From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: jcliburn@gmail.com, chris.snook@gmail.com, davem@davemloft.net,
kuba@kernel.org, yanaijie@huawei.com, hkallweit1@gmail.com,
mhabets@solarflare.com, mst@redhat.com, leon@kernel.org,
colin.king@canonical.com, yuehaibing@huawei.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel-janitors@vger.kernel.org,
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Subject: [PATCH] net: atheros: switch from 'pci_' to 'dma_' API
Date: Sun, 23 Aug 2020 10:03:53 +0200 [thread overview]
Message-ID: <20200823080353.169306-1-christophe.jaillet@wanadoo.fr> (raw)
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'atl1e_setup_ring_resources()' (atl1e_main.c),
'atl1_setup_ring_resources()' (atl1.c) and 'atl2_setup_ring_resources()'
(atl2.c) GFP_KERNEL can be used because it can be called from a .ndo_open.
'atl1_setup_ring_resources()' (atl1.c) can also be called from a
'.set_ringparam' (see struct ethtool_ops) where sleep is also allowed.
Both cases are protected by 'rtnl_lock()' which is a mutex. So these
function can sleep.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
If needed, see post from Christoph Hellwig on the kernel-janitors ML:
https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
---
.../net/ethernet/atheros/atl1c/atl1c_main.c | 48 ++++++++--------
.../net/ethernet/atheros/atl1e/atl1e_main.c | 57 +++++++++++--------
drivers/net/ethernet/atheros/atlx/atl1.c | 48 ++++++++--------
drivers/net/ethernet/atheros/atlx/atl2.c | 12 ++--
4 files changed, 88 insertions(+), 77 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index decab9a8e4a8..b930dc49fe8e 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -826,16 +826,16 @@ static inline void atl1c_clean_buffer(struct pci_dev *pdev,
return;
if (buffer_info->dma) {
if (buffer_info->flags & ATL1C_PCIMAP_FROMDEVICE)
- pci_driection = PCI_DMA_FROMDEVICE;
+ pci_driection = DMA_FROM_DEVICE;
else
- pci_driection = PCI_DMA_TODEVICE;
+ pci_driection = DMA_TO_DEVICE;
if (buffer_info->flags & ATL1C_PCIMAP_SINGLE)
- pci_unmap_single(pdev, buffer_info->dma,
- buffer_info->length, pci_driection);
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ buffer_info->length, pci_driection);
else if (buffer_info->flags & ATL1C_PCIMAP_PAGE)
- pci_unmap_page(pdev, buffer_info->dma,
- buffer_info->length, pci_driection);
+ dma_unmap_page(&pdev->dev, buffer_info->dma,
+ buffer_info->length, pci_driection);
}
if (buffer_info->skb)
dev_consume_skb_any(buffer_info->skb);
@@ -933,9 +933,8 @@ static void atl1c_free_ring_resources(struct atl1c_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
- pci_free_consistent(pdev, adapter->ring_header.size,
- adapter->ring_header.desc,
- adapter->ring_header.dma);
+ dma_free_coherent(&pdev->dev, adapter->ring_header.size,
+ adapter->ring_header.desc, adapter->ring_header.dma);
adapter->ring_header.desc = NULL;
/* Note: just free tdp_ring.buffer_info,
@@ -1717,10 +1716,9 @@ static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter)
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
buffer_info->skb = skb;
buffer_info->length = adapter->rx_buffer_len;
- mapping = pci_map_single(pdev, vir_addr,
- buffer_info->length,
- PCI_DMA_FROMDEVICE);
- if (unlikely(pci_dma_mapping_error(pdev, mapping))) {
+ mapping = dma_map_single(&pdev->dev, vir_addr,
+ buffer_info->length, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(&pdev->dev, mapping))) {
dev_kfree_skb(skb);
buffer_info->skb = NULL;
buffer_info->length = 0;
@@ -1831,8 +1829,8 @@ static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter,
rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) &
RRS_RX_RFD_INDEX_MASK;
buffer_info = &rfd_ring->buffer_info[rfd_index];
- pci_unmap_single(pdev, buffer_info->dma,
- buffer_info->length, PCI_DMA_FROMDEVICE);
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_FROM_DEVICE);
skb = buffer_info->skb;
} else {
/* TODO */
@@ -2106,10 +2104,10 @@ static int atl1c_tx_map(struct atl1c_adapter *adapter,
buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
buffer_info->length = map_len;
- buffer_info->dma = pci_map_single(adapter->pdev,
- skb->data, hdr_len, PCI_DMA_TODEVICE);
- if (unlikely(pci_dma_mapping_error(adapter->pdev,
- buffer_info->dma)))
+ buffer_info->dma = dma_map_single(&adapter->pdev->dev,
+ skb->data, hdr_len,
+ DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)))
goto err_dma;
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE,
@@ -2131,10 +2129,10 @@ static int atl1c_tx_map(struct atl1c_adapter *adapter,
buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
buffer_info->length = buf_len - mapped_len;
buffer_info->dma =
- pci_map_single(adapter->pdev, skb->data + mapped_len,
- buffer_info->length, PCI_DMA_TODEVICE);
- if (unlikely(pci_dma_mapping_error(adapter->pdev,
- buffer_info->dma)))
+ dma_map_single(&adapter->pdev->dev,
+ skb->data + mapped_len,
+ buffer_info->length, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)))
goto err_dma;
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
@@ -2542,8 +2540,8 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
* various kernel subsystems to support the mechanics required by a
* fixed-high-32-bit system.
