From: Tian Tao <tiantao6@hisilicon.com>
To: <airlied@linux.ie>, <daniel@ffwll.ch>, <tzimmermann@suse.de>,
<kraxel@redhat.com>, <alexander.deucher@amd.com>,
<tglx@linutronix.de>, <dri-devel@lists.freedesktop.org>,
<xinliang.liu@linaro.org>, <linux-kernel@vger.kernel.org>
Cc: <linuxarm@huawei.com>
Subject: [PATCH drm/hisilicon v3 1/2] drm/hisilicon: Support i2c driver algorithms for bit-shift adapters
Date: Tue, 22 Sep 2020 20:44:29 +0800 [thread overview]
Message-ID: <1600778670-60370-2-git-send-email-tiantao6@hisilicon.com> (raw)
In-Reply-To: <1600778670-60370-1-git-send-email-tiantao6@hisilicon.com>
Adding driver implementation to support i2c driver algorithms for
bit-shift adapters, so hibmc will using the interface provided by
drm to read edid.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
---
drivers/gpu/drm/hisilicon/hibmc/Makefile | 2 +-
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h | 25 ++++++-
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c | 99 +++++++++++++++++++++++++
3 files changed, 124 insertions(+), 2 deletions(-)
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c
diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
index f991327..684ef79 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
+++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
-hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_ttm.o
+hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_ttm.o hibmc_drm_i2c.o
obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc-drm.o
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
index 197485e..87d2aad 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
@@ -14,11 +14,23 @@
#ifndef HIBMC_DRM_DRV_H
#define HIBMC_DRM_DRV_H
+#include <linux/gpio/consumer.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c.h>
+
+#include <drm/drm_edid.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_framebuffer.h>
struct drm_device;
+struct hibmc_connector {
+ struct drm_connector base;
+
+ struct i2c_adapter adapter;
+ struct i2c_algo_bit_data bit_data;
+};
+
struct hibmc_drm_private {
/* hw */
void __iomem *mmio;
@@ -31,10 +43,20 @@ struct hibmc_drm_private {
struct drm_plane primary_plane;
struct drm_crtc crtc;
struct drm_encoder encoder;
- struct drm_connector connector;
+ struct hibmc_connector connector;
bool mode_config_initialized;
};
+static inline struct hibmc_connector *to_hibmc_connector(struct drm_connector *connector)
+{
+ return container_of(connector, struct hibmc_connector, base);
+}
+
+static inline struct hibmc_drm_private *to_hibmc_drm_private(struct drm_device *dev)
+{
+ return dev->dev_private;
+}
+
void hibmc_set_power_mode(struct hibmc_drm_private *priv,
unsigned int power_mode);
void hibmc_set_current_gate(struct hibmc_drm_private *priv,
@@ -47,6 +69,7 @@ int hibmc_mm_init(struct hibmc_drm_private *hibmc);
void hibmc_mm_fini(struct hibmc_drm_private *hibmc);
int hibmc_dumb_create(struct drm_file *file, struct drm_device *dev,
struct drm_mode_create_dumb *args);
+int hibmc_ddc_create(struct drm_device *drm_dev, struct hibmc_connector *connector);
extern const struct drm_mode_config_funcs hibmc_mode_funcs;
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c
new file mode 100644
index 0000000..86d7120
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Tian Tao <tiantao6@hisilicon.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_probe_helper.h>
+
+#include "hibmc_drm_drv.h"
+
+#define GPIO_DATA 0x0802A0
+#define GPIO_DATA_DIRECTION 0x0802A4
+
+#define I2C_SCL_MASK BIT(0)
+#define I2C_SDA_MASK BIT(1)
+
+static void hibmc_set_i2c_signal(void *data, u32 mask, int value)
+{
+ struct hibmc_connector *hibmc_connector = data;
+ struct hibmc_drm_private *priv = to_hibmc_drm_private(hibmc_connector->base.dev);
+ u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION);
+
+ if (value) {
+ tmp_dir &= ~mask;
+ writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION);
+ } else {
+ u32 tmp_data = readl(priv->mmio + GPIO_DATA);
+
+ tmp_data &= ~mask;
+ writel(tmp_data, priv->mmio + GPIO_DATA);
+
+ tmp_dir |= mask;
+ writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION);
+ }
+}
+
+static int hibmc_get_i2c_signal(void *data, u32 mask)
+{
+ struct hibmc_connector *hibmc_connector = data;
+ struct hibmc_drm_private *priv = to_hibmc_drm_private(hibmc_connector->base.dev);
+ u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION);
+
+ if ((tmp_dir & mask) != mask) {
+ tmp_dir &= ~mask;
+ writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION);
+ }
+
+ return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0;
+}
+
+static void hibmc_ddc_setsda(void *data, int state)
+{
+ hibmc_set_i2c_signal(data, I2C_SDA_MASK, state);
+}
+
+static void hibmc_ddc_setscl(void *data, int state)
+{
+ hibmc_set_i2c_signal(data, I2C_SCL_MASK, state);
+}
+
+static int hibmc_ddc_getsda(void *data)
+{
+ return hibmc_get_i2c_signal(data, I2C_SDA_MASK);
+}
+
+static int hibmc_ddc_getscl(void *data)
+{
+ return hibmc_get_i2c_signal(data, I2C_SCL_MASK);
+}
+
+int hibmc_ddc_create(struct drm_device *drm_dev,
+ struct hibmc_connector *connector)
+{
+ connector->adapter.owner = THIS_MODULE;
+ connector->adapter.class = I2C_CLASS_DDC;
+ snprintf(connector->adapter.name, I2C_NAME_SIZE, "HIS i2c bit bus");
+ connector->adapter.dev.parent = &drm_dev->pdev->dev;
+ i2c_set_adapdata(&connector->adapter, connector);
+ connector->adapter.algo_data = &connector->bit_data;
+
+ connector->bit_data.udelay = 20;
+ connector->bit_data.timeout = usecs_to_jiffies(2000);
+ connector->bit_data.data = connector;
+ connector->bit_data.setsda = hibmc_ddc_setsda;
+ connector->bit_data.setscl = hibmc_ddc_setscl;
+ connector->bit_data.getsda = hibmc_ddc_getsda;
+ connector->bit_data.getscl = hibmc_ddc_getscl;
+
+ return i2c_bit_add_bus(&connector->adapter);
+}
--
2.7.4
next prev parent reply other threads:[~2020-09-22 12:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-22 12:44 [PATCH drm/hisilicon v3 0/2] support reading resolutions from EDID Tian Tao
2020-09-22 12:44 ` Tian Tao [this message]
2020-09-22 12:44 ` [PATCH drm/hisilicon v3 2/2] drm/hisilicon: Features to " Tian Tao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1600778670-60370-2-git-send-email-tiantao6@hisilicon.com \
--to=tiantao6@hisilicon.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=kraxel@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=tglx@linutronix.de \
--cc=tzimmermann@suse.de \
--cc=xinliang.liu@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).