From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-mtd@lists.infradead.org,
Richard Weinberger <richard@nod.at>,
Tudor Ambarus <Tudor.Ambarus@microchip.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
linux-kernel@vger.kernel.org
Subject: [GIT PULL] mtd: Changes for 5.9
Date: Sun, 9 Aug 2020 00:34:53 +0200 [thread overview]
Message-ID: <20200809003453.79673eb3@xps13> (raw)
Hello Linus,
This is the MTD PR for 5.9.
Thanks,
Miquèl
The following changes since commit dcb7fd82c75ee2d6e6f9d8cc71c52519ed52e258:
Linux 5.8-rc4 (2020-07-05 16:20:22 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/mtd/for-5.9
for you to fetch changes up to 6a1380271b75e0d9a961e192e56b733fedf7a23a:
Merge tag 'nand/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next (2020-08-07 08:54:16 +0200)
----------------------------------------------------------------
MTD core changes:
* Spelling
* http to https updates
NAND core changes:
* Drop useless 'depends on' in Kconfig
* Add an extra level in the Kconfig hierarchy
* Trivial spellings
* Dynamic allocation of the interface configurations
* Dropping the default ONFI timing mode
* Various cleanup (types, structures, naming, comments)
* Hide the chip->data_interface indirection
* Add the generic rb-gpios property
* Add the ->choose_interface_config() hook
* Introduce nand_choose_best_sdr_timings()
* Use default values for tPROG_max and tBERS_max
* Avoid redefining tR_max and tCCS_min
* Add a helper to find the closest ONFI mode
* bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
* fsl-upm: Deprecation of specific DT properties
* fsl_upm: Driver rework and cleanup in favor of ->exec_op()
* Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
* brcmnand: ECC error handling on EDU transfers
* brcmnand: Don't default to EDU transfers
* qcom: Set BAM mode only if not set already
* qcom: Avoid write to unavailable register
* gpio: Driver rework in favor of ->exec_op()
* tango: ->exec_op() conversion
* mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
* toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
* toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
* toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
* hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
SPI NOR core changes:
* Disable Quad Mode in spi_nor_restore().
* Don't abort BFPT parsing when QER reserved value is used.
* Add support/update capabilities for few flashes.
* Drop s70fl01gs flash: it does not support RDSR(05h) which
is critical for erase/write.
* Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts
during the release cycle.
SPI NOR controller drivers changes:
* Move the cadence-quadspi driver to spi-mem. The series was
taken through the SPI tree. Merge it also in spi-nor/next
to avoid conflicts during the release cycle.
* intel-spi:
- Add new PCI IDs.
- Ignore the Write Disable command, the controller doesn't
support it.
- Fix performance regression.
----------------------------------------------------------------
Alexander A. Klimov (3):
mtd: hyperbus: Replace HTTP links with HTTPS ones
mtd: Replace HTTP links with HTTPS ones
mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
Alexander Sverdlin (1):
mtd: spi-nor: intel-spi: Simulate WRDI command
Boris Brezillon (16):
mtd: rawnand: mtk: Convert the driver to exec_op()
mtd: rawnand: tango: Convert the driver to exec_op()
dt-bindings: mtd: nand: Document the generic rb-gpios property
mtd: rawnand: fsl_upm: Remove unused mtd var
mtd: rawnand: fsl_upm: Get rid of the unused fsl_upm_nand.parts field
mtd: rawnand: fsl_upm: Allocate the fsl_upm_nand object using devm_kzalloc()
mtd: rawnand: fsl_upm: Use devm_kasprintf() to allocate the MTD name
mtd: rawnand: fsl_upm: Use platform_get_resource() + devm_ioremap_resource()
mtd: rawnand: fsl_upm: Use gpio descriptors
mtd: rawnand: fsl_upm: Inherit from nand_controller
mtd: rawnand: fsl_upm: Implement exec_op()
mtd: rawnand: fsl_upm: Get rid of the legacy interface implementation
mtd: rawnand: gpio: Inherit from nand_controller
mtd: rawnand: gpio: Implement exec_op()
mtd: rawnand: gpio: Get rid of the legacy interface implementation
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
Christophe Kerello (6):
mtd: rawnand: stm32_fmc2: do not display errors if the driver is deferred
dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