*/
- if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
- (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
+ if ((dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) != 0) ||
+ (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)) != 0)) {
dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
goto err_dma;
}
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 223ef846123e..fb78f6c31708 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -654,11 +654,13 @@ static void atl1e_clean_tx_ring(struct atl1e_adapter *adapter)
tx_buffer = &tx_ring->tx_buffer[index];
if (tx_buffer->dma) {
if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE)
- pci_unmap_single(pdev, tx_buffer->dma,
- tx_buffer->length, PCI_DMA_TODEVICE);
+ dma_unmap_single(&pdev->dev, tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE)
- pci_unmap_page(pdev, tx_buffer->dma,
- tx_buffer->length, PCI_DMA_TODEVICE);
+ dma_unmap_page(&pdev->dev, tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
tx_buffer->dma = 0;
}
}
@@ -774,8 +776,8 @@ static void atl1e_free_ring_resources(struct atl1e_adapter *adapter)
atl1e_clean_rx_ring(adapter);
if (adapter->ring_vir_addr) {
- pci_free_consistent(pdev, adapter->ring_size,
- adapter->ring_vir_addr, adapter->ring_dma);
+ dma_free_coherent(&pdev->dev, adapter->ring_size,
+ adapter->ring_vir_addr, adapter->ring_dma);
adapter->ring_vir_addr = NULL;
}
@@ -810,11 +812,12 @@ static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter)
/* real ring DMA buffer */
size = adapter->ring_size;
- adapter->ring_vir_addr = pci_zalloc_consistent(pdev, adapter->ring_size,
- &adapter->ring_dma);
+ adapter->ring_vir_addr = dma_alloc_coherent(&pdev->dev,
+ adapter->ring_size,
+ &adapter->ring_dma, GFP_KERNEL);
if (adapter->ring_vir_addr == NULL) {
netdev_err(adapter->netdev,
- "pci_alloc_consistent failed, size = D%d\n", size);
+ "dma_alloc_coherent failed, size = D%d\n", size);
return -ENOMEM;
}
@@ -870,8 +873,8 @@ static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter)
return 0;
failed:
if (adapter->ring_vir_addr != NULL) {
- pci_free_consistent(pdev, adapter->ring_size,
- adapter->ring_vir_addr, adapter->ring_dma);
+ dma_free_coherent(&pdev->dev, adapter->ring_size,
+ adapter->ring_vir_addr, adapter->ring_dma);
adapter->ring_vir_addr = NULL;
}
return err;
@@ -1233,11 +1236,15 @@ static bool atl1e_clean_tx_irq(struct atl1e_adapter *adapter)
tx_buffer = &tx_ring->tx_buffer[next_to_clean];
if (tx_buffer->dma) {
if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE)
- pci_unmap_single(adapter->pdev, tx_buffer->dma,
- tx_buffer->length, PCI_DMA_TODEVICE);
+ dma_unmap_single(&adapter->pdev->dev,
+ tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE)
- pci_unmap_page(adapter->pdev, tx_buffer->dma,
- tx_buffer->length, PCI_DMA_TODEVICE);
+ dma_unmap_page(&adapter->pdev->dev,
+ tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
tx_buffer->dma = 0;
}
@@ -1710,8 +1717,9 @@ static int atl1e_tx_map(struct atl1e_adapter *adapter,
tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
tx_buffer->length = map_len;
- tx_buffer->dma = pci_map_single(adapter->pdev,
- skb->data, hdr_len, PCI_DMA_TODEVICE);
+ tx_buffer->dma = dma_map_single(&adapter->pdev->dev,
+ skb->data, hdr_len,
+ DMA_TO_DEVICE);
if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma))
return -ENOSPC;
@@ -1739,8 +1747,9 @@ static int atl1e_tx_map(struct atl1e_adapter *adapter,
((buf_len - mapped_len) >= MAX_TX_BUF_LEN) ?
