From: Jim Quinlan <james.quinlan@broadcom.com>
To: linux-pci@vger.kernel.org,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Christoph Hellwig <hch@lst.de>,
Robin Murphy <robin.murphy@arm.com>,
bcm-kernel-feedback-list@broadcom.com,
james.quinlan@broadcom.com
Cc: Jim Quinlan <jquinlan@broadcom.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Rob Herring <robh@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v12 05/10] PCI: brcmstb: Add bcm7278 PERST# support
Date: Fri, 11 Sep 2020 13:52:25 -0400 [thread overview]
Message-ID: <20200911175232.19016-6-james.quinlan@broadcom.com> (raw)
In-Reply-To: <20200911175232.19016-1-james.quinlan@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 8302 bytes --]
From: Jim Quinlan <jquinlan@broadcom.com>
The PERST# bit was moved to a different register in 7278-type STB chips.
In addition, the polarity of the bit was also changed; for other chips
writing a 1 specified assert; for 7278-type chips, writing a 0 specifies
assert. Of course, PERST# is a PCIe asserted-low signal.
While we are here, also change the bridge_sw_init_set() functions so like
the perst_set() functions they are chip specific and we no longer rely on
data wrt chip specific field mask and shift values.
Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/pci/controller/pcie-brcmstb.c | 97 +++++++++++++++++++--------
1 file changed, 69 insertions(+), 28 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 7f5e7848df47..947cf3115eb0 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -83,6 +83,7 @@
#define PCIE_MISC_PCIE_CTRL 0x4064
#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1
+#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4
#define PCIE_MISC_PCIE_STATUS 0x4068
#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80
@@ -125,6 +126,11 @@
#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1
#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0
+#define RGR1_SW_INIT_1_INIT_GENERIC_MASK 0x2
+#define RGR1_SW_INIT_1_INIT_GENERIC_SHIFT 0x1
+#define RGR1_SW_INIT_1_INIT_7278_MASK 0x1
+#define RGR1_SW_INIT_1_INIT_7278_SHIFT 0x0
+
/* PCIe parameters */
#define BRCM_NUM_PCIE_OUT_WINS 0x4
#define BRCM_INT_PCI_MSI_NR 32
@@ -157,6 +163,23 @@
#define DATA_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_DATA])
#define PCIE_RGR1_SW_INIT_1(pcie) (pcie->reg_offsets[RGR1_SW_INIT_1])
+/* Rescal registers */
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL 0xc700
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS 0x3
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK 0x4
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT 0x2
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK 0x2
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT 0x1
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK 0x1
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT 0x0
+
+/* Forward declarations */
+struct brcm_pcie;
+static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val);
+static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val);
+static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val);
+static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val);
+
enum {
RGR1_SW_INIT_1,
EXT_CFG_INDEX,
@@ -175,19 +198,10 @@ enum pcie_type {
};
struct pcie_cfg_data {
- const int *reg_field_info;
const int *offsets;
const enum pcie_type type;
-};
-
-static const int pcie_reg_field_info[] = {
- [RGR1_SW_INIT_1_INIT_MASK] = 0x2,
- [RGR1_SW_INIT_1_INIT_SHIFT] = 0x1,
-};
-
-static const int pcie_reg_field_info_bcm7278[] = {
- [RGR1_SW_INIT_1_INIT_MASK] = 0x1,
- [RGR1_SW_INIT_1_INIT_SHIFT] = 0x0,
+ void (*perst_set)(struct brcm_pcie *pcie, u32 val);
+ void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
};
static const int pcie_offsets[] = {
@@ -197,9 +211,10 @@ static const int pcie_offsets[] = {
};
static const struct pcie_cfg_data generic_cfg = {
- .reg_field_info = pcie_reg_field_info,
.offsets = pcie_offsets,
.type = GENERIC,
+ .perst_set = brcm_pcie_perst_set_generic,
+ .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
static const int pcie_offset_bcm7278[] = {
@@ -209,15 +224,17 @@ static const int pcie_offset_bcm7278[] = {
};
static const struct pcie_cfg_data bcm7278_cfg = {
- .reg_field_info = pcie_reg_field_info_bcm7278,
.offsets = pcie_offset_bcm7278,
.type = BCM7278,
+ .perst_set = brcm_pcie_perst_set_7278,
+ .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
};
static const struct pcie_cfg_data bcm2711_cfg = {
- .reg_field_info = pcie_reg_field_info,
.offsets = pcie_offsets,
.type = BCM2711,
+ .perst_set = brcm_pcie_perst_set_generic,
+ .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
struct brcm_msi {
@@ -244,8 +261,13 @@ struct brcm_pcie {
u64 msi_target_addr;
struct brcm_msi *msi;
const int *reg_offsets;
- const int *reg_field_info;
enum pcie_type type;
+ struct reset_control *rescal;
+ int num_memc;
+ u64 memc_size[PCIE_BRCM_MAX_MEMC];
+ u32 hw_rev;
+ void (*perst_set)(struct brcm_pcie *pcie, u32 val);
+ void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
};
/*
@@ -670,17 +692,37 @@ static struct pci_ops brcm_pcie_ops = {
