From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Will Deacon <will@kernel.org>
Cc: Evan Green <evgreen@chromium.org>, Tomasz Figa <tfiga@google.com>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
<youlin.pei@mediatek.com>,
Nicolas Boichat <drinkcat@chromium.org>, <anan.sun@mediatek.com>,
<chao.hao@mediatek.com>, <ming-fan.chen@mediatek.com>,
Greg Kroah-Hartman <gregkh@google.com>, <kernel-team@android.com>
Subject: [PATCH v3 18/24] iommu/mediatek: Support master use iova over 32bit
Date: Wed, 30 Sep 2020 15:06:41 +0800 [thread overview]
Message-ID: <20200930070647.10188-19-yong.wu@mediatek.com> (raw)
In-Reply-To: <20200930070647.10188-1-yong.wu@mediatek.com>
After extending v7s, our pagetable already support iova reach
16GB(34bit). the master got the iova via dma_alloc_attrs may reach
34bits, but its HW register still is 32bit. then how to set the
bit32/bit33 iova? this depend on a SMI larb setting(bank_sel).
we separate whole 16GB iova to four banks:
bank: 0: 0~4G; 1: 4~8G; 2: 8-12G; 3: 12-16G;
The bank number is (iova >> 32).
We will preassign which bank the larbs belong to. currently we don't
have a interface for master to adjust its bank number.
Each a bank is a iova_region which is a independent iommu-domain.
the iova range for each iommu-domain can't cross 4G.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 12 +++++++++---
drivers/memory/mtk-smi.c | 7 +++++++
include/soc/mediatek/smi.h | 1 +
3 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 87ca4f47e494..2f26a8242428 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -303,17 +303,23 @@ static void mtk_iommu_config(struct mtk_iommu_data *data,
struct device *dev, bool enable)
{
struct mtk_smi_larb_iommu *larb_mmu;
- unsigned int larbid, portid;
+ unsigned int larbid, portid, domid;
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ const struct mtk_iommu_iova_region *region;
int i;
for (i = 0; i < fwspec->num_ids; ++i) {
larbid = MTK_M4U_TO_LARB(fwspec->ids[i]);
portid = MTK_M4U_TO_PORT(fwspec->ids[i]);
+ domid = MTK_M4U_TO_DOM(fwspec->ids[i]);
+
larb_mmu = &data->larb_imu[larbid];
+ region = data->plat_data->iova_region + domid;
+ larb_mmu->bank[portid] = upper_32_bits(region->iova_base);
- dev_dbg(dev, "%s iommu port: %d\n",
- enable ? "enable" : "disable", portid);
+ dev_dbg(dev, "%s iommu for larb(%s) port %d dom %d bank %d.\n",
+ enable ? "enable" : "disable", dev_name(larb_mmu->dev),
+ portid, domid, larb_mmu->bank[portid]);
if (enable)
larb_mmu->mmu |= MTK_SMI_MMU_EN(portid);
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index ec83f1ac48b1..e94c99ca2883 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -41,6 +41,10 @@
/* mt2712 */
#define SMI_LARB_NONSEC_CON(id) (0x380 + ((id) * 4))
#define F_MMU_EN BIT(0)
+#define BANK_SEL(id) ({ \
+ u32 _id = (id) & 0x3; \
+ (_id << 8 | _id << 10 | _id << 12 | _id << 14); \
+})
/* SMI COMMON */
#define SMI_BUS_SEL 0x220
@@ -85,6 +89,7 @@ struct mtk_smi_larb { /* larb: local arbiter */
const struct mtk_smi_larb_gen *larb_gen;
int larbid;
u32 *mmu;
+ unsigned char *bank;
};
static int mtk_smi_clk_enable(const struct mtk_smi *smi)
@@ -151,6 +156,7 @@ mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
if (dev == larb_mmu[i].dev) {
larb->larbid = i;
larb->mmu = &larb_mmu[i].mmu;
+ larb->bank = larb_mmu[i].bank;
return 0;
}
}
@@ -169,6 +175,7 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
reg |= F_MMU_EN;
+ reg |= BANK_SEL(larb->bank[i]);
writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
}
}
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 9371bf572ab8..4cf445dbbdaa 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -16,6 +16,7 @@
struct mtk_smi_larb_iommu {
struct device *dev;
unsigned int mmu;
+ unsigned char bank[32];
};
/*
--
2.18.0
