From: Zhen Lei <thunder.leizhen@huawei.com>
To: Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh+dt@kernel.org>,
"Jonathan Cameron" <Jonathan.Cameron@Huawei.com>,
devicetree <devicetree@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>,
Libin <huawei.libin@huawei.com>,
Kefeng Wang <wangkefeng.wang@huawei.com>
Subject: [PATCH v6 08/17] ARM: dts: add SD5203 dts
Date: Wed, 30 Sep 2020 11:17:03 +0800 [thread overview]
Message-ID: <20200930031712.2365-9-thunder.leizhen@huawei.com> (raw)
In-Reply-To: <20200930031712.2365-1-thunder.leizhen@huawei.com>
From: Kefeng Wang <wangkefeng.wang@huawei.com>
Add sd5203.dts for Hisilicon SD5203 SoC platform.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/sd5203.dts | 96 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 98 insertions(+)
create mode 100644 arch/arm/boot/dts/sd5203.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae302..1d1262df5c55907 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -357,6 +357,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \
mps2-an399.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+ sd5203.dtb
dtb-$(CONFIG_SOC_IMX1) += \
imx1-ads.dtb \
imx1-apf9328.dtb
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
new file mode 100644
index 000000000000000..3cc9a23910be62e
--- /dev/null
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Hisilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+ model = "Hisilicon SD5203";
+ compatible = "H836ASDJ", "hisilicon,sd5203";
+ interrupt-parent = <&vic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0 {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
+ reg = <0x0>;
+ };
+ };
+
+ memory@30000000 {
+ device_type = "memory";
+ reg = <0x30000000 0x8000000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ vic: interrupt-controller@10130000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x10130000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ refclk125mhz: refclk125mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ timer0: timer@16002000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x16002000 0x1000>;
+ interrupts = <4>;
+ clocks = <&refclk125mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ timer1: timer@16003000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x16003000 0x1000>;
+ interrupts = <5>;
+ clocks = <&refclk125mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ uart0: serial@1600d000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1600d000 0x1000>;
+ bus_id = "uart0";
+ clocks = <&refclk125mhz>;
+ clock-names = "baudclk", "apb_pclk";
+ reg-shift = <2>;
+ interrupts = <17>;
+ };
+
+ uart1: serial@1600c000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1600c000 0x1000>;
+ clocks = <&refclk125mhz>;
+ clock-names = "baudclk", "apb_pclk";
+ reg-shift = <2>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+ };
+};
--
1.8.3
next prev parent reply other threads:[~2020-09-30 3:19 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-30 3:16 [PATCH v6 00/17] add support for Hisilicon SD5203 SoC Zhen Lei
2020-09-30 3:16 ` [PATCH v6 01/17] dt-bindings: mfd: syscon: add some compatible strings for Hisilicon Zhen Lei
2020-09-30 7:11 ` Lee Jones
2020-09-30 7:21 ` Leizhen (ThunderTown)
2020-10-01 6:59 ` Lee Jones
2020-10-10 10:01 ` Leizhen (ThunderTown)
2020-10-01 6:27 ` Krzysztof Kozlowski
2020-09-30 3:16 ` [PATCH v6 02/17] dt-bindings: arm: hisilicon: delete the descriptions of HiP05/HiP06 controllers Zhen Lei
2020-10-01 6:28 ` Krzysztof Kozlowski
2020-09-30 3:16 ` [PATCH v6 03/17] dt-bindings: arm: hisilicon: split the dt-bindings of each controller into a separate file Zhen Lei
2020-10-01 6:32 ` Krzysztof Kozlowski
2020-09-30 3:16 ` [PATCH v6 04/17] dt-bindings: arm: hisilicon: convert Hisilicon board/soc bindings to json-schema Zhen Lei
2020-09-30 3:17 ` [PATCH v6 05/17] dt-bindings: arm: hisilicon: add binding for SD5203 SoC Zhen Lei
2020-09-30 3:17 ` [PATCH v6 06/17] ARM: hisi: add support " Zhen Lei
2020-09-30 3:17 ` [PATCH v6 07/17] ARM: debug: add UART early console support for SD5203 Zhen Lei
2020-09-30 3:17 ` Zhen Lei [this message]
2020-10-01 6:36 ` [PATCH v6 08/17] ARM: dts: add SD5203 dts Krzysztof Kozlowski
2020-09-30 3:17 ` [PATCH v6 09/17] ARM: dts: hisilicon: fix ststem controller compatible node Zhen Lei
2020-09-30 3:17 ` [PATCH v6 10/17] dt-bindings: arm: hisilicon: convert system controller bindings to json-schema Zhen Lei
2020-09-30 3:17 ` [PATCH v6 11/17] dt-bindings: arm: hisilicon: convert hisilicon,cpuctrl " Zhen Lei
2020-10-01 6:40 ` Krzysztof Kozlowski
2020-10-10 10:54 ` Leizhen (ThunderTown)
2020-09-30 3:17 ` [PATCH v6 12/17] dt-bindings: arm: hisilicon: convert hisilicon,pctrl " Zhen Lei
2020-09-30 3:17 ` [PATCH v6 13/17] dt-bindings: arm: hisilicon: convert hisilicon,hip04-fabric " Zhen Lei
2020-09-30 3:17 ` [PATCH v6 14/17] dt-bindings: arm: hisilicon: convert hisilicon,hip04-bootwrapper " Zhen Lei
2020-10-01 6:41 ` Krzysztof Kozlowski
2020-10-10 10:07 ` Leizhen (ThunderTown)
2020-09-30 3:17 ` [PATCH v6 15/17] dt-bindings: arm: hisilicon: convert Hi6220 domain controller " Zhen Lei
2020-10-06 19:04 ` Rob Herring
2020-09-30 3:17 ` [PATCH v6 16/17] dt-bindings: arm: hisilicon: convert hisilicon,hi3798cv200-perictrl " Zhen Lei
2020-10-01 6:35 ` Krzysztof Kozlowski
2020-10-10 10:56 ` Leizhen (ThunderTown)
2020-09-30 3:17 ` [PATCH v6 17/17] dt-bindings: arm: hisilicon: convert LPC controller " Zhen Lei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200930031712.2365-9-thunder.leizhen@huawei.com \
--to=thunder.leizhen@huawei.com \
--cc=Jonathan.Cameron@Huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=huawei.libin@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=wangkefeng.wang@huawei.com \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).