From: Alex Dewar <alex.dewar90@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Alex Dewar <alex.dewar90@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] serial: core: don't use snprintf() for formatting sysfs attrs
Date: Mon, 24 Aug 2020 23:39:33 +0100 [thread overview]
Message-ID: <20200824223932.27709-1-alex.dewar90@gmail.com> (raw)
As per the documentation (Documentation/filesystems/sysfs.rst),
snprintf() should not be used for formatting values returned by sysfs.
For all of the instances in serial_core.c, we know that the string will
be <PAGE_SIZE in length, so just use sprintf().
Issue identified by Coccinelle.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
---
drivers/tty/serial/serial_core.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f797c971cd82f..4d313385cb2a7 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2637,7 +2637,7 @@ static ssize_t uartclk_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.baud_base * 16);
+ return sprintf(buf, "%d\n", tmp.baud_base * 16);
}
static ssize_t type_show(struct device *dev,
@@ -2647,7 +2647,7 @@ static ssize_t type_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.type);
+ return sprintf(buf, "%d\n", tmp.type);
}
static ssize_t line_show(struct device *dev,
@@ -2657,7 +2657,7 @@ static ssize_t line_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.line);
+ return sprintf(buf, "%d\n", tmp.line);
}
static ssize_t port_show(struct device *dev,
@@ -2671,7 +2671,7 @@ static ssize_t port_show(struct device *dev,
ioaddr = tmp.port;
if (HIGH_BITS_OFFSET)
ioaddr |= (unsigned long)tmp.port_high << HIGH_BITS_OFFSET;
- return snprintf(buf, PAGE_SIZE, "0x%lX\n", ioaddr);
+ return sprintf(buf, "0x%lX\n", ioaddr);
}
static ssize_t irq_show(struct device *dev,
@@ -2681,7 +2681,7 @@ static ssize_t irq_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.irq);
+ return sprintf(buf, "%d\n", tmp.irq);
}
static ssize_t flags_show(struct device *dev,
@@ -2691,7 +2691,7 @@ static ssize_t flags_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "0x%X\n", tmp.flags);
+ return sprintf(buf, "0x%X\n", tmp.flags);
}
static ssize_t xmit_fifo_size_show(struct device *dev,
@@ -2701,7 +2701,7 @@ static ssize_t xmit_fifo_size_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.xmit_fifo_size);
+ return sprintf(buf, "%d\n", tmp.xmit_fifo_size);
}
static ssize_t close_delay_show(struct device *dev,
@@ -2711,7 +2711,7 @@ static ssize_t close_delay_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.close_delay);
+ return sprintf(buf, "%d\n", tmp.close_delay);
}
static ssize_t closing_wait_show(struct device *dev,
@@ -2721,7 +2721,7 @@ static ssize_t closing_wait_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.closing_wait);
+ return sprintf(buf, "%d\n", tmp.closing_wait);
}
static ssize_t custom_divisor_show(struct device *dev,
@@ -2731,7 +2731,7 @@ static ssize_t custom_divisor_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.custom_divisor);
+ return sprintf(buf, "%d\n", tmp.custom_divisor);
}
static ssize_t io_type_show(struct device *dev,
@@ -2741,7 +2741,7 @@ static ssize_t io_type_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.io_type);
+ return sprintf(buf, "%d\n", tmp.io_type);
}
static ssize_t iomem_base_show(struct device *dev,
@@ -2751,7 +2751,7 @@ static ssize_t iomem_base_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "0x%lX\n", (unsigned long)tmp.iomem_base);
+ return sprintf(buf, "0x%lX\n", (unsigned long)tmp.iomem_base);
}
static ssize_t iomem_reg_shift_show(struct device *dev,
@@ -2761,7 +2761,7 @@ static ssize_t iomem_reg_shift_show(struct device *dev,
struct tty_port *port = dev_get_drvdata(dev);
uart_get_info(port, &tmp);
- return snprintf(buf, PAGE_SIZE, "%d\n", tmp.iomem_reg_shift);
+ return sprintf(buf, "%d\n", tmp.iomem_reg_shift);
}
static ssize_t console_show(struct device *dev,
--
2.28.0
reply other threads:[~2020-08-24 22:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200824223932.27709-1-alex.dewar90@gmail.com \
--to=alex.dewar90@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).