From: Krzysztof Kozlowski <krzk@kernel.org>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [RESEND PATCH v3] arm64: dts: renesas: align GPIO hog names with dtschema
Date: Fri, 2 Oct 2020 18:39:45 +0200 [thread overview]
Message-ID: <20201002163945.7885-1-krzk@kernel.org> (raw)
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../boot/dts/renesas/r8a77951-salvator-xs.dts | 2 +-
.../boot/dts/renesas/r8a77965-salvator-xs.dts | 2 +-
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 14 +++++++-------
3 files changed, 9 insertions(+), 9 deletions(-)
The dt-schema changes were applied.
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
index cef9da4376a3..e5922329a4b8 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
@@ -118,7 +118,7 @@
};
&pca9654 {
- pcie_sata_switch {
+ pcie-sata-switch-hog {
gpio-hog;
gpios = <7 GPIO_ACTIVE_HIGH>;
output-low; /* enable SATA by default */
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
index 5cef64605464..d7e621101af7 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
@@ -55,7 +55,7 @@
};
&pca9654 {
- pcie_sata_switch {
+ pcie-sata-switch-hog {
gpio-hog;
gpios = <7 GPIO_ACTIVE_HIGH>;
output-low; /* enable SATA by default */
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 202177706cde..e9ed2597f1c2 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -143,49 +143,49 @@
interrupt-parent = <&gpio6>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
- audio_out_off {
+ audio-out-off-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
output-high;
line-name = "Audio_Out_OFF";
};
- hub_pwen {
+ hub-pwen-hog {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "HUB pwen";
};
- hub_rst {
+ hub-rst-hog {
gpio-hog;
gpios = <7 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "HUB rst";
};
- otg_extlpn {
+ otg-extlpn-hog {
gpio-hog;
gpios = <9 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "OTG EXTLPn";
};
- otg_offvbusn {
+ otg-offvbusn-hog {
gpio-hog;
gpios = <8 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "OTG OFFVBUSn";
};
- sd-wifi-mux {
+ sd-wifi-mux-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_HIGH>;
output-low; /* Connect WL1837 */
line-name = "SD WiFi mux";
};
- snd_rst {
+ snd-rst-hog {
gpio-hog;
gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
output-high;
--
2.17.1
next reply other threads:[~2020-10-02 16:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-02 16:39 Krzysztof Kozlowski [this message]
2020-10-05 7:53 ` [RESEND PATCH v3] arm64: dts: renesas: align GPIO hog names with dtschema Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201002163945.7885-1-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).