From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <vkoul@kernel.org>, <nm@ti.com>, <ssantosh@kernel.org>,
<robh+dt@kernel.org>, <vigneshr@ti.com>
Cc: <dan.j.williams@intel.com>, <t-kristo@ti.com>,
<lokeshvutla@ti.com>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<dmaengine@vger.kernel.org>
Subject: [PATCH 12/18] dmaengine: ti: k3-psil: Add initial map for AM64
Date: Wed, 30 Sep 2020 12:14:06 +0300 [thread overview]
Message-ID: <20200930091412.8020-13-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200930091412.8020-1-peter.ujfalusi@ti.com>
Add initial PSI-L map file for AM64.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/dma/ti/Makefile | 3 +-
drivers/dma/ti/k3-psil-am64.c | 75 +++++++++++++++++++++++++++++++++++
drivers/dma/ti/k3-psil-priv.h | 1 +
drivers/dma/ti/k3-psil.c | 1 +
4 files changed, 79 insertions(+), 1 deletion(-)
create mode 100644 drivers/dma/ti/k3-psil-am64.c
diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile
index 0c67254caee6..bd496efadff7 100644
--- a/drivers/dma/ti/Makefile
+++ b/drivers/dma/ti/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_TI_K3_UDMA_GLUE_LAYER) += k3-udma-glue.o
obj-$(CONFIG_TI_K3_PSIL) += k3-psil.o \
k3-psil-am654.o \
k3-psil-j721e.o \
- k3-psil-j7200.o
+ k3-psil-j7200.o \
+ k3-psil-am64.o
obj-$(CONFIG_TI_DMA_CROSSBAR) += dma-crossbar.o
diff --git a/drivers/dma/ti/k3-psil-am64.c b/drivers/dma/ti/k3-psil-am64.c
new file mode 100644
index 000000000000..e88f57a36ac1
--- /dev/null
+++ b/drivers/dma/ti/k3-psil-am64.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_ETHERNET(x, ch, flow_base, flow_cnt) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 16, \
+ .mapped_channel_id = ch, \
+ .flow_start = flow_base, \
+ .flow_num = flow_cnt, \
+ .default_flow_id = flow_base, \
+ }, \
+ }
+
+#define PSIL_SAUL(x, ch, flow_base, flow_cnt, default_flow, tx) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 64, \
+ .mapped_channel_id = ch, \
+ .flow_start = flow_base, \
+ .flow_num = flow_cnt, \
+ .default_flow_id = default_flow, \
+ .notdpkt = tx, \
+ }, \
+ }
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+static struct psil_ep am64_src_ep_map[] = {
+ /* SA2UL */
+ PSIL_SAUL(0x4000, 17, 32, 8, 32, 0),
+ PSIL_SAUL(0x4001, 18, 32, 8, 33, 0),
+ PSIL_SAUL(0x4002, 19, 40, 8, 40, 0),
+ PSIL_SAUL(0x4003, 20, 40, 8, 41, 0),
+ /* CPSW3G */
+ PSIL_ETHERNET(0x4500, 16, 16, 16),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+static struct psil_ep am64_dst_ep_map[] = {
+ /* SA2UL */
+ PSIL_SAUL(0xc000, 24, 80, 8, 80, 1),
+ PSIL_SAUL(0xc001, 25, 88, 8, 88, 1),
+ /* CPSW3G */
+ PSIL_ETHERNET(0xc500, 16, 16, 8),
+ PSIL_ETHERNET(0xc501, 17, 24, 8),
+ PSIL_ETHERNET(0xc502, 18, 32, 8),
+ PSIL_ETHERNET(0xc503, 19, 40, 8),
+ PSIL_ETHERNET(0xc504, 20, 48, 8),
+ PSIL_ETHERNET(0xc505, 21, 56, 8),
+ PSIL_ETHERNET(0xc506, 22, 64, 8),
+ PSIL_ETHERNET(0xc507, 23, 72, 8),
+};
+
+struct psil_ep_map am64_ep_map = {
+ .name = "am64",
+ .src = am64_src_ep_map,
+ .src_count = ARRAY_SIZE(am64_src_ep_map),
+ .dst = am64_dst_ep_map,
+ .dst_count = ARRAY_SIZE(am64_dst_ep_map),
+};
diff --git a/drivers/dma/ti/k3-psil-priv.h b/drivers/dma/ti/k3-psil-priv.h
index b4b0fb359eff..b74e192e3c2d 100644
--- a/drivers/dma/ti/k3-psil-priv.h
+++ b/drivers/dma/ti/k3-psil-priv.h
@@ -40,5 +40,6 @@ struct psil_endpoint_config *psil_get_ep_config(u32 thread_id);
extern struct psil_ep_map am654_ep_map;
extern struct psil_ep_map j721e_ep_map;
