From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Mathias Nyman <mathias.nyman@intel.com>,
Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
Serge Semin <fancer.lancer@gmail.com>,
Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Manu Gautam <mgautam@codeaurora.org>,
Roger Quadros <rogerq@ti.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>, <linux-usb@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 01/18] dt-bindings: usb: usb-hcd: Convert generic USB properties to DT schema
Date: Sun, 11 Oct 2020 01:41:04 +0300 [thread overview]
Message-ID: <20201010224121.12672-2-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20201010224121.12672-1-Sergey.Semin@baikalelectronics.ru>
The generic USB HCD properties have been described in the legacy bindings
text file: Documentation/devicetree/bindings/usb/generic.txt . Let's
convert it' content into the USB HCD DT schema properties so all USB DT
nodes would be validated to have them properly utilized.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
.../devicetree/bindings/usb/generic.txt | 57 -------------
.../devicetree/bindings/usb/usb-hcd.yaml | 84 +++++++++++++++++++
2 files changed, 84 insertions(+), 57 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/generic.txt
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
deleted file mode 100644
index ba472e7aefc9..000000000000
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Generic USB Properties
-
-Optional properties:
- - maximum-speed: tells USB controllers we want to work up to a certain
- speed. Valid arguments are "super-speed-plus",
- "super-speed", "high-speed", "full-speed" and
- "low-speed". In case this isn't passed via DT, USB
- controllers should default to their maximum HW
- capability.
- - dr_mode: tells Dual-Role USB controllers that we want to work on a
- particular mode. Valid arguments are "host",
- "peripheral" and "otg". In case this attribute isn't
- passed via DT, USB DRD controllers should default to
- OTG.
- - phy_type: tells USB controllers that we want to configure the core to support
- a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
- selected. Valid arguments are "utmi" and "utmi_wide".
- In case this isn't passed via DT, USB controllers should
- default to HW capability.
- - otg-rev: tells usb driver the release number of the OTG and EH supplement
- with which the device and its descriptors are compliant,
- in binary-coded decimal (i.e. 2.0 is 0200H). This
- property is used if any real OTG features(HNP/SRP/ADP)
- is enabled, if ADP is required, otg-rev should be
- 0x0200 or above.
- - companion: phandle of a companion
- - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP
- is the basic function of real OTG except you want it
- to be a srp-capable only B device.
- - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is
- optional for OTG device.
- - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is
- optional for OTG device.
- - usb-role-switch: boolean, indicates that the device is capable of assigning
- the USB data role (USB host or USB device) for a given
- USB connector, such as Type-C, Type-B(micro).
- see connector/usb-connector.yaml.
- - role-switch-default-mode: indicating if usb-role-switch is enabled, the
- device default operation mode of controller while usb
- role is USB_ROLE_NONE. Valid arguments are "host" and
- "peripheral". Defaults to "peripheral" if not
- specified.
-
-
-This is an attribute to a USB controller such as:
-
-dwc3@4a030000 {
- compatible = "synopsys,dwc3";
- reg = <0x4a030000 0xcfff>;
- interrupts = <0 92 4>
- usb-phy = <&usb2_phy>, <&usb3,phy>;
- maximum-speed = "super-speed";
- dr_mode = "otg";
- phy_type = "utmi_wide";
- otg-rev = <0x0200>;
- adp-disable;
-};
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 7263b7f2b510..815de24127db 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -22,9 +22,93 @@ properties:
description:
Name specifier for the USB PHY
+ maximum-speed:
+ description: |
+ Tells USB controllers we want to work up to a certain speed. In case this
+ isn't passed via DT, USB controllers should default to their maximum HW
+ capability.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: ["low-speed", "full-speed", "high-speed", "super-speed",
+ "super-speed-plus"]
+
+ dr_mode:
+ description: |
+ Tells Dual-Role USB controllers that we want to work on a particular
+ mode. In case this attribute isn't passed via DT, USB DRD controllers
+ should default to OTG.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: ["host", "peripheral", "otg"]
+
+ phy_type:
+ description: |
+ Tells USB controllers that we want to configure the core to support a
+ UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In case
+ this isn't passed via DT, USB controllers should default to HW
+ capability.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: ["utmi", "utmi_wide"]
+
+ otg-rev:
+ description: |
+ Tells usb driver the release number of the OTG and EH supplement with
+ which the device and its descriptors are compliant, in binary-coded
+ decimal (i.e. 2.0 is 0200H). This property is used if any real OTG
+ features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be
+ 0x0200 or above.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ companion:
+ description: Phandle of a companion device
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ hnp-disable:
+ description: |
+ Tells OTG controllers we want to disable OTG HNP. Normally HNP is the
+ basic function of real OTG except you want it to be a srp-capable only B
+ device.
+ type: boolean
+
+ srp-disable:
+ description: |
+ Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG
+ device.
+ type: boolean
+
+ adp-disable:
+ description: |
+ Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG
+ device.
+ type: boolean
+
+ usb-role-switch:
+ description: |
+ Indicates that the device is capable of assigning the USB data role
+ (USB host or USB device) for a given USB connector, such as Type-C,
+ Type-B(micro). See connector/usb-connector.yaml.
