From: Wolfram Sang <wsa@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Rosin <peda@axentia.se>,
Bartosz Golaszewski <brgl@bgdev.pl>
Subject: [PULL REQUEST] i2c for 5.9
Date: Thu, 13 Aug 2020 23:09:06 +0200 [thread overview]
Message-ID: <20200813210906.GA4855@kunai> (raw)
[-- Attachment #1: Type: text/plain, Size: 8354 bytes --]
Linus,
likely because of the holiday season, the I2C pull request is quite smaller
this time. Main features:
* bus recovery can now be given a pinctrl handle and the I2C core will
do all the steps to switch to/from GPIO which can save quite some
boilerplate code from drivers
* "fallthrough" conversion
* driver updates, mostly ID additions
Quite a list of reviewers, thanks everyone!
Regards,
Wolfram
The following changes since commit 92ed301919932f777713b9172e525674157e983d:
Linux 5.8-rc7 (2020-07-26 14:14:06 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-5.9
for you to fetch changes up to b1eef236f50ba6afea680da039ef3a2ca9c43d11:
i2c: iproc: fix race between client unreg and isr (2020-08-12 22:03:58 +0200)
----------------------------------------------------------------
Alexander A. Klimov (1):
i2c: bcm2835: Replace HTTP links with HTTPS ones
Codrin Ciubotariu (4):
dt-bindings: i2c: add generic properties for GPIO bus recovery
i2c: core: add generic I2C GPIO recovery
i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs
i2c: at91: Move to generic GPIO bus recovery
Dhananjay Phadke (1):
i2c: iproc: fix race between client unreg and isr
Eddie James (1):
i2c: fsi: Prevent adding adapters for ports without dts nodes
Gustavo A. R. Silva (1):
i2c: busses: Use fallthrough pseudo-keyword
Jarkko Nikula (2):
i2c: Use separate MODULE_AUTHOR() statements for multiple authors
i2c: i801: Add support for Intel Tiger Lake PCH-H
John Keeping (1):
i2c: rk3x: support master_xfer_atomic
Lad Prabhakar (2):
dt-bindings: i2c: renesas,i2c: Document r8a774e1 support
dt-bindings: i2c: renesas,iic: Document r8a774e1 support
Matthias Brugger (1):
i2c: mediatek: Fix i2c_spec_values description
Mika Westerberg (1):
i2c: i801: Add support for Intel Emmitsburg PCH
Qii Wang (4):
i2c: mediatek: Add apdma sync in i2c driver
i2c: mediatek: Add access to more than 8GB dram in i2c driver
dt-bindings: i2c: update bindings for MT8192 SoC
i2c: mediatek: Add i2c compatible for MediaTek MT8192
Sowjanya Komatineni (5):
i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM
i2c: tegra: Remove NULL pointer check before clk_enable/disable/prepare/unprepare
i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
i2c: tegra: Fix runtime resume to re-init VI I2C
i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
Vaibhav Gupta (2):
i2c: eg20t: Drop PCI wakeup calls from .suspend/.resume
i2c: eg20t: use generic power management
Wolfram Sang (6):
i2c: revert "i2c: core: Allow drivers to disable i2c-core irq mapping"
i2c: rcar: slave: only send STOP event when we have been addressed
i2c: core: do not use logical device when creating irq domain
Merge tag 'v5.8-rc7' into i2c/for-5.9
i2c: rcar: avoid race when unregistering slave
Documentation: i2c: dev: 'block process call' is supported
Yangtao Li (1):
dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node.
