From: Samuel Holland <samuel@sholland.org>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Ondrej Jirman <megous@megous.com>,
alsa-devel@alsa-project.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Samuel Holland <samuel@sholland.org>
Subject: [PATCH 19/25] ASoC: sun8i-codec: Constrain to compatible sample rates
Date: Wed, 30 Sep 2020 21:11:42 -0500 [thread overview]
Message-ID: <20201001021148.15852-20-samuel@sholland.org> (raw)
In-Reply-To: <20201001021148.15852-1-samuel@sholland.org>
While another stream is active, only allow userspace to use sample rates
that are compatible with the current SYSCLK frequency. This ensures the
actual sample rate will always match what is given in hw_params.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
sound/soc/sunxi/sun8i-codec.c | 59 ++++++++++++++++++++++++++++++++---
1 file changed, 55 insertions(+), 4 deletions(-)
diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index 43b4319e3d84..501af64d43a0 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -121,16 +121,18 @@ struct sun8i_codec_quirks {
bool lrck_inversion : 1;
};
struct sun8i_codec {
struct regmap *regmap;
struct clk *clk_module;
const struct sun8i_codec_quirks *quirks;
struct sun8i_codec_aif aifs[NAIFS];
+ unsigned int sysclk_rate;
+ int sysclk_refcnt;
};
static int sun8i_codec_runtime_resume(struct device *dev)
{
struct sun8i_codec *scodec = dev_get_drvdata(dev);
int ret;
regcache_cache_only(scodec->regmap, false);
@@ -319,16 +321,57 @@ static int sun8i_codec_set_tdm_slot(struct snd_soc_dai *dai,
return -EINVAL;
aif->slots = slots;
aif->slot_width = slot_width;
return 0;
}
+static const unsigned int sun8i_codec_rates[] = {
+ 7350, 8000, 11025, 12000, 14700, 16000, 22050, 24000,
+ 29400, 32000, 44100, 48000, 88200, 96000, 176400, 192000,
+};
+
+static const struct snd_pcm_hw_constraint_list sun8i_codec_all_rates = {
+ .list = sun8i_codec_rates,
+ .count = ARRAY_SIZE(sun8i_codec_rates),
+};
+
+static const struct snd_pcm_hw_constraint_list sun8i_codec_22M_rates = {
+ .list = sun8i_codec_rates,
+ .count = ARRAY_SIZE(sun8i_codec_rates),
+ .mask = 0x5555,
+};
+
+static const struct snd_pcm_hw_constraint_list sun8i_codec_24M_rates = {
+ .list = sun8i_codec_rates,
+ .count = ARRAY_SIZE(sun8i_codec_rates),
+ .mask = 0xaaaa,
+};
+
+static int sun8i_codec_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct sun8i_codec *scodec = snd_soc_dai_get_drvdata(dai);
+ const struct snd_pcm_hw_constraint_list *list;
+
+ if (!scodec->sysclk_refcnt)
+ list = &sun8i_codec_all_rates;
+ else if (scodec->sysclk_rate == 22579200)
+ list = &sun8i_codec_22M_rates;
+ else if (scodec->sysclk_rate == 24576000)
+ list = &sun8i_codec_24M_rates;
+ else
+ return -EINVAL;
+
+ return snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE, list);
+}
+
struct sun8i_codec_clk_div {
u8 div;
u8 val;
};
static const struct sun8i_codec_clk_div sun8i_codec_bclk_div[] = {
{ .div = 1, .val = 0 },
{ .div = 2, .val = 1 },
@@ -341,22 +384,21 @@ static const struct sun8i_codec_clk_div sun8i_codec_bclk_div[] = {
{ .div = 32, .val = 8 },
{ .div = 48, .val = 9 },
{ .div = 64, .val = 10 },
{ .div = 96, .val = 11 },
{ .div = 128, .val = 12 },
{ .div = 192, .val = 13 },
};
-static u8 sun8i_codec_get_bclk_div(struct sun8i_codec *scodec,
+static u8 sun8i_codec_get_bclk_div(unsigned int sysclk_rate,
unsigned int lrck_div_order,
unsigned int sample_rate)
{
- unsigned long clk_rate = clk_get_rate(scodec->clk_module);
- unsigned int div = clk_rate / sample_rate >> lrck_div_order;
+ unsigned int div = sysclk_rate / sample_rate >> lrck_div_order;
unsigned int best_val = 0, best_diff = ~0;
int i;
for (i = 0; i < ARRAY_SIZE(sun8i_codec_bclk_div); i++) {
const struct sun8i_codec_clk_div *bdiv = &sun8i_codec_bclk_div[i];
unsigned int diff = abs(bdiv->div - div);
if (diff < best_diff) {
@@ -383,16 +425,17 @@ static int sun8i_codec_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct sun8i_codec *scodec = snd_soc_dai_get_drvdata(dai);
struct sun8i_codec_aif *aif = &scodec->aifs[dai->id];
unsigned int sample_rate = params_rate(params);
unsigned int slots = aif->slots ?: params_channels(params);
unsigned int slot_width = aif->slot_width ?: params_width(params);
+ unsigned int sysclk_rate = clk_get_rate(scodec->clk_module);
int lrck_div_order, word_size;
u8 bclk_div;
/* word size */
switch (params_width(params)) {
case 8:
word_size = 0x0;
break;
@@ -418,46 +461,54 @@ static int sun8i_codec_hw_params(struct snd_pcm_substream *substream,
if (lrck_div_order < 0)
return lrck_div_order;
regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK,
(lrck_div_order - 4) << SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV);
/* BCLK divider (SYSCLK/BCLK ratio) */
- bclk_div = sun8i_codec_get_bclk_div(scodec, lrck_div_order, sample_rate);
+ bclk_div = sun8i_codec_get_bclk_div(sysclk_rate, lrck_div_order, sample_rate);
regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK,
bclk_div << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV);
+ if (!aif->open_streams) {
+ scodec->sysclk_rate = sysclk_rate;
+ scodec->sysclk_refcnt++;
+ }
+
aif->sample_rate = sample_rate;
aif->open_streams |= BIT(substream->stream);
