From: Sia Jee Heng <jee.heng.sia@intel.com>
To: vkoul@kernel.org, Eugeniy.Paltsev@synopsys.com
Cc: andriy.shevchenko@linux.intel.com, dmaengine@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 06/15] dmaengine: dw-axi-dmac: Support device_prep_slave_sg
Date: Mon, 12 Oct 2020 12:21:51 +0800 [thread overview]
Message-ID: <20201012042200.29787-7-jee.heng.sia@intel.com> (raw)
In-Reply-To: <20201012042200.29787-1-jee.heng.sia@intel.com>
Add device_prep_slave_sg() callback function so that DMA_MEM_TO_DEV
and DMA_DEV_TO_MEM operations in single mode can be supported.
Existing AxiDMA driver only support data transfer between
memory to memory. Data transfer between device to memory and
memory to device in single mode would failed if this interface
is not supported by the AxiDMA driver.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
.../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 142 ++++++++++++++++++
drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 1 +
2 files changed, 143 insertions(+)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 16e6934ae9a1..1124c97025f2 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -307,6 +307,22 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
priority << CH_CFG_H_PRIORITY_POS |
DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_DST_POS |
DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_SRC_POS);
+ switch (chan->direction) {
+ case DMA_MEM_TO_DEV:
+ reg |= (chan->config.device_fc ?
+ DWAXIDMAC_TT_FC_MEM_TO_PER_DST :
+ DWAXIDMAC_TT_FC_MEM_TO_PER_DMAC)
+ << CH_CFG_H_TT_FC_POS;
+ break;
+ case DMA_DEV_TO_MEM:
+ reg |= (chan->config.device_fc ?
+ DWAXIDMAC_TT_FC_PER_TO_MEM_SRC :
+ DWAXIDMAC_TT_FC_PER_TO_MEM_DMAC)
+ << CH_CFG_H_TT_FC_POS;
+ break;
+ default:
+ break;
+ }
axi_chan_iowrite32(chan, CH_CFG_H, reg);
write_chan_llp(chan, first->hw_desc[0].llp | lms);
@@ -559,6 +575,129 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
return NULL;
}
+static struct dma_async_tx_descriptor *
+dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
+ unsigned int sg_len,
+ enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+ unsigned int data_width = BIT(chan->chip->dw->hdata->m_data_width);
+ struct axi_dma_hw_desc *hw_desc = NULL;
+ struct axi_dma_desc *desc = NULL;
+ struct scatterlist *sg;
+ unsigned int reg_width;
+ unsigned int mem_width;
+ dma_addr_t reg;
+ unsigned int i;
+ u32 ctllo, ctlhi;
+ size_t block_ts;
+ u32 mem, len;
+ u64 llp = 0;
+ u8 lms = 0; /* Select AXI0 master for LLI fetching */
+
+ if (unlikely(!is_slave_direction(direction) || !sg_len))
+ return NULL;
+
+ chan->direction = direction;
+
+ desc = axi_desc_alloc(sg_len);
+ if (unlikely(!desc))
+ goto err_desc_get;
+
+ switch (direction) {
+ case DMA_MEM_TO_DEV:
+ reg_width = __ffs(chan->config.dst_addr_width);
+ reg = chan->config.dst_addr;
+ ctllo = reg_width << CH_CTL_L_DST_WIDTH_POS |
+ DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS |
+ DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS;
+ break;
+ case DMA_DEV_TO_MEM:
+ reg_width = __ffs(chan->config.src_addr_width);
+ reg = chan->config.src_addr;
+ ctllo = reg_width << CH_CTL_L_SRC_WIDTH_POS |
+ DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
+ DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS;
+ break;
+ default:
+ return NULL;
+ }
+
+ desc->chan = chan;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ mem = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+ hw_desc = &desc->hw_desc[i];
+ mem_width = __ffs(data_width | mem | len);
+ if (mem_width > DWAXIDMAC_TRANS_WIDTH_32)
+ mem_width = DWAXIDMAC_TRANS_WIDTH_32;
+
+ hw_desc->lli = axi_desc_get(chan, &hw_desc->llp);
+ if (unlikely(!hw_desc->lli))
+ goto err_desc_get;
+
+ if (direction == DMA_MEM_TO_DEV)
+ block_ts = len >> mem_width;
+ else
+ block_ts = len >> reg_width;
+
+ ctlhi = CH_CTL_H_LLI_VALID;
+ if (chan->chip->dw->hdata->restrict_axi_burst_len) {
+ u32 burst_len = chan->chip->dw->hdata->axi_rw_burst_len;
+
+ ctlhi |= (CH_CTL_H_ARLEN_EN |
+ burst_len << CH_CTL_H_ARLEN_POS |
+ CH_CTL_H_AWLEN_EN |
+ burst_len << CH_CTL_H_AWLEN_POS);
+ }
+
+ hw_desc->lli->ctl_hi = cpu_to_le32(ctlhi);
+
+ if (direction == DMA_MEM_TO_DEV)
+ ctllo |= mem_width << CH_CTL_L_SRC_WIDTH_POS;
+ else
+ ctllo |= mem_width << CH_CTL_L_DST_WIDTH_POS;
+
+ if (direction == DMA_MEM_TO_DEV) {
+ write_desc_sar(hw_desc, mem);