mtd: rawnand: stm32_fmc2: use regmap APIs
mtd: rawnand: stm32_fmc2: get resources from parent node
Dan Carpenter (1):
mtd: rawnand: ingenic: cleanup ARRAY_SIZE() vs sizeof() use
David Clear (2):
mtd: spi-nor: macronix: Add support for mx66u2g45g
mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
Frieder Schrempf (1):
mtd: spi-nor: macronix: Add support for MX25R1635F
Kamal Dasu (2):
mtd: rawnand: brcmnand: Don't default to edu transfer
mtd: rawnand: brcmnand: ECC error handling on EDU transfers
Kieran Bingham (1):
mtd: rawnand: trivial spelling
Luis Alberto Herrera (1):
mtd: revert "spi-nor: intel: provide a range for poll_timout"
Mika Westerberg (2):
mtd: spi-nor: intel-spi: Add support for Intel Emmitsburg SPI serial flash
mtd: spi-nor: intel-spi: Add support for Intel Tiger Lake-H SPI serial flash
Miquel Raynal (31):
mtd: nand: Move nand_device forward declaration to the top
mtd: nand: Add an extra level in the Kconfig hierarchy
mtd: nand: Drop useless 'depends on' in Kconfig
mtd: nand: Rename a core structure
mtd: rawnand: Use unsigned types for nand_chip unsigned values
mtd: rawnand: Only use u8 instead of uint8_t in nand_chip structure
mtd: rawnand: Create a nand_chip operations structure
mtd: rawnand: Rename the manufacturer structure
mtd: rawnand: Declare the nand_manufacturer structure out of nand_chip
mtd: rawnand: Reorganize the nand_chip structure
mtd: rawnand: Compare the actual timing values
mtd: rawnand: Use the data interface mode entry when relevant
mtd: rawnand: Rename nand_has_setup_data_iface()
mtd: rawnand: Fix nand_setup_data_interface() description
mtd: rawnand: Rename nand_init_data_interface()
mtd: rawnand: timings: Update onfi_fill_data_interface() kernel doc
mtd: rawnand: timings: Provide onfi_fill_data_interface() with a data interface
mtd: rawnand: timings: onfi_fill_data_interface timing mode is unsigned
mtd: rawnand: timings: Add a helper to find the closest ONFI mode
mtd: rawnand: timings: Avoid redefining tR_max and tCCS_min
mtd: rawnand: timings: Use default values for tPROG_max and tBERS_max
mtd: rawnand: Hide the chip->data_interface indirection
mtd: rawnand: s/data_interface/interface_config/
mtd: rawnand: timings: Make onfi_fill_interface_config() a void helper
mtd: rawnand: Introduce nand_choose_best_sdr_timings()
mtd: rawnand: Add the ->choose_interface_config() hook
mtd: rawnand: toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
mtd: rawnand: toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
mtd: rawnand: hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
mtd: rawnand: Get rid of the default ONFI timing mode
mtd: rawnand: Allocate the interface configurations dynamically
Pratyush Yadav (5):
mtd: spi-nor: sfdp: do not make invalid quad enable fatal
spi: spi-mem: allow specifying whether an op is DTR or not
spi: spi-mem: allow specifying a command's extension
spi: atmel-quadspi: reject DTR ops
spi: spi-mtk-nor: reject DTR ops
Ramuthevar Vadivel Murugan (2):
mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
spi: Move cadence-quadspi driver to drivers/spi/
Randy Dunlap (2):
MTD: mtd-abi.h: drop a duplicated word
MTD: pfow.h: drop a duplicated word
Rayagonda Kokatanur (1):
mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
Richard Weinberger (2):
Merge tag 'spi-nor/for-5.9' of https://git.kernel.org/.../mtd/linux into mtd/next
Merge tag 'nand/for-5.9' of git://git.kernel.org/.../mtd/linux into mtd/next
Rickard x Andersson (1):
mtd: rawnand: toshiba: Choose the interface configuration for TH58NVG2S3HBAI4
Sivaprakash Murugesan (2):
mtd: rawnand: qcom: avoid write to unavailable register
mtd: rawnand: qcom: set BAM mode only if not set already
Sven Van Asbroeck (1):
mtd: spi-nor: winbond: Add support for w25q64jvm
Takahiro Kuwano (1):
mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
Tudor Ambarus (2):
Merge tag 'cadence-mtd-spi-move' into spi-nor/next
Merge tag 'spi-mem-dtr' into spi-nor/next
Vignesh Raghavendra (6):
mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry
mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure
mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines
mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel
mtd: spi-nor: cadence-quadspi: Drop redundant WREN in erase path
Yicong Yang (2):
mtd: spi-nor: Add capability to disable flash quad mode
mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
Álvaro Fernández Rojas (1):
mtd: parsers: bcm63xx: simplify CFE detection
Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml | 252 ++++++++++++++++++
Documentation/devicetree/bindings/mtd/davinci-nand.txt | 4 +-
Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt | 10 +-
Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +
Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml | 83 ++++--
drivers/memory/Kconfig | 10 +
drivers/memory/Makefile | 1 +
drivers/memory/stm32-fmc2-ebi.c | 1206 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/mtd/chips/Kconfig | 2 +-
drivers/mtd/hyperbus/hbmc-am654.c | 2 +-
drivers/mtd/hyperbus/hyperbus-core.c | 2 +-
drivers/mtd/maps/Kconfig | 2 +-
drivers/mtd/maps/sc520cdp.c | 2 +-
drivers/mtd/nand/Kconfig | 5 +
drivers/mtd/nand/onenand/Kconfig | 1 -
drivers/mtd/nand/raw/Kconfig | 2 +-
drivers/mtd/nand/raw/ams-delta.c | 6 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 6 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 34 +--
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 31 ++-
drivers/mtd/nand/raw/cadence-nand-controller.c | 6 +-
drivers/mtd/nand/raw/denali.c | 8 +-
drivers/mtd/nand/raw/fsl_upm.c | 311 ++++++++--------------
drivers/mtd/nand/raw/fsmc_nand.c | 6 +-
drivers/mtd/nand/raw/gpio.c | 112 ++++++--
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 6 +-
drivers/mtd/nand/raw/ingenic/jz4740_ecc.c | 4 +-
drivers/mtd/nand/raw/internals.h | 23 +-
drivers/mtd/nand/raw/marvell_nand.c | 18 +-
drivers/mtd/nand/raw/meson_nand.c | 14 +-
drivers/mtd/nand/raw/mtk_nand.c | 122 +++++----
drivers/mtd/nand/raw/mxc_nand.c | 22 +-
drivers/mtd/nand/raw/mxic_nand.c | 6 +-
drivers/mtd/nand/raw/nand_base.c | 279 +++++++++++---------
drivers/mtd/nand/raw/nand_bbt.c | 2 +-
drivers/mtd/nand/raw/nand_hynix.c | 16 +-
drivers/mtd/nand/raw/nand_ids.c | 24 +-
drivers/mtd/nand/raw/nand_legacy.c | 7 +-
drivers/mtd/nand/raw/nand_macronix.c | 10 +-
drivers/mtd/nand/raw/nand_micron.c | 2 +-
drivers/mtd/nand/raw/nand_timings.c | 116 ++++++---
drivers/mtd/nand/raw/nand_toshiba.c | 72 +++++-
drivers/mtd/nand/raw/omap_elm.c | 2 +-
drivers/mtd/nand/raw/qcom_nandc.c | 18 +-
drivers/mtd/nand/raw/s3c2410.c | 6 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 319 ++++++++++++-----------
drivers/mtd/nand/raw/sunxi_nand.c | 6 +-
drivers/mtd/nand/raw/tango_nand.c | 149 ++++++-----
drivers/mtd/nand/raw/tegra_nand.c | 6 +-
drivers/mtd/parsers/bcm63xxpart.c | 32 +--
drivers/mtd/spi-nor/controllers/Kconfig | 11 -
drivers/mtd/spi-nor/controllers/Makefile | 1 -
drivers/mtd/spi-nor/controllers/intel-spi-pci.c | 2 +
drivers/mtd/spi-nor/controllers/intel-spi.c | 13 +-
drivers/mtd/spi-nor/core.c | 57 +++--
drivers/mtd/spi-nor/core.h | 10 +-
drivers/mtd/spi-nor/macronix.c | 6 +
drivers/mtd/spi-nor/micron-st.c | 4 +-
drivers/mtd/spi-nor/sfdp.c | 3 +-
drivers/mtd/spi-nor/spansion.c | 4 +-
drivers/mtd/spi-nor/winbond.c | 4 +-
drivers/spi/Kconfig | 11 +
drivers/spi/Makefile | 1 +
drivers/spi/atmel-quadspi.c | 6 +
drivers/{mtd/spi-nor/controllers/cadence-quadspi.c => spi/spi-cadence-quadspi.c} | 541 +++++++++++++++------------------------
drivers/spi/spi-mem.c | 16 +-
drivers/spi/spi-mtk-nor.c | 10 +-
drivers/spi/spi-mxic.c | 3 +-
drivers/spi/spi-zynq-qspi.c | 11 +-
include/linux/mtd/hyperbus.h | 2 +-
include/linux/mtd/nand.h | 12 +-
include/linux/mtd/pfow.h | 2 +-
include/linux/mtd/rawnand.h | 267 +++++++++----------
include/linux/mtd/spinand.h | 2 +-
include/linux/spi/spi-mem.h | 14 +-
include/uapi/mtd/mtd-abi.h | 2 +-
76 files changed, 3069 insertions(+), 1338 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
create mode 100644 drivers/memory/stm32-fmc2-ebi.c
rename drivers/{mtd/spi-nor/controllers/cadence-quadspi.c => spi/spi-cadence-quadspi.c} (74%)
next reply other threads:[~2020-08-08 22:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-08 22:34 Miquel Raynal [this message]
2020-08-09 19:47 ` [GIT PULL] mtd: Changes for 5.9 Linus Torvalds
2020-08-10 7:25 ` Miquel Raynal
2020-08-09 19:56 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200809003453.79673eb3@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=frieder.schrempf@kontron.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
--cc=torvalds@linux-foundation.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).