.write = pci_generic_config_write,
};
-static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val)
+static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val)
{
- u32 tmp, mask = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK];
- u32 shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT];
+ u32 tmp, mask = RGR1_SW_INIT_1_INIT_GENERIC_MASK;
+ u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
tmp = (tmp & ~mask) | ((val << shift) & mask);
writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
}
-static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val)
+static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val)
+{
+ u32 tmp, mask = RGR1_SW_INIT_1_INIT_7278_MASK;
+ u32 shift = RGR1_SW_INIT_1_INIT_7278_SHIFT;
+
+ tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+ tmp = (tmp & ~mask) | ((val << shift) & mask);
+ writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+}
+
+static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val)
+{
+ u32 tmp;
+
+ /* Perst bit has moved and assert value is 0 */
+ tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL);
+ u32p_replace_bits(&tmp, !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK);
+ writel(tmp, pcie->base + PCIE_MISC_PCIE_CTRL);
+}
+
+static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val)
{
u32 tmp;
@@ -770,13 +812,11 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
u32 tmp, aspm_support;
/* Reset the bridge */
- brcm_pcie_bridge_sw_init_set(pcie, 1);
- brcm_pcie_perst_set(pcie, 1);
-
+ pcie->bridge_sw_init_set(pcie, 1);
usleep_range(100, 200);
/* Take the bridge out of reset */
- brcm_pcie_bridge_sw_init_set(pcie, 0);
+ pcie->bridge_sw_init_set(pcie, 0);
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
@@ -842,7 +882,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
brcm_pcie_set_gen(pcie, pcie->gen);
/* Unassert the fundamental reset */
- brcm_pcie_perst_set(pcie, 0);
+ pcie->perst_set(pcie, 0);
/*
* Give the RC/EP time to wake up, before trying to configure RC.
@@ -962,7 +1002,7 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
if (brcm_pcie_link_up(pcie))
brcm_pcie_enter_l23(pcie);
/* Assert fundamental reset */
- brcm_pcie_perst_set(pcie, 1);
+ pcie->perst_set(pcie, 1);
/* Deassert request for L23 in case it was asserted */
tmp = readl(base + PCIE_MISC_PCIE_CTRL);
@@ -975,7 +1015,7 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
/* Shutdown PCIe bridge */
- brcm_pcie_bridge_sw_init_set(pcie, 1);
+ pcie->bridge_sw_init_set(pcie, 1);
}
static int brcm_pcie_suspend(struct device *dev)
@@ -999,7 +1039,7 @@ static int brcm_pcie_resume(struct device *dev)
clk_prepare_enable(pcie->clk);
/* Take bridge out of reset so we can access the SERDES reg */
- brcm_pcie_bridge_sw_init_set(pcie, 0);
+ pcie->bridge_sw_init_set(pcie, 0);
/* SERDES_IDDQ = 0 */
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
@@ -1080,8 +1120,9 @@ static int brcm_pcie_probe(struct platform_device *pdev)
pcie->dev = &pdev->dev;
pcie->np = np;
pcie->reg_offsets = data->offsets;
- pcie->reg_field_info = data->reg_field_info;
pcie->type = data->type;
+ pcie->perst_set = data->perst_set;
+ pcie->bridge_sw_init_set = data->bridge_sw_init_set;
pcie->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pcie->base))
--
2.17.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4167 bytes --]
next prev parent reply other threads:[~2020-09-11 17:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-11 17:52 [PATCH v12 00/10] PCI: brcmstb: enable PCIe for STB chips Jim Quinlan
2020-09-11 17:52 ` [PATCH v12 01/10] PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB Jim Quinlan
2020-09-11 17:52 ` [PATCH v12 02/10] dt-bindings: PCI: Add bindings for more Brcmstb chips Jim Quinlan
2020-09-11 17:52 ` [PATCH v12 03/10] PCI: brcmstb: Add bcm7278 register info Jim Quinlan
2020-09-11 17:52 ` [PATCH v12 04/10] PCI: brcmstb: Add suspend and resume pm_ops Jim Quinlan
2020-09-16 15:24 ` Rob Herring
2020-09-11 17:52 ` Jim Quinlan [this message]
2020-09-16 15:24 ` [PATCH v12 05/10] PCI: brcmstb: Add bcm7278 PERST# support Rob Herring
2020-09-11 17:52 ` [PATCH v12 06/10] PCI: brcmstb: Add control of rescal reset Jim Quinlan
2020-09-16 15:26 ` Rob Herring
2020-09-11 17:52 ` [PATCH v12 07/10] PCI: brcmstb: Set additional internal memory DMA viewport sizes Jim Quinlan
2020-09-11 17:52 ` [PATCH v12 08/10] PCI: brcmstb: Accommodate MSI for older chips Jim Quinlan
2020-09-11 17:52 ` [PATCH v12 09/10] PCI: brcmstb: Set bus max burst size by chip type Jim Quinlan
2020-09-11 17:52 ` [PATCH v12 10/10] PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list Jim Quinlan
2020-09-17 12:08 ` [PATCH v12 00/10] PCI: brcmstb: enable PCIe for STB chips Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200911175232.19016-6-james.quinlan@broadcom.com \
--to=james.quinlan@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=f.fainelli@gmail.com \
--cc=hch@lst.de \
--cc=jquinlan@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=nsaenzjulienne@suse.de \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).