From: Oded Gabbay <oded.gabbay@gmail.com>
To: linux-kernel@vger.kernel.org, SW_Drivers@habana.ai
Cc: Ofir Bitton <obitton@habana.ai>
Subject: [PATCH 2/4] habanalabs: set clock gating according to mask
Date: Sun, 9 Aug 2020 14:53:35 +0300 [thread overview]
Message-ID: <20200809115337.23402-2-oded.gabbay@gmail.com> (raw)
In-Reply-To: <20200809115337.23402-1-oded.gabbay@gmail.com>
From: Ofir Bitton <obitton@habana.ai>
Once clock gating is set we enable clock gating according to mask,
we should also disable clock gating according to relevant bits.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
---
drivers/misc/habanalabs/gaudi/gaudi.c | 44 +++++++++++++--------------
1 file changed, 21 insertions(+), 23 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 08124873483f..7e0f9f64ffcb 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -2508,6 +2508,7 @@ static void gaudi_set_clock_gating(struct hl_device *hdev)
{
struct gaudi_device *gaudi = hdev->asic_specific;
u32 qman_offset;
+ bool enable;
int i;
/* In case we are during debug session, don't enable the clock gate
@@ -2517,46 +2518,43 @@ static void gaudi_set_clock_gating(struct hl_device *hdev)
return;
for (i = GAUDI_PCI_DMA_1, qman_offset = 0 ; i < GAUDI_HBM_DMA_1 ; i++) {
- if (!(hdev->clock_gating_mask &
- (BIT_ULL(gaudi_dma_assignment[i]))))
- continue;
+ enable = !!(hdev->clock_gating_mask &
+ (BIT_ULL(gaudi_dma_assignment[i])));
qman_offset = gaudi_dma_assignment[i] * DMA_QMAN_OFFSET;
- WREG32(mmDMA0_QM_CGM_CFG1 + qman_offset, QMAN_CGM1_PWR_GATE_EN);
+ WREG32(mmDMA0_QM_CGM_CFG1 + qman_offset,
+ enable ? QMAN_CGM1_PWR_GATE_EN : 0);
WREG32(mmDMA0_QM_CGM_CFG + qman_offset,
- QMAN_UPPER_CP_CGM_PWR_GATE_EN);
+ enable ? QMAN_UPPER_CP_CGM_PWR_GATE_EN : 0);
}
for (i = GAUDI_HBM_DMA_1 ; i < GAUDI_DMA_MAX ; i++) {
- if (!(hdev->clock_gating_mask &
- (BIT_ULL(gaudi_dma_assignment[i]))))
- continue;
+ enable = !!(hdev->clock_gating_mask &
+ (BIT_ULL(gaudi_dma_assignment[i])));
qman_offset = gaudi_dma_assignment[i] * DMA_QMAN_OFFSET;
- WREG32(mmDMA0_QM_CGM_CFG1 + qman_offset, QMAN_CGM1_PWR_GATE_EN);
+ WREG32(mmDMA0_QM_CGM_CFG1 + qman_offset,
+ enable ? QMAN_CGM1_PWR_GATE_EN : 0);
WREG32(mmDMA0_QM_CGM_CFG + qman_offset,
- QMAN_COMMON_CP_CGM_PWR_GATE_EN);
+ enable ? QMAN_COMMON_CP_CGM_PWR_GATE_EN : 0);
}
- if (hdev->clock_gating_mask & (BIT_ULL(GAUDI_ENGINE_ID_MME_0))) {
- WREG32(mmMME0_QM_CGM_CFG1, QMAN_CGM1_PWR_GATE_EN);
- WREG32(mmMME0_QM_CGM_CFG, QMAN_COMMON_CP_CGM_PWR_GATE_EN);
- }
+ enable = !!(hdev->clock_gating_mask & (BIT_ULL(GAUDI_ENGINE_ID_MME_0)));
+ WREG32(mmMME0_QM_CGM_CFG1, enable ? QMAN_CGM1_PWR_GATE_EN : 0);
+ WREG32(mmMME0_QM_CGM_CFG, enable ? QMAN_COMMON_CP_CGM_PWR_GATE_EN : 0);
- if (hdev->clock_gating_mask & (BIT_ULL(GAUDI_ENGINE_ID_MME_2))) {
- WREG32(mmMME2_QM_CGM_CFG1, QMAN_CGM1_PWR_GATE_EN);
- WREG32(mmMME2_QM_CGM_CFG, QMAN_COMMON_CP_CGM_PWR_GATE_EN);
- }
+ enable = !!(hdev->clock_gating_mask & (BIT_ULL(GAUDI_ENGINE_ID_MME_2)));
+ WREG32(mmMME2_QM_CGM_CFG1, enable ? QMAN_CGM1_PWR_GATE_EN : 0);
+ WREG32(mmMME2_QM_CGM_CFG, enable ? QMAN_COMMON_CP_CGM_PWR_GATE_EN : 0);
for (i = 0, qman_offset = 0 ; i < TPC_NUMBER_OF_ENGINES ; i++) {
- if (!(hdev->clock_gating_mask &
- (BIT_ULL(GAUDI_ENGINE_ID_TPC_0 + i))))
- continue;
+ enable = !!(hdev->clock_gating_mask &
+ (BIT_ULL(GAUDI_ENGINE_ID_TPC_0 + i)));
WREG32(mmTPC0_QM_CGM_CFG1 + qman_offset,
- QMAN_CGM1_PWR_GATE_EN);
+ enable ? QMAN_CGM1_PWR_GATE_EN : 0);
WREG32(mmTPC0_QM_CGM_CFG + qman_offset,
- QMAN_COMMON_CP_CGM_PWR_GATE_EN);
+ enable ? QMAN_COMMON_CP_CGM_PWR_GATE_EN : 0);
qman_offset += TPC_QMAN_OFFSET;
}
--
2.17.1
next prev parent reply other threads:[~2020-08-09 11:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-09 11:53 [PATCH 1/4] habanalabs: verify user input in cs_ioctl_signal_wait Oded Gabbay
2020-08-09 11:53 ` Oded Gabbay [this message]
2020-08-09 11:53 ` [PATCH 3/4] habanalabs: proper handling of alloc size in coresight Oded Gabbay
2020-08-09 11:53 ` [PATCH 4/4] habanalabs: set max power according to card type Oded Gabbay
2020-08-09 14:52 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200809115337.23402-2-oded.gabbay@gmail.com \
--to=oded.gabbay@gmail.com \
--cc=SW_Drivers@habana.ai \
--cc=linux-kernel@vger.kernel.org \
--cc=obitton@habana.ai \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).