return sun8i_codec_update_sample_rate(scodec);
}
static int sun8i_codec_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct sun8i_codec *scodec = snd_soc_dai_get_drvdata(dai);
struct sun8i_codec_aif *aif = &scodec->aifs[dai->id];
if (aif->open_streams != BIT(substream->stream))
goto done;
+ scodec->sysclk_refcnt--;
+
aif->sample_rate = 0;
done:
aif->open_streams &= ~BIT(substream->stream);
return 0;
}
static const struct snd_soc_dai_ops sun8i_codec_dai_ops = {
.set_fmt = sun8i_codec_set_fmt,
.set_tdm_slot = sun8i_codec_set_tdm_slot,
+ .startup = sun8i_codec_startup,
.hw_params = sun8i_codec_hw_params,
.hw_free = sun8i_codec_hw_free,
};
static struct snd_soc_dai_driver sun8i_codec_dais[] = {
{
.name = "sun8i-codec-aif1",
.id = AIF1,
--
2.26.2
next prev parent reply other threads:[~2020-10-01 2:14 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 2:11 [PATCH 00/25] ASoC: sun8i-codec: support for AIF2 and AIF3 Samuel Holland
2020-10-01 2:11 ` [PATCH 01/25] ASoC: sun8i-codec: Set up clock tree at probe time Samuel Holland
2020-10-05 9:53 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 02/25] ASoC: sun8i-codec: Swap module clock/reset dependencies Samuel Holland
2020-10-05 9:54 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 03/25] ASoC: sun8i-codec: Sort DAPM controls, widgets, and routes Samuel Holland
2020-10-05 9:54 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 04/25] ASoC: sun8i-codec: Consistently name DAPM widgets " Samuel Holland
2020-10-05 9:57 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 05/25] ASoC: sun8i-codec: Correct DAPM widget types Samuel Holland
2020-10-05 9:57 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 06/25] ASoC: sun8i-codec: Fix AIF widget channel references Samuel Holland
2020-10-05 10:00 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 07/25] ASoC: sun8i-codec: Enable AIF mono/stereo control Samuel Holland
2020-10-05 10:00 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 08/25] ASoC: sun8i-codec: Use snd_soc_dai_get_drvdata Samuel Holland
2020-10-05 10:01 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 09/25] ASoC: sun8i-codec: Prepare to extend the DAI driver Samuel Holland
2020-10-05 11:24 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 10/25] ASoC: sun8i-codec: Program format before clock inversion Samuel Holland
2020-10-05 11:26 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 11/25] ASoC: sun8i-codec: Enable all supported clock inversions Samuel Holland
2020-10-05 11:30 ` Maxime Ripard
2020-10-06 4:29 ` Samuel Holland
2020-10-08 12:59 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 12/25] ASoC: sun8i-codec: Program the correct word size Samuel Holland
2020-10-05 11:30 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 13/25] ASoC: sun8i-codec: Round up the LRCK divisor Samuel Holland
2020-10-05 11:31 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 14/25] ASoC: sun8i-codec: Correct the BCLK divisor calculation Samuel Holland
2020-10-05 11:34 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 15/25] ASoC: sun8i-codec: Support the TDM slot binding Samuel Holland
2020-10-05 11:34 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 16/25] ASoC: sun8i-codec: Enforce symmetric DAI parameters Samuel Holland
2020-10-05 11:39 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 17/25] ASoC: sun8i-codec: Enable all supported sample rates Samuel Holland
2020-10-05 11:39 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 18/25] ASoC: sun8i-codec: Automatically set the system sample rate Samuel Holland
2020-10-05 11:58 ` Maxime Ripard
2020-10-01 2:11 ` Samuel Holland [this message]
2020-10-05 11:59 ` [PATCH 19/25] ASoC: sun8i-codec: Constrain to compatible sample rates Maxime Ripard
2020-10-01 2:11 ` [PATCH 20/25] ASoC: sun8i-codec: Protect the clock rate while streams are open Samuel Holland
2020-10-01 13:27 ` kernel test robot
2020-10-05 12:01 ` Maxime Ripard
2020-10-05 13:15 ` Chen-Yu Tsai
2020-10-06 4:46 ` Samuel Holland
2020-10-06 4:43 ` Samuel Holland
2020-10-08 13:02 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 21/25] ASoC: sun8i-codec: Require an exact BCLK divisor match Samuel Holland
2020-10-05 12:01 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 22/25] ASoC: sun8i-codec: Enable all supported PCM formats Samuel Holland
2020-10-05 12:02 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 23/25] ASoC: sun8i-codec: Generalize AIF clock control Samuel Holland
2020-10-05 12:04 ` Maxime Ripard
2020-10-06 4:51 ` Samuel Holland
2020-10-12 11:17 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 24/25] ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF2 Samuel Holland
2020-10-05 12:05 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 25/25] ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF3 Samuel Holland
2020-10-05 17:54 ` [PATCH 00/25] ASoC: sun8i-codec: support for AIF2 and AIF3 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001021148.15852-20-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=megous@megous.com \
--cc=mripard@kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).