From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 8/9] powerpc: Remove __USE_RTC()
Date: Thu, 13 Aug 2020 16:36:39 +0000 (UTC) [thread overview]
Message-ID: <7ba6a9a56793fc9e4ba8199a4afd41a45a4e073c.1597336549.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <11a330af231af22874c006302a945388846f8112.1597336548.git.christophe.leroy@csgroup.eu>
Now that PowerPC 601 is gone, __USE_RTC() is never true.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/include/asm/time.h | 9 +-----
arch/powerpc/kernel/time.c | 52 +++++----------------------------
2 files changed, 9 insertions(+), 52 deletions(-)
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index ce065589192a..37fa99f9783d 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -38,9 +38,6 @@ struct div_result {
u64 result_low;
};
-/* Accessor functions for the timebase (RTC on 601) registers. */
-#define __USE_RTC() (0)
-
#ifdef CONFIG_PPC64
/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */
@@ -109,7 +106,7 @@ static inline u64 get_tb(void)
static inline u64 get_tb_or_rtc(void)
{
- return __USE_RTC() ? get_rtc() : get_tb();
+ return get_tb();
}
static inline void set_tb(unsigned int upper, unsigned int lower)
@@ -153,10 +150,6 @@ static inline void set_dec(u64 val)
static inline unsigned long tb_ticks_since(unsigned long tstamp)
{
- if (__USE_RTC()) {
- int delta = get_rtcl() - (unsigned int) tstamp;
- return delta < 0 ? delta + 1000000000 : delta;
- }
return get_tbl() - tstamp;
}
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index f85539ebb513..13c820c15d37 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -75,15 +75,6 @@
#include <linux/clockchips.h>
#include <linux/timekeeper_internal.h>
-static u64 rtc_read(struct clocksource *);
-static struct clocksource clocksource_rtc = {
- .name = "rtc",
- .rating = 400,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- .mask = CLOCKSOURCE_MASK(64),
- .read = rtc_read,
-};
-
static u64 timebase_read(struct clocksource *);
static struct clocksource clocksource_timebase = {
.name = "timebase",
@@ -447,19 +438,9 @@ void vtime_flush(struct task_struct *tsk)
void __delay(unsigned long loops)
{
unsigned long start;
- int diff;
spin_begin();
- if (__USE_RTC()) {
- start = get_rtcl();
- do {
- /* the RTCL register wraps at 1000000000 */
- diff = get_rtcl() - start;
- if (diff < 0)
- diff += 1000000000;
- spin_cpu_relax();
- } while (diff < loops);
- } else if (tb_invalid) {
+ if (tb_invalid) {
/*
* TB is in error state and isn't ticking anymore.
* HMI handler was unable to recover from TB error.
@@ -696,8 +677,6 @@ EXPORT_SYMBOL_GPL(tb_to_ns);
*/
notrace unsigned long long sched_clock(void)
{
- if (__USE_RTC())
- return get_rtc();
return mulhdu(get_tb() - boot_tb, tb_to_ns_scale) << tb_to_ns_shift;
}
@@ -847,11 +826,6 @@ void read_persistent_clock64(struct timespec64 *ts)
}
/* clocksource code */
-static notrace u64 rtc_read(struct clocksource *cs)
-{
- return (u64)get_rtc();
-}
-
static notrace u64 timebase_read(struct clocksource *cs)
{
return (u64)get_tb();
@@ -948,12 +922,7 @@ void update_vsyscall_tz(void)
static void __init clocksource_init(void)
{
- struct clocksource *clock;
-
- if (__USE_RTC())
- clock = &clocksource_rtc;
- else
- clock = &clocksource_timebase;
+ struct clocksource *clock = &clocksource_timebase;
if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
printk(KERN_ERR "clocksource: %s is already registered\n",
@@ -1071,17 +1040,12 @@ void __init time_init(void)
u64 scale;
unsigned shift;
- if (__USE_RTC()) {
- /* 601 processor: dec counts down by 128 every 128ns */
- ppc_tb_freq = 1000000000;
- } else {
- /* Normal PowerPC with timebase register */
- ppc_md.calibrate_decr();
- printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n",
- ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
- printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n",
- ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
- }
+ /* Normal PowerPC with timebase register */
+ ppc_md.calibrate_decr();
+ printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+ ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
+ printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n",
+ ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
tb_ticks_per_jiffy = ppc_tb_freq / HZ;
tb_ticks_per_sec = ppc_tb_freq;
--
2.25.0
next prev parent reply other threads:[~2020-08-13 16:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-13 16:36 [PATCH 1/9] powerpc: Remove flush_instruction_cache for book3s/32 Christophe Leroy
2020-08-13 16:36 ` [PATCH 2/9] powerpc: Remove SYNC on non 6xx Christophe Leroy
2020-08-13 16:36 ` [PATCH 3/9] powerpc: Remove CONFIG_PPC601_SYNC_FIX Christophe Leroy
2020-08-13 16:36 ` [PATCH 4/9] powerpc: Drop SYNC_601() ISYNC_601() and SYNC() Christophe Leroy
2020-08-13 16:36 ` [PATCH 5/9] powerpc: Remove PowerPC 601 Christophe Leroy
2020-08-13 16:36 ` [PATCH 6/9] powerpc: Remove support for " Christophe Leroy
2020-08-13 16:36 ` [PATCH 7/9] powerpc: Tidy up a bit after removal of " Christophe Leroy
2020-08-13 16:36 ` Christophe Leroy [this message]
2020-08-13 16:36 ` [PATCH 9/9] powerpc: Remove get_tb_or_rtc() Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7ba6a9a56793fc9e4ba8199a4afd41a45a4e073c.1597336549.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).