[v3,08/18] gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
diff mbox series

Message ID 20200809132529.264312-9-warthog618@gmail.com
State Superseded
Headers show
Series
  • gpio: cdev: add uAPI v2
Related show

Commit Message

Kent Gibson Aug. 9, 2020, 1:25 p.m. UTC
Add support for GPIO_V2_LINE_SET_CONFIG_IOCTL, the uAPI v2
line set config ioctl.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 drivers/gpio/gpiolib-cdev.c | 92 +++++++++++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

Patch
diff mbox series

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index c1b916224240..d34dad50a048 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -16,6 +16,7 @@ 
 #include <linux/kernel.h>
 #include <linux/kfifo.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/poll.h>
 #include <linux/spinlock.h>
@@ -418,6 +419,8 @@  struct edge_detector {
  * @seqno: the sequence number for edge events generated on all lines in
  * this line request.  Note that this is not used when @num_descs is 1, as
  * the line_seqno is then the same and is cheaper to calculate.
+ * @config_mutex: mutex for serializing ioctl() calls to ensure consistency
+ * of configuration, particularly multi-step accesses to desc flags.
  * @edets: an array of edge detectors, of size @num_descs
  * @descs: the GPIO descriptors held by this line request, with @num_descs
  * elements.
@@ -429,6 +432,7 @@  struct line {
 	wait_queue_head_t wait;
 	DECLARE_KFIFO_PTR(events, struct gpio_v2_line_event);
 	atomic_t seqno;
+	struct mutex config_mutex;
 	struct edge_detector *edets;
 	struct gpio_desc *descs[];
 };
@@ -703,6 +707,30 @@  static int gpio_v2_line_config_validate(struct gpio_v2_line_config *lc,
 	return 0;
 }
 
+static int gpio_v2_line_config_change_validate(struct line *line,
+					       struct gpio_v2_line_config *lc)
+{
+	int i;
+	u64 flags;
+	struct gpio_desc *desc;
+
+	for (i = 0; i < line->num_descs; i++) {
+		desc = line->descs[i];
+		flags = gpio_v2_line_config_flags(lc, i);
+		/* disallow edge detection changes */
+		if (line->edets[i].flags != (flags & GPIO_V2_LINE_EDGE_FLAGS))
+			return -EINVAL;
+
+		if (line->edets[i].flags) {
+			/* disallow polarity changes */
+			if (test_bit(FLAG_ACTIVE_LOW, &desc->flags) !=
+			    ((flags & GPIO_V2_LINE_FLAG_ACTIVE_LOW) != 0))
+				return -EINVAL;
+		}
+	}
+	return 0;
+}
+
 static void gpio_v2_line_config_flags_to_desc_flags(u64 flags,
 						    unsigned long *flagsp)
 {
@@ -783,6 +811,67 @@  static long line_get_values(struct line *line, void __user *ip)
 	return 0;
 }
 
+static long line_set_config_locked(struct line *line,
+				   struct gpio_v2_line_config *lc)
+{
+	struct gpio_desc *desc;
+	int i, ret;
+	u64 flags;
+
+	ret = gpio_v2_line_config_change_validate(line, lc);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < line->num_descs; i++) {
+		desc = line->descs[i];
+		flags = gpio_v2_line_config_flags(lc, i);
+
+		gpio_v2_line_config_flags_to_desc_flags(flags, &desc->flags);
+		/*
+		 * Lines have to be requested explicitly for input
+		 * or output, else the line will be treated "as is".
+		 */
+		if (flags & GPIO_V2_LINE_FLAG_OUTPUT) {
+			int val = gpio_v2_line_config_output_value(lc, i);
+
+			edge_detector_stop(&line->edets[i]);
+			ret = gpiod_direction_output(desc, val);
+			if (ret)
+				return ret;
+		} else if (flags & GPIO_V2_LINE_FLAG_INPUT) {
+			ret = gpiod_direction_input(desc);
+			if (ret)
+				return ret;
+		}
+
+		blocking_notifier_call_chain(&desc->gdev->notifier,
+					     GPIO_V2_LINE_CHANGED_CONFIG,
+					     desc);
+	}
+	return 0;
+}
+
+static long line_set_config(struct line *line, void __user *ip)
+{
+	struct gpio_v2_line_config lc;
+	int ret;
+
+	if (copy_from_user(&lc, ip, sizeof(lc)))
+		return -EFAULT;
+
+	ret = gpio_v2_line_config_validate(&lc, line->num_descs);
+	if (ret)
+		return ret;
+
+	mutex_lock(&line->config_mutex);
+
+	ret = line_set_config_locked(line, &lc);
+
+	mutex_unlock(&line->config_mutex);
+
+	return ret;
+}
+
 static long line_ioctl(struct file *file, unsigned int cmd,
 		       unsigned long arg)
 {
@@ -791,6 +880,8 @@  static long line_ioctl(struct file *file, unsigned int cmd,
 
 	if (cmd == GPIO_V2_LINE_GET_VALUES_IOCTL)
 		return line_get_values(line, ip);
+	else if (cmd == GPIO_V2_LINE_SET_CONFIG_IOCTL)
+		return line_set_config(line, ip);
 
 	return -EINVAL;
 }
@@ -964,6 +1055,7 @@  static int line_create(struct gpio_device *gdev, void __user *ip)
 		}
 	}
 
+	mutex_init(&line->config_mutex);
 	init_waitqueue_head(&line->wait);
 	if (has_edge_detection) {
 		size = lr.event_buffer_size;