with much appreciated quality assurance from
----------------------------------------------------------------
Andy Shevchenko (1):
(Rev.) i2c: busses: Use fallthrough pseudo-keyword
Benjamin Tissoires (1):
(Rev.) i2c: core: do not use logical device when creating irq domain
Bjorn Helgaas (2):
(Rev.) i2c: eg20t: use generic power management
(Rev.) i2c: eg20t: Drop PCI wakeup calls from .suspend/.resume
Brendan Higgins (1):
(Rev.) i2c: busses: Use fallthrough pseudo-keyword
Dmitry Osipenko (5):
(Rev.) i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
(Rev.) i2c: tegra: Fix runtime resume to re-init VI I2C
(Rev.) i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
(Rev.) i2c: tegra: Remove NULL pointer check before clk_enable/disable/prepare/unprepare
(Rev.) i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM
Florian Fainelli (1):
(Rev.) i2c: iproc: fix race between client unreg and isr
Geert Uytterhoeven (2):
(Rev.) dt-bindings: i2c: renesas,iic: Document r8a774e1 support
(Rev.) dt-bindings: i2c: renesas,i2c: Document r8a774e1 support
Gregory CLEMENT (1):
(Rev.) i2c: busses: Use fallthrough pseudo-keyword
Heiko Stuebner (2):
(Test) i2c: rk3x: support master_xfer_atomic
(Rev.) i2c: rk3x: support master_xfer_atomic
Jean Delvare (4):
(Rev.) i2c: i801: Add support for Intel Tiger Lake PCH-H
(Rev.) i2c: i801: Add support for Intel Emmitsburg PCH
(Rev.) i2c: busses: Use fallthrough pseudo-keyword
(Rev.) i2c: Use separate MODULE_AUTHOR() statements for multiple authors
Marian-Cristian Rotariu (2):
(Rev.) dt-bindings: i2c: renesas,iic: Document r8a774e1 support
(Rev.) dt-bindings: i2c: renesas,i2c: Document r8a774e1 support
Matthias Brugger (1):
(Rev.) i2c: mediatek: Add apdma sync in i2c driver
Niklas Söderlund (1):
(Rev.) i2c: rcar: avoid race when unregistering slave
Qii Wang (1):
(Rev.) i2c: mediatek: Fix i2c_spec_values description
Rob Herring (2):
(Rev.) dt-bindings: i2c: add generic properties for GPIO bus recovery
(Rev.) dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node.
Yingjoe Chen (2):
(Rev.) i2c: mediatek: Add access to more than 8GB dram in i2c driver
(Rev.) i2c: mediatek: Add apdma sync in i2c driver
.../devicetree/bindings/i2c/i2c-mt65xx.txt | 1 +
Documentation/devicetree/bindings/i2c/i2c.txt | 10 ++
.../bindings/i2c/marvell,mv64xxx-i2c.yaml | 3 +
.../devicetree/bindings/i2c/renesas,i2c.txt | 1 +
.../devicetree/bindings/i2c/renesas,iic.txt | 1 +
Documentation/i2c/busses/i2c-i801.rst | 1 +
Documentation/i2c/dev-interface.rst | 2 +
drivers/i2c/algos/i2c-algo-pca.c | 4 +-
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-ali1535.c | 8 +-
drivers/i2c/busses/i2c-ali15x3.c | 6 +-
drivers/i2c/busses/i2c-amd8111.c | 2 +-
drivers/i2c/busses/i2c-aspeed.c | 4 +-
drivers/i2c/busses/i2c-at91-master.c | 69 +--------
drivers/i2c/busses/i2c-at91.h | 3 -
drivers/i2c/busses/i2c-bcm-iproc.c | 13 +-
drivers/i2c/busses/i2c-bcm2835.c | 2 +-
drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +-
drivers/i2c/busses/i2c-digicolor.c | 2 +-
drivers/i2c/busses/i2c-eg20t.c | 39 +----
drivers/i2c/busses/i2c-emev2.c | 3 +-
drivers/i2c/busses/i2c-fsi.c | 2 +-
drivers/i2c/busses/i2c-i801.c | 19 ++-
drivers/i2c/busses/i2c-mt65xx.c | 86 +++++++----
drivers/i2c/busses/i2c-mv64xxx.c | 9 +-
drivers/i2c/busses/i2c-nomadik.c | 3 +-
drivers/i2c/busses/i2c-piix4.c | 4 +-
drivers/i2c/busses/i2c-pnx.c | 3 +-
drivers/i2c/busses/i2c-rcar.c | 15 +-
drivers/i2c/busses/i2c-rk3x.c | 39 ++++-
drivers/i2c/busses/i2c-sh_mobile.c | 3 +-
drivers/i2c/busses/i2c-sibyte.c | 3 +-
drivers/i2c/busses/i2c-sirf.c | 4 +-
drivers/i2c/busses/i2c-synquacer.c | 3 +-
drivers/i2c/busses/i2c-tegra.c | 101 +++++++------
drivers/i2c/busses/i2c-viapro.c | 8 +-
drivers/i2c/busses/scx200_acb.c | 2 +-
drivers/i2c/i2c-core-base.c | 158 +++++++++++++++++++--
drivers/i2c/i2c-dev.c | 4 +-
drivers/i2c/i2c-slave-eeprom.c | 2 +-
include/linux/i2c.h | 14 +-
41 files changed, 409 insertions(+), 250 deletions(-)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2020-08-13 21:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-13 21:09 Wolfram Sang [this message]
2020-08-14 1:44 ` [PULL REQUEST] i2c for 5.9 pr-tracker-bot
2020-09-19 16:02 Wolfram Sang
2020-09-20 1:41 ` pr-tracker-bot
2020-10-03 5:32 Wolfram Sang
2020-10-03 19:58 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200813210906.GA4855@kunai \
--to=wsa@kernel.org \
--cc=brgl@bgdev.pl \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).