next prev parent reply other threads:[~2020-09-30 7:10 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-30 7:06 [PATCH v3 00/24] MT8192 IOMMU support Yong Wu
2020-09-30 7:06 ` [PATCH v3 01/24] dt-bindings: iommu: mediatek: Convert IOMMU to DT schema Yong Wu
2020-10-02 10:58 ` Krzysztof Kozlowski
2020-10-02 11:07 ` Krzysztof Kozlowski
2020-10-06 4:26 ` Yong Wu
2020-10-12 17:08 ` Krzysztof Kozlowski
2020-10-13 7:53 ` Yong Wu
2020-09-30 7:06 ` [PATCH v3 02/24] dt-bindings: memory: mediatek: Convert SMI " Yong Wu
2020-10-02 11:04 ` Krzysztof Kozlowski
2020-10-02 11:08 ` Krzysztof Kozlowski
2020-10-06 4:27 ` Yong Wu
2020-10-06 7:15 ` Krzysztof Kozlowski
2020-10-10 6:18 ` Yong Wu
2020-10-12 7:18 ` Krzysztof Kozlowski
2020-10-12 12:01 ` Yong Wu
2020-10-12 13:26 ` Krzysztof Kozlowski
2020-10-13 7:53 ` Yong Wu
2020-09-30 7:06 ` [PATCH v3 03/24] dt-bindings: memory: mediatek: Add a common larb-port header file Yong Wu
2020-09-30 7:06 ` [PATCH v3 04/24] dt-bindings: memory: mediatek: Extend LARB_NR_MAX to 32 Yong Wu
2020-09-30 7:06 ` [PATCH v3 05/24] dt-bindings: memory: mediatek: Add domain definition Yong Wu
2020-09-30 7:06 ` [PATCH v3 06/24] dt-bindings: mediatek: Add binding for mt8192 IOMMU Yong Wu
2020-10-02 11:10 ` Krzysztof Kozlowski
2020-10-06 4:26 ` Yong Wu
2020-10-06 7:19 ` Krzysztof Kozlowski
2020-09-30 7:06 ` [PATCH v3 07/24] iommu/mediatek: Use the common mtk-smi-larb-port.h Yong Wu
2020-09-30 7:06 ` [PATCH v3 08/24] iommu/io-pgtable-arm-v7s: Use ias to check the valid iova in unmap Yong Wu
2020-10-23 11:17 ` Will Deacon
2020-10-26 7:49 ` Yong Wu
2020-09-30 7:06 ` [PATCH v3 09/24] iommu/io-pgtable-arm-v7s: Extend PA34 for MediaTek Yong Wu
2020-10-23 11:22 ` Will Deacon
2020-09-30 7:06 ` [PATCH v3 10/24] iommu/io-pgtable-arm-v7s: Add cfg as a param in some macros Yong Wu
2020-10-23 11:23 ` Will Deacon
2020-09-30 7:06 ` [PATCH v3 11/24] iommu/io-pgtable-arm-v7s: Quad lvl1 pgtable for MediaTek Yong Wu
2020-10-23 11:21 ` Will Deacon
2020-10-26 7:45 ` Yong Wu
2020-10-23 14:10 ` Robin Murphy
2020-10-26 7:41 ` Yong Wu
2020-10-26 11:35 ` Robin Murphy
2020-09-30 7:06 ` [PATCH v3 12/24] iommu/mediatek: Move hw_init into attach_device Yong Wu
2020-09-30 7:06 ` [PATCH v3 13/24] iommu/mediatek: Add device link for smi-common and m4u Yong Wu
2020-09-30 7:06 ` [PATCH v3 14/24] iommu/mediatek: Add pm runtime callback Yong Wu
2020-09-30 7:06 ` [PATCH v3 15/24] iommu/mediatek: Add power-domain operation Yong Wu
2020-09-30 7:06 ` [PATCH v3 16/24] iommu/mediatek: Add iova reserved function Yong Wu
2020-09-30 7:06 ` [PATCH v3 17/24] iommu/mediatek: Add single domain Yong Wu
2020-09-30 7:06 ` Yong Wu [this message]
2020-10-06 7:18 ` [PATCH v3 18/24] iommu/mediatek: Support master use iova over 32bit Krzysztof Kozlowski
2020-09-30 7:06 ` [PATCH v3 19/24] iommu/mediatek: Support up to 34bit iova in tlb flush Yong Wu
2020-09-30 7:06 ` [PATCH v3 20/24] iommu/mediatek: Support report iova 34bit translation fault in ISR Yong Wu
2020-09-30 7:06 ` [PATCH v3 21/24] iommu/mediatek: Add support for multi domain Yong Wu
2020-09-30 7:06 ` [PATCH v3 22/24] iommu/mediatek: Adjust the structure Yong Wu
2020-09-30 7:06 ` [PATCH v3 23/24] iommu/mediatek: Add mt8192 support Yong Wu
2020-09-30 7:06 ` [PATCH v3 24/24] memory: mtk-smi: " Yong Wu
2020-10-02 11:15 ` Krzysztof Kozlowski
2020-10-26 20:08 ` [PATCH v3 00/24] MT8192 IOMMU support Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200930070647.10188-19-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=anan.sun@mediatek.com \
--cc=chao.hao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=evgreen@chromium.org \
--cc=gregkh@google.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=kernel-team@android.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=ming-fan.chen@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@google.com \
--cc=will@kernel.org \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).