From: Drew Fustini <drew@beagleboard.org>
To: Tony Lindgren <tony@atomide.com>,
Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Jason Kridner <jkridner@beagleboard.org>,
Robert Nelson <robertcnelson@gmail.com>,
Trent Piepho <tpiepho@gmail.com>,
Christina Quast <cquast@hanoverdisplays.com>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: Drew Fustini <drew@beagleboard.org>
Subject: [PATCH v2] ARM: dts: document pinctrl-single,pins when #pinctrl-cells = 2
Date: Sat, 19 Sep 2020 22:08:37 +0200 [thread overview]
Message-ID: <20200919200836.3218536-1-drew@beagleboard.org> (raw)
Document the values in pinctrl-single,pins when #pinctrl-cells = <2>
Fixes: 27c90e5e48d0 ("ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2")
Reported-by: Trent Piepho <tpiepho@gmail.com>
Link: https://lore.kernel.org/linux-omap/3139716.CMS8C0sQ7x@zen.local/
Signed-off-by: Drew Fustini <drew@beagleboard.org>
---
v2 change:
- rephrase to make it clear that the pin conf value and pin mux value
are OR'd together with #pinctrl-cells = <2>
.../bindings/pinctrl/pinctrl-single.txt | 21 ++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index e705acd3612c..f903eb4471f8 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -94,16 +94,23 @@ pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
specified in the pinctrl-bindings.txt document in this directory.
The pin configuration nodes for pinctrl-single are specified as pinctrl
-register offset and value pairs using pinctrl-single,pins. Only the bits
-specified in pinctrl-single,function-mask are updated. For example, setting
-a pin for a device could be done with:
+register offset and values using pinctrl-single,pins. Only the bits specified
+in pinctrl-single,function-mask are updated.
+
+When #pinctrl-cells = 1, then setting a pin for a device could be done with:
pinctrl-single,pins = <0xdc 0x118>;
-Where 0xdc is the offset from the pinctrl register base address for the
-device pinctrl register, and 0x118 contains the desired value of the
-pinctrl register. See the device example and static board pins example
-below for more information.
+Where 0xdc is the offset from the pinctrl register base address for the device
+pinctrl register, and 0x118 contains the desired value of the pinctrl register.
+
+When #pinctrl-cells = 2, then setting a pin for a device could be done with:
+
+ pinctrl-single,pins = <0xdc 0x30 0x07>;
+
+Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value.
+These two values are OR'd together to produce the value stored at offset 0xdc.
+See the device example and static board pins example below for more information.
In case when one register changes more than one pin's mux the
pinctrl-single,bits need to be used which takes three parameters:
--
2.25.1
next reply other threads:[~2020-09-19 20:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-19 20:08 Drew Fustini [this message]
2020-09-23 7:38 ` [PATCH v2] ARM: dts: document pinctrl-single,pins when #pinctrl-cells = 2 Tony Lindgren
2020-09-29 16:51 ` Rob Herring
2020-09-30 9:42 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200919200836.3218536-1-drew@beagleboard.org \
--to=drew@beagleboard.org \
--cc=cquast@hanoverdisplays.com \
--cc=devicetree@vger.kernel.org \
--cc=jkridner@beagleboard.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robertcnelson@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
--cc=tpiepho@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).