+
+ role-switch-default-mode:
+ description: |
+ Indicates if usb-role-switch is enabled, the device default operation
+ mode of controller while usb role is USB_ROLE_NONE.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: ["host", "peripheral"]
+ default: "peripheral"
+
examples:
- |
usb {
phys = <&usb2_phy1>, <&usb3_phy1>;
phy-names = "usb";
};
+ - |
+ usb@4a030000 {
+ compatible = "snps,dwc3";
+ reg = <0x4a030000 0xcfff>;
+ interrupts = <0 92 4>;
+ usb-phy = <&usb2_phy>, <&usb3_phy>;
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ otg-rev = <0x0200>;
+ adp-disable;
+ };
--
2.27.0
next prev parent reply other threads:[~2020-10-10 23:00 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-10 22:41 [PATCH 00/18] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema Serge Semin
2020-10-10 22:41 ` Serge Semin [this message]
2020-10-13 12:14 ` [PATCH 01/18] dt-bindings: usb: usb-hcd: Convert generic USB properties to " Rob Herring
2020-10-13 14:00 ` Serge Semin
2020-10-10 22:41 ` [PATCH 02/18] dt-bindings: usb: usb-hcd: Add "wireless" maximum-speed property value Serge Semin
2020-10-11 14:42 ` Greg Kroah-Hartman
2020-10-11 17:53 ` Serge Semin
2020-10-12 15:41 ` Greg Kroah-Hartman
2020-10-12 21:19 ` Serge Semin
2020-10-10 22:41 ` [PATCH 03/18] dt-bindings: usb: usb-hcd: Add "otg-rev" property restriction Serge Semin
2020-10-10 22:41 ` [PATCH 04/18] dt-bindings: usb: usb-hcd: Add "ulpi/serial/hsic" PHY types Serge Semin
2020-10-11 8:49 ` Sergei Shtylyov
2020-10-11 18:03 ` Serge Semin
2020-10-10 22:41 ` [PATCH 05/18] dt-bindings: usb: usb-hcd: Add "tpl-support" property Serge Semin
2020-10-11 8:47 ` Sergei Shtylyov
2020-10-11 18:05 ` Serge Semin
2020-10-11 18:06 ` Serge Semin
2020-10-10 22:41 ` [PATCH 06/18] dt-bindings: usb: usb-hcd: Add generic "usb-phy" property Serge Semin
2020-10-10 22:41 ` [PATCH 07/18] dt-bindings: usb: Convert xHCI bindings to DT schema Serge Semin
2020-10-13 12:30 ` Rob Herring
2020-10-13 14:29 ` Serge Semin
2020-10-10 22:41 ` [PATCH 08/18] dt-bindings: usb: xhci: Add Broadcom STB v2 compatible device Serge Semin
2020-10-10 22:41 ` [PATCH 09/18] dt-bindings: usb: renesas-xhci: Refer to the usb-xhci.yaml file Serge Semin
2020-10-10 22:41 ` [PATCH 10/18] dt-bindings: usb: Convert DWC USB3 bindings to DT schema Serge Semin
2020-10-13 12:36 ` Rob Herring
2020-10-13 15:16 ` Serge Semin
2020-10-10 22:41 ` [PATCH 11/18] dt-bindings: usb: dwc3: Add interrupt-names property support Serge Semin
2020-10-11 8:53 ` Sergei Shtylyov
2020-10-11 18:09 ` Serge Semin
2020-10-10 22:41 ` [PATCH 12/18] dt-bindings: usb: dwc3: Add synopsys,dwc3 compatible string Serge Semin
2020-10-10 22:41 ` [PATCH 13/18] dt-bindings: usb: dwc3: Add Tx De-emphasis restrictions Serge Semin
2020-10-11 8:56 ` Sergei Shtylyov
2020-10-11 18:14 ` Serge Semin
2020-10-10 22:41 ` [PATCH 14/18] dt-bindings: usb: dwc3: Add Frame Length Adj restrictions Serge Semin
2020-10-13 12:38 ` Rob Herring
2020-10-13 15:45 ` Serge Semin
2020-10-10 22:41 ` [PATCH 15/18] dt-bindings: usb: meson-g12a-usb: Discard FL-adj property Serge Semin
2020-10-12 7:54 ` Neil Armstrong
2020-10-12 14:22 ` Serge Semin
2020-10-12 15:01 ` Neil Armstrong
2020-10-12 15:13 ` Serge Semin
2020-10-12 15:29 ` Neil Armstrong
2020-10-10 22:41 ` [PATCH 16/18] dt-bindings: usb: meson-g12a-usb: Validate DWC2/DWC3 sub-nodes Serge Semin
2020-10-12 7:38 ` Neil Armstrong
2020-10-13 12:42 ` Rob Herring
2020-10-13 15:50 ` Serge Semin
2020-10-10 22:41 ` [PATCH 17/18] dt-bindings: usb: keystone-dwc3: Validate DWC3 sub-node Serge Semin
2020-10-11 9:04 ` Sergei Shtylyov
2020-10-11 18:18 ` Serge Semin
2020-10-10 22:41 ` [PATCH 18/18] dt-bindings: usb: qcom,dwc3: " Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201010224121.12672-2-Sergey.Semin@baikalelectronics.ru \
--to=sergey.semin@baikalelectronics.ru \
--cc=Alexey.Malahov@baikalelectronics.ru \
--cc=Pavel.Parkhomenko@baikalelectronics.ru \
--cc=agross@kernel.org \
--cc=balbi@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=khilman@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=mgautam@codeaurora.org \
--cc=narmstrong@baylibre.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).