MAX_TX_BUF_LEN : (buf_len - mapped_len);
tx_buffer->dma =
- pci_map_single(adapter->pdev, skb->data + mapped_len,
- map_len, PCI_DMA_TODEVICE);
+ dma_map_single(&adapter->pdev->dev,
+ skb->data + mapped_len, map_len,
+ DMA_TO_DEVICE);
if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
/* We need to unwind the mappings we've done */
@@ -1749,8 +1758,10 @@ static int atl1e_tx_map(struct atl1e_adapter *adapter,
while (adapter->tx_ring.next_to_use != ring_end) {
tpd = atl1e_get_tpd(adapter);
tx_buffer = atl1e_get_tx_buffer(adapter, tpd);
- pci_unmap_single(adapter->pdev, tx_buffer->dma,
- tx_buffer->length, PCI_DMA_TODEVICE);
+ dma_unmap_single(&adapter->pdev->dev,
+ tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
}
/* Reset the tx rings next pointer */
adapter->tx_ring.next_to_use = ring_start;
@@ -2300,8 +2311,8 @@ static int atl1e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
* various kernel subsystems to support the mechanics required by a
* fixed-high-32-bit system.
*/
- if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
- (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
+ if ((dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) != 0) ||
+ (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)) != 0)) {
dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
goto err_dma;
}
diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index b35fcfcd692d..60f8aa79deb2 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -1050,11 +1050,11 @@ static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
+ sizeof(struct stats_msg_block)
+ 40;
- ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
- &ring_header->dma);
+ ring_header->desc = dma_alloc_coherent(&pdev->dev, ring_header->size,
+ &ring_header->dma, GFP_KERNEL);
if (unlikely(!ring_header->desc)) {
if (netif_msg_drv(adapter))
- dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
+ dev_err(&pdev->dev, "dma_alloc_coherent failed\n");
goto err_nomem;
}
@@ -1136,8 +1136,8 @@ static void atl1_clean_rx_ring(struct atl1_adapter *adapter)
for (i = 0; i < rfd_ring->count; i++) {
buffer_info = &rfd_ring->buffer_info[i];
if (buffer_info->dma) {
- pci_unmap_page(pdev, buffer_info->dma,
- buffer_info->length, PCI_DMA_FROMDEVICE);
+ dma_unmap_page(&pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_FROM_DEVICE);
buffer_info->dma = 0;
}
if (buffer_info->skb) {
@@ -1175,8 +1175,8 @@ static void atl1_clean_tx_ring(struct atl1_adapter *adapter)
for (i = 0; i < tpd_ring->count; i++) {
buffer_info = &tpd_ring->buffer_info[i];
if (buffer_info->dma) {
- pci_unmap_page(pdev, buffer_info->dma,
- buffer_info->length, PCI_DMA_TODEVICE);
+ dma_unmap_page(&pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
buffer_info->dma = 0;
}
}
@@ -1217,8 +1217,8 @@ static void atl1_free_ring_resources(struct atl1_adapter *adapter)
atl1_clean_rx_ring(adapter);
kfree(tpd_ring->buffer_info);
- pci_free_consistent(pdev, ring_header->size, ring_header->desc,
- ring_header->dma);
+ dma_free_coherent(&pdev->dev, ring_header->size, ring_header->desc,
+ ring_header->dma);
tpd_ring->buffer_info = NULL;
tpd_ring->desc = NULL;
@@ -1866,9 +1866,9 @@ static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
buffer_info->length = (u16) adapter->rx_buffer_len;
page = virt_to_page(skb->data);
offset = offset_in_page(skb->data);
- buffer_info->dma = pci_map_page(pdev, page, offset,
+ buffer_info->dma = dma_map_page(&pdev->dev, page, offset,
adapter->rx_buffer_len,
- PCI_DMA_FROMDEVICE);
+ DMA_FROM_DEVICE);
rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len);
rfd_desc->coalese = 0;
@@ -1992,8 +1992,8 @@ static int atl1_intr_rx(struct atl1_adapter *adapter, int budget)
}
/* Good Receive */
- pci_unmap_page(adapter->pdev, buffer_info->dma,
- buffer_info->length, PCI_DMA_FROMDEVICE);
+ dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_FROM_DEVICE);
buffer_info->dma = 0;
skb = buffer_info->skb;
