {
+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+};
--
2.25.1
next prev parent reply other threads:[~2020-08-07 9:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-07 9:48 [PATCH v4 1/4] dt-bindings: arm: rockchip: Update ROCKPi 4 binding Jagan Teki
2020-08-07 9:48 ` [PATCH v4 2/4] arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts Jagan Teki
2020-08-07 9:48 ` [PATCH v4 3/4] arm64: dts: rockchip: Add Radxa ROCK Pi 4B support Jagan Teki
2020-08-07 9:48 ` Jagan Teki [this message]
2020-08-17 22:12 ` [PATCH v4 1/4] dt-bindings: arm: rockchip: Update ROCKPi 4 binding Rob Herring
2020-08-30 19:42 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200807094826.12019-4-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael@amarulasolutions.com \
--cc=robh+dt@kernel.org \
--cc=sunil@amarulasolutions.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).