[PATCH v2] ARM: dts: r8a7742-iwg21m: Add SPI NOR support

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-renesas-soc@vger.kernel.or, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Prabhakar <prabhakar.csengg@gmail.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v2] ARM: dts: r8a7742-iwg21m: Add SPI NOR support
Date: Tue, 25 Aug 2020 09:54:35 +0100	[thread overview]
Message-ID: <20200825085435.8744-1-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)

Add support for the SPI NOR device used to boot up the system
to the System on Module DT.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
---
Hi all,

This patch is part of series [1], since rest of the patches have been
acked I am just resending patch 3/3 from the series.

[1] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=333197

v1->v2
* Dropped #address-cells/#size-cells from flash node.
* Added partitions for flash node.
---
 arch/arm/boot/dts/r8a7742-iwg21m.dtsi | 51 +++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
index 0f26807f92b8..5621c9ed698f 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -35,6 +35,16 @@
 	clock-frequency = <20000000>;
 };
 
+&gpio0 {
+	/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
+	qspi_en {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "QSPI_EN";
+	};
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
@@ -70,4 +80,45 @@
 		groups = "mmc1_data4", "mmc1_ctrl";
 		function = "mmc1";
 	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data2";
+		function = "qspi";
+	};
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x00000000 0x000c0000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "env";
+				reg = <0x000c0000 0x00002000>;
+			};
+			partition@c2000 {
+				label = "user";
+				reg = <0x000c2000 0x0013e000>;
+			};
+		};
+	};
 };
-- 
2.17.1