+ write_desc_dar(hw_desc, reg);
+ } else {
+ write_desc_sar(hw_desc, reg);
+ write_desc_dar(hw_desc, mem);
+ }
+
+ hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
+ ctllo |= (DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
+ DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS);
+ hw_desc->lli->ctl_lo = cpu_to_le32(ctllo);
+
+ set_desc_src_master(hw_desc);
+ }
+
+ if (unlikely(!desc))
+ return NULL;
+
+ /* Set end-of-link to the last link descriptor of list */
+ set_desc_last(&desc->hw_desc[sg_len - 1]);
+
+ /* Managed transfer list */
+ do {
+ hw_desc = &desc->hw_desc[--sg_len];
+ write_desc_llp(hw_desc, llp | lms);
+ llp = hw_desc->llp;
+ } while (sg_len);
+
+ return vchan_tx_prep(&chan->vc, &desc->vd, flags);
+
+err_desc_get:
+ if (desc)
+ axi_desc_put(desc);
+
+ return NULL;
+}
+
static int dw_axi_dma_chan_slave_config(struct dma_chan *dchan,
struct dma_slave_config *config)
{
@@ -938,12 +1077,14 @@ static int dw_probe(struct platform_device *pdev)
/* Set capabilities */
dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
+ dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
/* DMA capabilities */
dw->dma.chancnt = hdata->nr_channels;
dw->dma.src_addr_widths = AXI_DMA_BUSWIDTHS;
dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
dw->dma.directions = BIT(DMA_MEM_TO_MEM);
+ dw->dma.directions |= BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
dw->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
dw->dma.dev = chip->dev;
@@ -959,6 +1100,7 @@ static int dw_probe(struct platform_device *pdev)
dw->dma.device_prep_dma_memcpy = dma_chan_prep_dma_memcpy;
dw->dma.device_synchronize = dw_axi_dma_synchronize;
dw->dma.device_config = dw_axi_dma_chan_slave_config;
+ dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
platform_set_drvdata(pdev, chip);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index a75b921d6b1a..ac49f2e14b0c 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -44,6 +44,7 @@ struct axi_dma_chan {
struct axi_dma_desc *desc;
struct dma_slave_config config;
+ enum dma_transfer_direction direction;
/* these other elements are all protected by vc.lock */
bool is_paused;
};
--
2.18.0
next prev parent reply other threads:[~2020-10-12 4:39 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-12 4:21 [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA Sia Jee Heng
2020-10-12 4:21 ` [PATCH 01/15] dt-bindings: dma: Add YAML schemas for dw-axi-dmac Sia Jee Heng
2020-10-12 4:21 ` [PATCH 02/15] dmaengine: dw-axi-dmac: simplify descriptor management Sia Jee Heng
2020-10-12 4:21 ` [PATCH 03/15] dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources() Sia Jee Heng
2020-10-12 4:21 ` [PATCH 04/15] dmaengine: dw-axi-dmac: Add device_synchronize() callback Sia Jee Heng
2020-10-12 4:21 ` [PATCH 05/15] dmaengine: dw-axi-dmac: Add device_config operation Sia Jee Heng
2020-10-12 4:21 ` Sia Jee Heng [this message]
2020-10-12 4:21 ` [PATCH 07/15] dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic() Sia Jee Heng
2020-10-12 4:21 ` [PATCH 08/15] dmaengine: dw-axi-dmac: Support of_dma_controller_register() Sia Jee Heng
2020-10-12 4:21 ` [PATCH 09/15] dmaengine: dw-axi-dmac: Support burst residue granularity Sia Jee Heng
2020-10-12 4:21 ` [PATCH 10/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support Sia Jee Heng
2020-10-12 4:21 ` [PATCH 11/15] dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA Sia Jee Heng
2020-10-12 4:21 ` [PATCH 12/15] dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields Sia Jee Heng
2020-10-12 4:21 ` [PATCH 13/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake Sia Jee Heng
2020-10-12 4:21 ` [PATCH 14/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers Sia Jee Heng
2020-10-12 4:22 ` [PATCH 15/15] dmaengine: dw-axi-dmac: Set constraint to the Max segment size Sia Jee Heng
2020-10-12 13:59 ` [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA Andy Shevchenko
2020-10-13 5:49 ` Sia, Jee Heng
2020-10-13 7:01 ` Vinod Koul
2020-10-13 7:12 ` Sia, Jee Heng
2020-10-13 7:16 ` Vinod Koul
2020-10-16 14:51 ` Eugeniy Paltsev
2020-10-19 1:22 ` Sia, Jee Heng
2020-10-19 11:39 ` andriy.shevchenko
2020-10-21 1:54 ` Sia, Jee Heng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201012042200.29787-7-jee.heng.sia@intel.com \
--to=jee.heng.sia@intel.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).