From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
rjliao@codeaurora.org, hbandi@codeaurora.org,
abhishekpandit@chromium.org,
Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Subject: [PATCH v1] Bluetooth: Use NVM files based on SoC ID for WCN3991
Date: Tue, 15 Sep 2020 21:13:25 +0530 [thread overview]
Message-ID: <1600184605-31611-1-git-send-email-gubbaven@codeaurora.org> (raw)
This change will allow to use different NVM file based
on WCN3991 BT SoC ID.Need to use different NVM file based on
fab location for WCN3991 BT SoC.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
drivers/bluetooth/btqca.c | 41 +++++++++++++++++++++++++----------------
drivers/bluetooth/btqca.h | 13 ++++++++-----
drivers/bluetooth/hci_qca.c | 11 +++++------
3 files changed, 38 insertions(+), 27 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ce9dcff..a7e72f1 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -14,12 +14,11 @@
#define VERSION "0.1"
-int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
+int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
enum qca_btsoc_type soc_type)
{
struct sk_buff *skb;
struct edl_event_hdr *edl;
- struct qca_btsoc_version *ver;
char cmd;
int err = 0;
u8 event_type = HCI_EV_VENDOR;
@@ -70,9 +69,9 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
}
if (soc_type >= QCA_WCN3991)
- memmove(&edl->data, &edl->data[1], sizeof(*ver));
-
- ver = (struct qca_btsoc_version *)(edl->data);
+ memcpy(ver, &edl->data[1], sizeof(*ver));
+ else
+ memcpy(ver, &edl->data, sizeof(*ver));
bt_dev_info(hdev, "QCA Product ID :0x%08x",
le32_to_cpu(ver->product_id));
@@ -83,13 +82,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
bt_dev_info(hdev, "QCA Patch Version:0x%08x",
le16_to_cpu(ver->patch_ver));
- /* QCA chipset version can be decided by patch and SoC
- * version, combination with upper 2 bytes from SoC
- * and lower 2 bytes from patch will be used.
- */
- *soc_version = (le32_to_cpu(ver->soc_id) << 16) |
- (le16_to_cpu(ver->rom_ver) & 0x0000ffff);
- if (*soc_version == 0)
+ if (le32_to_cpu(ver->soc_id) == 0 || le16_to_cpu(ver->rom_ver) == 0)
err = -EILSEQ;
out:
@@ -446,15 +439,25 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
- enum qca_btsoc_type soc_type, u32 soc_ver,
+ enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
const char *firmware_name)
{
struct qca_fw_config config;
int err;
u8 rom_ver = 0;
+ u32 soc_ver;
bt_dev_dbg(hdev, "QCA setup on UART");
+ /* QCA chipset version can be decided by patch and SoC
+ * version, combination with upper 2 bytes from SoC
+ * and lower 2 bytes from patch will be used.
+ */
+ soc_ver = (le32_to_cpu(ver.soc_id) << 16) |
+ (le16_to_cpu(ver.rom_ver) & 0x0000ffff);
+
+ bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
+
config.user_baud_rate = baudrate;
/* Download rampatch file */
@@ -491,9 +494,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
if (firmware_name)
snprintf(config.fwname, sizeof(config.fwname),
"qca/%s", firmware_name);
- else if (qca_is_wcn399x(soc_type))
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/crnv%02x.bin", rom_ver);
+ else if (qca_is_wcn399x(soc_type)) {
+ if (ver.soc_id == QCA_WCN3991_SOC_ID) {
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/crnv%02xu.bin", rom_ver);
+ } else {
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/crnv%02x.bin", rom_ver);
+ }
+ }
else if (soc_type == QCA_QCA6390)
snprintf(config.fwname, sizeof(config.fwname),
"qca/htnv%02x.bin", rom_ver);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index d81b74c..d01a9f5 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -34,6 +34,8 @@
#define QCA_HCI_CC_OPCODE 0xFC00
#define QCA_HCI_CC_SUCCESS 0x00
+#define QCA_WCN3991_SOC_ID (0x40014320)
+
enum qca_baudrate {
QCA_BAUDRATE_115200 = 0,
QCA_BAUDRATE_57600,
@@ -136,9 +138,9 @@ enum qca_btsoc_type {
int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
- enum qca_btsoc_type soc_type, u32 soc_ver,
+ enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
const char *firmware_name);
-int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
+int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
enum qca_btsoc_type);
int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
@@ -155,13 +157,14 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
}
static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
- enum qca_btsoc_type soc_type, u32 soc_ver,
- const char *firmware_name)
+ enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
+ const char *firmware_name)
{
return -EOPNOTSUPP;
}
-static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
+static inline int qca_read_soc_version(struct hci_dev *hdev,
+ struct qca_btsoc_version *ver,
enum qca_btsoc_type)
{
return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 244b8fe..4c32c60 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1649,7 +1649,7 @@ static int qca_setup(struct hci_uart *hu)
enum qca_btsoc_type soc_type = qca_soc_type(hu);
const char *firmware_name = qca_get_firmware_name(hu);
int ret;
- int soc_ver = 0;
+ struct qca_btsoc_version ver;
ret = qca_check_speeds(hu);
if (ret)
@@ -1678,7 +1678,7 @@ static int qca_setup(struct hci_uart *hu)
if (qca_is_wcn399x(soc_type)) {
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
- ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
+ ret = qca_read_soc_version(hdev, &ver, soc_type);
if (ret)
return ret;
} else {
@@ -1697,15 +1697,14 @@ static int qca_setup(struct hci_uart *hu)
if (!qca_is_wcn399x(soc_type)) {
/* Get QCA version information */
- ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
+ ret = qca_read_soc_version(hdev, &ver, soc_type);
if (ret)
return ret;
}
- bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
/* Setup patch / NVM configurations */
- ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
- firmware_name);
+ ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
+ firmware_name);
if (!ret) {
set_bit(QCA_IBS_ENABLED, &qca->flags);
qca_debugfs_init(hdev);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2020-09-15 22:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-15 15:43 Venkata Lakshmi Narayana Gubba [this message]
2020-09-16 14:27 ` [PATCH v1] Bluetooth: Use NVM files based on SoC ID for WCN3991 Marcel Holtmann
2020-11-19 12:52 ` gubbaven
2020-09-16 18:02 ` Matthias Kaehlcke
2020-11-19 12:50 ` gubbaven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1600184605-31611-1-git-send-email-gubbaven@codeaurora.org \
--to=gubbaven@codeaurora.org \
--cc=abhishekpandit@chromium.org \
--cc=bgodavar@codeaurora.org \
--cc=hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=rjliao@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).