extern struct psil_ep_map j7200_ep_map;
+extern struct psil_ep_map am64_ep_map;
#endif /* K3_PSIL_PRIV_H_ */
diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c
index 837853aab95a..9da3027a6fbb 100644
--- a/drivers/dma/ti/k3-psil.c
+++ b/drivers/dma/ti/k3-psil.c
@@ -20,6 +20,7 @@ static const struct soc_device_attribute k3_soc_devices[] = {
{ .family = "AM65X", .data = &am654_ep_map },
{ .family = "J721E", .data = &j721e_ep_map },
{ .family = "J7200", .data = &j7200_ep_map },
+ { .family = "AM64", .data = &am64_ep_map },
{ /* sentinel */ }
};
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-09-30 9:14 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-30 9:13 [PATCH 00/18] dmaengine/soc: k3-udma: Add support for BCDMA and PKTDMA Peter Ujfalusi
2020-09-30 9:13 ` [PATCH 01/18] dmaengine: of-dma: Add support for optional router configuration callback Peter Ujfalusi
2020-10-07 5:44 ` Vinod Koul
2020-10-07 8:08 ` Peter Ujfalusi
2020-10-07 15:55 ` Vinod Koul
2020-10-08 6:41 ` Peter Ujfalusi
2020-10-28 5:55 ` Vinod Koul
2020-10-28 9:56 ` Peter Ujfalusi
2020-11-09 11:45 ` Vinod Koul
2020-11-09 12:09 ` Peter Ujfalusi
2020-11-09 12:23 ` Vinod Koul
2020-11-09 12:36 ` Peter Ujfalusi
2020-09-30 9:13 ` [PATCH 02/18] dmaengine: Add support for per channel coherency handling Peter Ujfalusi
2020-09-30 9:13 ` [PATCH 03/18] dmaengine: doc: client: Update for dmaengine_get_dma_device() usage Peter Ujfalusi
2020-09-30 9:13 ` [PATCH 04/18] dmaengine: dmatest: Use dmaengine_get_dma_device Peter Ujfalusi
2020-09-30 9:13 ` [PATCH 05/18] dmaengine: ti: k3-udma: Wait for peer teardown completion if supported Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 06/18] dmaengine: ti: k3-udma: Add support for second resource range from sysfw Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 07/18] dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API Peter Ujfalusi
2020-10-07 6:53 ` Vinod Koul
2020-10-07 8:22 ` Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 08/18] dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 09/18] dt-bindings: dma: ti: Add document for K3 BCDMA Peter Ujfalusi
2020-10-01 6:49 ` Peter Ujfalusi
2020-10-06 19:23 ` Rob Herring
2020-10-06 19:29 ` Rob Herring
2020-10-07 9:09 ` Peter Ujfalusi
2020-10-07 15:46 ` Rob Herring
2020-10-08 8:40 ` Peter Ujfalusi
2020-10-08 19:15 ` Rob Herring
2020-10-09 8:06 ` Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 10/18] dt-bindings: dma: ti: Add document for K3 PKTDMA Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 11/18] dmaengine: ti: k3-psil: Extend psil_endpoint_config " Peter Ujfalusi
2020-09-30 9:14 ` Peter Ujfalusi [this message]
2020-09-30 9:14 ` [PATCH 13/18] dmaengine: ti: Add support for k3 event routers Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 14/18] soc: ti: k3-ringacc: add AM64 DMA rings support Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 15/18] dmaengine: ti: k3-udma: Initial support for K3 BCDMA Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 16/18] dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 17/18] dmaengine: ti: k3-udma: Initial support for K3 PKTDMA Peter Ujfalusi
2020-09-30 9:14 ` [PATCH 18/18] dmaengine: ti: k3-udma-glue: Add " Peter Ujfalusi
2020-09-30 10:17 ` [PATCH 00/18] dmaengine/soc: k3-udma: Add support for BCDMA and PKTDMA Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200930091412.8020-13-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).