linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Prabhakar <prabhakar.csengg@gmail.com>
Subject: [PATCH v2 1/3] ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
Date: Mon,  7 Sep 2020 16:55:39 +0100	[thread overview]
Message-ID: <20200907155541.2011-2-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20200907155541.2011-1-prabhakar.mahadev-lad.rj@bp.renesas.com>

Add support for the SPI NOR device which is connected to MSIOF0 interface
on the iWave RainboW-G21d-q7 board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 31 +++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 73300ab46ea6..818f1a850c62 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -220,6 +220,32 @@
 	status = "okay";
 };
 
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+
+	flash1: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x00000000 0x00200000>;
+			};
+		};
+	};
+};
+
 &pci0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
@@ -266,6 +292,11 @@
 		function = "i2c2";
 	};
 
+	msiof0_pins: msiof0 {
+		groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx";
+		function = "msiof0";
+	};
+
 	scifa2_pins: scifa2 {
 		groups = "scifa2_data_c";
 		function = "scifa2";
-- 
2.17.1


  reply	other threads:[~2020-09-07 15:56 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-07 15:55 [PATCH v2 0/3] iWave G21D-Q7 enable flash, CAN and SD2 LED Lad Prabhakar
2020-09-07 15:55 ` Lad Prabhakar [this message]
2020-09-10  9:03   ` [PATCH v2 1/3] ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support Geert Uytterhoeven
2020-09-07 15:55 ` [PATCH v2 2/3] ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board Lad Prabhakar
2020-09-10  9:04   ` Geert Uytterhoeven
2020-09-07 15:55 ` [PATCH v2 3/3] ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication Lad Prabhakar
2020-09-10  9:05   ` Geert Uytterhoeven
2020-10-09  7:33   ` Pavel Machek
2020-10-09  8:41     ` Lad, Prabhakar
2020-10-09 17:36       ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200907155541.2011-2-prabhakar.mahadev-lad.rj@bp.renesas.com \
    --to=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=prabhakar.csengg@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).