length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
@@ -2062,8 +2062,8 @@ static int atl1_intr_tx(struct atl1_adapter *adapter)
while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
if (buffer_info->dma) {
- pci_unmap_page(adapter->pdev, buffer_info->dma,
- buffer_info->length, PCI_DMA_TODEVICE);
+ dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
buffer_info->dma = 0;
}
@@ -2210,9 +2210,9 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
buffer_info->length = hdr_len;
page = virt_to_page(skb->data);
offset = offset_in_page(skb->data);
- buffer_info->dma = pci_map_page(adapter->pdev, page,
+ buffer_info->dma = dma_map_page(&adapter->pdev->dev, page,
offset, hdr_len,
- PCI_DMA_TODEVICE);
+ DMA_TO_DEVICE);
if (++next_to_use == tpd_ring->count)
next_to_use = 0;
@@ -2235,9 +2235,10 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
(hdr_len + i * ATL1_MAX_TX_BUF_LEN));
offset = offset_in_page(skb->data +
(hdr_len + i * ATL1_MAX_TX_BUF_LEN));
- buffer_info->dma = pci_map_page(adapter->pdev,
- page, offset, buffer_info->length,
- PCI_DMA_TODEVICE);
+ buffer_info->dma = dma_map_page(&adapter->pdev->dev,
+ page, offset,
+ buffer_info->length,
+ DMA_TO_DEVICE);
if (++next_to_use == tpd_ring->count)
next_to_use = 0;
}
@@ -2247,8 +2248,9 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
buffer_info->length = buf_len;
page = virt_to_page(skb->data);
offset = offset_in_page(skb->data);
- buffer_info->dma = pci_map_page(adapter->pdev, page,
- offset, buf_len, PCI_DMA_TODEVICE);
+ buffer_info->dma = dma_map_page(&adapter->pdev->dev, page,
+ offset, buf_len,
+ DMA_TO_DEVICE);
if (++next_to_use == tpd_ring->count)
next_to_use = 0;
}
@@ -2922,7 +2924,7 @@ static int atl1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
* various kernel subsystems to support the mechanics required by a
* fixed-high-32-bit system.
*/
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_dma;
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index c915852b8892..22c9e23195d8 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -281,8 +281,8 @@ static s32 atl2_setup_ring_resources(struct atl2_adapter *adapter)
adapter->txs_ring_size * 4 + 7 + /* dword align */
adapter->rxd_ring_size * 1536 + 127; /* 128bytes align */
- adapter->ring_vir_addr = pci_alloc_consistent(pdev, size,
- &adapter->ring_dma);
+ adapter->ring_vir_addr = dma_alloc_coherent(&pdev->dev, size,
+ &adapter->ring_dma, GFP_KERNEL);
if (!adapter->ring_vir_addr)
return -ENOMEM;
@@ -663,8 +663,8 @@ static int atl2_request_irq(struct atl2_adapter *adapter)
static void atl2_free_ring_resources(struct atl2_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
- pci_free_consistent(pdev, adapter->ring_size, adapter->ring_vir_addr,
- adapter->ring_dma);
+ dma_free_coherent(&pdev->dev, adapter->ring_size,
+ adapter->ring_vir_addr, adapter->ring_dma);
}
/**
@@ -1328,8 +1328,8 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
* until the kernel has the proper infrastructure to support 64-bit DMA
* on these devices.
*/
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) &&
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) &&
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
err = -EIO;
goto err_dma;
--
2.25.1
next reply other threads:[~2020-08-23 8:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-23 8:03 Christophe JAILLET [this message]
2020-08-25 0:33 ` [PATCH] net: atheros: switch from 'pci_' to 'dma_' API David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200823080353.169306-1-christophe.jaillet@wanadoo.fr \
--to=christophe.jaillet@wanadoo.fr \
--cc=chris.snook@gmail.com \
--cc=colin.king@canonical.com \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=jcliburn@gmail.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mhabets@solarflare.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=yanaijie@huawei.com \
--cc=yuehaibing@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).